Date: Sat, 7 Oct 2000 03:08:23 +0200 From: "Johan Huldtgren" <johan.huldtgren@rixtelecom.se> To: <freebsd-stable@FreeBSD.ORG> Subject: pw error Message-ID: <ELEFIKONFJLHDALNCBNDIELBCDAA.johan.huldtgren@rixtelecom.se> In-Reply-To: <20001006173535.A26762@moose.bri.hp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I use pw to add large amounts of users at once, after todays cvsup, build/install[world | kernel] I get the following error: su-2.03> echo password | pw adduser newuser -s /usr/local/noshell -g users -h 0 -k /home/template -m /home/newuser pw: setting crypt(3) format: No such file or directory pw: setting crypt(3) format: No such file or directory su-2.03> I can still add users manually by running adduser, but this is quite a pain. Any ideas? - Johan --------------------- Info: su-2.03# uname -a FreeBSD home.rixtele.com 4.1.1-STABLE FreeBSD 4.1.1-STABLE #0: Fri Oct 6 09:24:59 CEST 2000 satan@home.rixtele.com:/usr/obj/usr/src/sys/EVIL_II i386 su-2.03# dmesg Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-STABLE #0: Fri Oct 6 09:24:59 CEST 2000 satan@home.rixtele.com:/usr/obj/usr/src/sys/EVIL_II Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.41-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 536805376 (524224K bytes) avail memory = 519311360 (507140K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc035c000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443GX host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1 pci2: <PCI bus> on pcib3 ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 19 at device 12.0 on pci0 aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 19 at device 12.1 on pci0 aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 21 at device 14.0 on pci0 fxp0: Ethernet address 00:d0:b7:89:85:80 isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 18.2 irq 21 Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 18.3 on pci0 pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0 pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci3: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 SMP: AP CPU #1 Launched! ad0: 26063MB <FUJITSU MPE3273AT> [52953/16/63] at ata0-master using UDMA33 acd0: CDROM <SONY CDU4811> at ata1-master using PIO4 Waiting 2 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted su-2.03# To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ELEFIKONFJLHDALNCBNDIELBCDAA.johan.huldtgren>