Date: Wed, 31 Jan 1996 15:22:51 +0100 From: Norbert Bladt <nbladt@autelca.ascom.ch> To: Joerg Wunsch <joerg_wunsch@uriah.heep.sax.de> Cc: shad@iastate.edu, freebsd-scsi@freebsd.org Subject: Re: 2.1.0 find Adaptec 1740, but not my drives Message-ID: <310F7B3B.2781E494@autelca.ascom.ch> References: <199601310910.KAA19915@uriah.heep.sax.de>
next in thread | previous in thread | raw e-mail | index | archive | help
J Wunsch wrote: > > As Marcus I. Ryan wrote: > > > > ahb0: reading board settings, int=11 > > ahb0 at 0x6000-0x60ff irq 11 on eisa slot 6 > > ahb0 waiting for scsi devices to settle > [ahb driver fails to find any devices] Is this a problem in general with the AHA174x and FBSD-2.1 ? I'll try to upgrade from FBSD-1.1 to FBSD-2.1, soon, and I am using an AHA1742A in my system. I did miss the discussion because I'm just subscribed to the scsi-list. So, can somebody tell me what the real problem is/was that leads to this mail in the scsi-list ? Thanks in advance. I think I tried, at least, to boot the FBSD-2.1 floppy to see whether my NE2000 clone (damn cheap) was detected by FreeBSD-2.1. At the same time I noticed that my disks were detected fine. Of course, all my disks are less than 1GB in size, so that might be different. However, if somebody wants to donate a disk with more than 1GB capacity, fine :-) During the update which will be done soon, I could do some tests, too. I'll backup my DOS and FreeBSD partitions, anyway, prior to do the installation (via the network, I hope). Regards, Norbert. -- Norbert Bladt Management System Software Development ascom Autelca AG Payphone and Cashless Transaction Systems Worbstrasse 201 CH-3073 Guemligen, Switzerland nbladt@autelca.ascom.ch VOICE: +41 31 999 6552, FAX: +41 31 999 6544
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?310F7B3B.2781E494>