Date: Thu, 3 Jan 2013 22:06:34 +0800 From: Ganbold Tsagaankhuu <ganbold@gmail.com> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-arm@freebsd.org Subject: Re: Allwinner A10 Message-ID: <CAGtf9xOA4Adc9c11rm30djnsWzoETgTsAROJM06M398z08echw@mail.gmail.com> In-Reply-To: <201212271004.01598.hselasky@c2i.net> References: <CAGtf9xOquNGakvSmRfmN31zqqQ49MMLmGscH5XvpwRoVJ6e3FQ@mail.gmail.com> <201212271004.01598.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hans, I was able to give power to one of usb controllers and now I see ehci: http://pastebin.ca/2299028 But even though devices scbus, da, pass are included in kernel config, it is not detecting ufs freebsd install memstick. But from outside I see the led light of usb stick. Can you advise me the ways to debug or next thing to try for this issue? FYI, USB_DEBUG, USB_REQ_DEBUG, USB_VERBOSE options are enabled in config. thanks, Ganbold On Thu, Dec 27, 2012 at 5:04 PM, Hans Petter Selasky <hselasky@c2i.net> wrote: > On Wednesday 26 December 2012 17:05:35 Ganbold Tsagaankhuu wrote: >> Just some information, >> >> Still nothing useful yet, but with the help of andrew@, ray@, gonzo@ >> and other arm guys kernel boots: >> >> https://github.com/tsgan/allwinner_a10/blob/master/dmesg_ehci.txt >> >> Tried usb/ehci glue code, no success yet, so maybe I will leave it now >> and try next SD/MMC :) >> > > Hi, > > It looks like number of ports is zero. Can you try this: > > Edit sys/dev/usb/controller/ehci.c > > > Find this: > sc->sc_noport = EHCI_HCS_N_PORTS(sparams); > > Add this: > if (sc->sc_noport == 0) > sc->sc_noport = 1; > > Does the EHCI work now? > > --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xOA4Adc9c11rm30djnsWzoETgTsAROJM06M398z08echw>