Date: Thu, 30 Jan 1997 15:24:55 -0600 From: Jon Loeliger <jdl@jdl.com> To: hackers@freebsd.org Subject: 2.2-BETA Install Feedback Message-ID: <199701302124.PAA28195@chrome.jdl.com>
next in thread | raw e-mail | index | archive | help
Freebies,
OK, I *finally* got around to installing 2.2-BETA on a new disk.
Once FTP silliness was eliminated during the install process,
all went fairly smoothly with only minor glitches.
One of the items I was most interested in seeing with this
release was the ATAPI CD ROM code. So I beat on it some
with mixed results.
In particular, I was able to attach, mount and unmount a CD
file system, multiple times and occasionally read from it.
It would happily read files for a while, but then it would
arbitrarily decide to quit. A umount/mount cycle would clear
it up for a while, and the offending file could be read again,
only to wedge elsewhere. Then, after, oh, a dozen mount/umount
cycles, it finally decided there was:
# mount /cdrom
cd9660: /dev/wcd0c: Input/output error
and would no longer work at all. I suspect that a system
reboot would gain me more workable mount/umount cycles again.
Here's what the /var/log/messages looks like, in almost all it's
wonderous glory (I hacked out the X installation messings and
security comments).
Please feel free to contact me, but keep me on the CC: list
as I'm currently NOT subscribed to hackers.
Thanks,
jdl
----------------------------------------------------------------
Jan 29 13:01:44 zinc /kernel: Copyright (c) 1992-1996 FreeBSD Inc.
Jan 29 13:01:44 zinc /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 29 13:01:44 zinc /kernel: The Regents of the University of California. All rights reserved.
Jan 29 13:01:44 zinc /kernel:
Jan 29 13:01:44 zinc /kernel: FreeBSD 2.2-BETA_A #0: Tue Dec 24 03:41:49 1996
Jan 29 13:01:44 zinc /kernel: jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC
Jan 29 13:01:44 zinc /kernel: Calibrating clock(s) relative to mc146818A clock ... i586 clock: 90211771 Hz, i8254 clock: 1193279 Hz
Jan 29 13:01:44 zinc /kernel: CPU: Pentium (90.20-MHz 586-class CPU)
Jan 29 13:01:44 zinc /kernel: Origin = "GenuineIntel" Id = 0x524 Stepping=4
Jan 29 13:01:44 zinc /kernel: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
Jan 29 13:01:44 zinc /kernel: real memory = 16777216 (16384K bytes)
Jan 29 13:01:44 zinc /kernel: avail memory = 14499840 (14160K bytes)
Jan 29 13:01:44 zinc /kernel: Probing for devices on PCI bus 0:
Jan 29 13:01:44 zinc /kernel: chip0 <Intel 82434NX (Neptune) PCI cache memory controller> rev 17 on pci0:0
Jan 29 13:01:45 zinc /kernel: chip1 <Intel 82378IB PCI-ISA bridge> rev 67 on pci0:2
Jan 29 13:01:45 zinc /kernel: vga0 <Display device> rev 0 on pci0:6
Jan 29 13:01:45 zinc /kernel: Probing for devices on the ISA bus:
Jan 29 13:01:45 zinc /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
Jan 29 13:01:45 zinc /kernel: sc0: VGA color <16 virtual consoles, flags=0x0>
Jan 29 13:01:45 zinc /kernel: ed0 at 0x320-0x33f irq 9 msize 8192 on isa
Jan 29 13:01:45 zinc /kernel: ed0: address 00:c0:a8:36:0c:dd, type NE2000 (16 bit)
Jan 29 13:01:45 zinc /kernel: ed1 not found at 0x300
Jan 29 13:01:45 zinc /kernel: fe0 not found at 0x300
Jan 29 13:01:45 zinc /kernel: sio0 not found at 0x3f8
Jan 29 13:01:45 zinc /kernel: sio1 at 0x2f8-0x2ff irq 3 on isa
Jan 29 13:01:45 zinc /kernel: sio1: type 16550A
Jan 29 13:01:45 zinc /kernel: sio2: disabled, not probed.
Jan 29 13:01:45 zinc /kernel: sio3: disabled, not probed.
Jan 29 13:01:45 zinc /kernel: lpt0 at 0x378-0x37f irq 7 on isa
Jan 29 13:01:45 zinc /kernel: lpt0: Interrupt-driven port
Jan 29 13:01:45 zinc /kernel: lp0: TCP/IP capable interface
Jan 29 13:01:45 zinc /kernel: lpt1 at 0x378-0x37f on isa
Jan 29 13:01:45 zinc /kernel: lpt1 not probed due to I/O address conflict with lpt0 at 0x378
Jan 29 13:01:45 zinc /kernel: mse0 not found at 0x23c
Jan 29 13:01:45 zinc /kernel: psm0: disabled, not probed.
