Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Feb 2015 12:16:18 +0200
From:      Bogdan SOLGA <bogdan.solga@gmail.com>
To:        Craig Butler <craig001@lerwick.hopto.org>
Cc:        freebsd-fs <freebsd-fs@freebsd.org>
Subject:   Re: A few questions about the FreeBSD GlusterFS port and build
Message-ID:  <CAHHzeCUy2YVfHd%2BDYVQnLqC3ZWiV6r8VmsQFZsXb_2UHqxhtzg@mail.gmail.com>
In-Reply-To: <1423517676.3855.6.camel@atlas.lerwick.hopto.org>
References:  <CAHHzeCUFWLFwHGU1wrShMWW7YUH2vY-B2w2TJ9Wd7MZeOep9Mg@mail.gmail.com> <FE242C1F-64BC-418A-8585-456F076F947C@gluster.org> <1423517676.3855.6.camel@atlas.lerwick.hopto.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello Craig, Justin et all!

Thank you for the provided link! I have tried to install it using the
provided shar <https://bugs.freebsd.org/bugzilla/attachment.cgi?id=149233>;
file; the build works, but 'make install fails' with the following error:
"
On make install:

pkg-static:
lstat(/tmp/glusterfs/work/stage/usr/local/%%PYTHON_SITELIBDIR%%/gluster/):
No such file or directory
*** Error code 74

Stop.
make: stopped in /tmp/glusterfs
"

Am I doing something wrong? or have I skipped / missed any steps?

Thank you!

Kind regards,
Bogdan


On Mon, Feb 9, 2015 at 11:34 PM, Craig Butler <craig001@lerwick.hopto.org>
wrote:

> On Mon, 2015-02-09 at 20:52 +0000, Justin Clift wrote:
> > On 9 Feb 2015, at 19:57, Bogdan SOLGA <bogdan.solga@gmail.com> wrote:
> > > Hello, everyone!
> > >
> > > I have found this
> > > <https://lists.freebsd.org/pipermail/freebsd-fs/2014-June/019669.html>;
> > > thread from June 2014 and tried to build GlusterFS on a local VM, but
> the
> > > build fails with the following error:
> > >
> > > ./configure: 13107: Syntax error: word unexpected (expecting ")")
> > >
> > > I have tried to use the latest 'experimental' build from the GlusterFS
> repo
> > > <http://download.gluster.org/pub/gluster/experimental/>, dated August
> 11th
> > > 2014. I haven't seen any patches for it, I might have missed the page
> which
> > > lists them.
> > >
> > > Does anyone have any updates on the GlusterFS port on FreeBSD?
> According to
> > > this <https://twitter.com/swills/status/480496219236478976>; Twitter
> post,
> > > it seems to work (at least for some platforms and people).
> >
> > In theory :D, the patches for getting it working were merged a while
> back,
> > so the "normal" everyday tarball is supposed to compile fine.
> >
> > There is a port for it around somewhere, too though I've been on leave
> until
> > recently and not caught up with where that's at.  Craig Butler (CC'd) is
> the
> > guy in the know about that. :)
> >
> > We also submitted a patch for FreeBSD's fuse module a few months ago,
> but it
> > doesn't seem to have been looked over yet. :(
> >
> >   https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=192701
> >
> > Does that help? :)
> >
> > Regards and best wishes,
> >
> > Justin Clift
> >
> >
> > > Thank you!
> > >
> > > Regards,
> > > Bogdan
> > > _______________________________________________
> > > freebsd-fs@freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-fs
> > > To unsubscribe, send any mail to "freebsd-fs-unsubscribe@freebsd.org"
> >
> > --
> > GlusterFS - http://www.gluster.org
> >
> > An open source, distributed file system scaling to several
> > petabytes, and handling thousands of clients.
> >
> > My personal twitter: twitter.com/realjustinclift
> >
>
> Hello Justin et al
>
> The commits to bugs.freebsd.org seem to be taking an age to action.  I
> suspect the bug review folks are fairly busy at the moment.
>
> We have a port candidate PR in progress;
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=194409
>
> Unfortunately only seems to be working on 10.1-RELEASE amd64 at the
> moment.
>
> I will work on it this week and see if I can get it to compile on the
> other releases and archs.  Hopefully if I give hrs@ a nudge we can get
> something finally committed.
>
> Bogdan, please feel free to test the port out and send us your feedback.
>
> Kind Regards
>
> Craig Butler
>
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAHHzeCUy2YVfHd%2BDYVQnLqC3ZWiV6r8VmsQFZsXb_2UHqxhtzg>