Jan 29 13:01:45 zinc /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Jan 29 13:01:45 zinc /kernel: fdc0: NEC 72065B
Jan 29 13:01:45 zinc /kernel: fd0: 1.44MB 3.5in
Jan 29 13:01:45 zinc /kernel: fd1: 1.2MB 5.25in
Jan 29 13:01:45 zinc /kernel: wdc0 at 0x1f0-0x1f7 irq 14 on isa
Jan 29 13:01:45 zinc /kernel: wdc0: unit 0 (wd0): <WDC AC31000H>
Jan 29 13:01:46 zinc /kernel: wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
Jan 29 13:01:46 zinc /kernel: wdc0: unit 1 (wd1): <WDC AC22100H>
Jan 29 13:01:46 zinc /kernel: wd1: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
Jan 29 13:01:46 zinc /kernel: wdc1 at 0x170-0x177 irq 15 on isa
Jan 29 13:01:46 zinc /kernel: wdc1: unit 0 (atapi): <NEC CD-ROM DRIVE:260/4.23>, removable, cmd16
Jan 29 13:01:46 zinc /kernel: atapi1.0: invalid command phase, ireason=0x3, status=40<ready>, error=0
Jan 29 13:01:46 zinc /kernel: bt0 not probed due to I/O address conflict with ed0 at 0x330
Jan 29 13:01:46 zinc /kernel: uha0 not probed due to I/O address conflict with ed0 at 0x330
Jan 29 13:01:46 zinc /kernel: aha0 not probed due to I/O address conflict with ed0 at 0x330
Jan 29 13:01:46 zinc /kernel: aic0 not found at 0x340
Jan 29 13:01:46 zinc /kernel: nca0 not found at 0x1f88
Jan 29 13:01:46 zinc /kernel: nca1 not found at 0x350
Jan 29 13:01:46 zinc /kernel: sea0 not found
Jan 29 13:01:46 zinc /kernel: wt0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: mcd0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: matcdc0 not found at 0x230
Jan 29 13:01:46 zinc /kernel: scd0 not found at 0x230
Jan 29 13:01:46 zinc /kernel: ie0 not found at 0x360
Jan 29 13:01:46 zinc /kernel: ep0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: ix0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: le0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: lnc0 not found at 0x280
Jan 29 13:01:46 zinc /kernel: ze0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: zp0 not found at 0x300
Jan 29 13:01:46 zinc /kernel: npx0 on motherboard
Jan 29 13:01:46 zinc /kernel: npx0: INT 16 interface
Jan 29 13:01:46 zinc /kernel: apm0: disabled, not probed.
Jan 29 13:01:48 zinc lpd[108]: restarted
Jan 29 13:03:12 zinc /kernel: cmd XF86_S3 pid 157 tried to use non-present SYSVSHM
Jan 30 02:15:03 zinc su: jdl to root on /dev/ttyp0
Jan 30 02:25:48 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc0, status=c0<busy,ready>, error=c0
Jan 30 02:25:48 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc8, status=c8<busy,ready,drq>, error=c8<mchg>
Jan 30 02:25:59 zinc /kernel: atapi1.0: controller not ready for cmd
Jan 30 02:26:10 zinc last message repeated 4 times
Jan 30 02:26:24 zinc /kernel: wcd0: media changed
Jan 30 02:53:27 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc0, status=c0<busy,ready>, error=c0
Jan 30 02:53:27 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc8, status=c8<busy,ready,drq>, error=c8<mchg>
Jan 30 02:53:38 zinc /kernel: atapi1.0: controller not ready for cmd
Jan 30 02:53:50 zinc last message repeated 4 times
Jan 30 02:54:16 zinc /kernel: wcd0: media changed
Jan 30 03:32:40 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc0, status=c0<busy,ready>, error=c0
Jan 30 03:32:41 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc8, status=c8<busy,ready,drq>, error=c8<mchg>
Jan 30 03:32:52 zinc /kernel: atapi1.0: controller not ready for cmd
Jan 30 03:33:03 zinc last message repeated 4 times
Jan 30 03:33:25 zinc /kernel: wcd0: media changed
Jan 30 03:36:28 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc0, status=c0<busy,ready>, error=c0
Jan 30 03:36:36 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc8, status=c8<busy,ready,drq>, error=c8<mchg>
Jan 30 03:36:36 zinc /kernel: atapi1.0: controller not ready for cmd
Jan 30 03:36:55 zinc last message repeated 3 times
Jan 30 03:36:55 zinc /kernel: wcd0: media changed
Jan 30 03:36:55 zinc /kernel: wcd0: cannot read audio disc
Jan 30 03:43:24 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc0, status=c0<busy,ready>, error=c0
Jan 30 03:43:24 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc8, status=c8<busy,ready,drq>, error=c8<mchg>
Jan 30 03:43:35 zinc /kernel: atapi1.0: controller not ready for cmd
Jan 30 03:43:47 zinc last message repeated 4 times
Jan 30 03:44:17 zinc /kernel: wcd0: media changed
Jan 30 03:51:00 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc0, status=c0<busy,ready>, error=c0
Jan 30 03:51:08 zinc /kernel: atapi1.0: invalid command phase, ireason=0xc8, status=c8<busy,ready,drq>, error=c8<mchg>
Jan 30 03:51:08 zinc /kernel: atapi1.0: controller not ready for cmd
Jan 30 03:51:25 zinc last message repeated 4 times
Jan 30 03:51:27 zinc /kernel: wcd0: media changed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199701302124.PAA28195>