Date: Tue, 13 Jul 1999 20:19:58 +0900 From: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> To: Sam Magee <webadmin@adsight.com> Cc: freebsd-stable@freebsd.org, yokota@zodiac.mech.utsunomiya-u.ac.jp Subject: Re: Upgrade to 3,2-stable and X dies Message-ID: <199907131119.UAA25890@zodiac.mech.utsunomiya-u.ac.jp> In-Reply-To: Your message of "Tue, 13 Jul 1999 06:47:41 -0400." <Pine.BSF.4.02A.9907130639100.433-100000@winter.adsight.com> References: <Pine.BSF.4.02A.9907130639100.433-100000@winter.adsight.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>> Please tell us detail of your mouse: manufacture, model name/number, >> etc. > >Microsoft PS/2 "Mouse port compatible mouse 2.1A" There should be no problem with this mouse. *sigh* >> Does the mouse work in the text console? Please run >> >> vidcontrol -m on >> >> in a text console and see if the mouse cursor moves and "cut & paste" >> works. > >The cursor moves and I can highlight text. This means the mouse and moused are working all right in the text console. >> When did you cvsup the -STABLE source? > >Cvsup'ed July 10 and then again on July 12 for a kernel rebuild. >> >> Check the revision number of /sys/i386/isa/psm.c and >> /usr/src/usr.sbin/moused/moused.c. They should look something like: >> >> * $Id: psm.c,v 1.60.2.x xxxx/xx/xx xx:xx:xx xxxxx Exp $ >> >> * $Id: moused.c,v 1.24.2.x xxxx/xx/xx xx:xx:xx xxxxx Exp $ >> >I believe I have your latest versions: psm.c = 1.60.22 07/23 >and moused = 1.23.2.1 06/03 Would you please be more specific? Please find the line containing "$Id..." in these files. There is no such revision 1.60.22 7/23 for psm.c and 1.23.2.1 06/03 for moused.c. The latest revisions are: psm.c: 1.60.2.2 07/12 moused.c: 1.24.2.1 06/03 >> Please show me the following file. >> >> /var/run/dmesg.boot > >Programming 16 pins in IOAPIC #0 >FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 >eisa0: <MIC54 (System Board)> >Probing for devices on the EISA bus >Probing for devices on PCI bus 0: Ok, you are using a SMP system. Do you have a UP kernel? If so, please see if the UP kernel exhibits the same problem. Also, please check your copy of /etc/make.conf. What is the setting of COPTFLAGS in /etc/make.conf? If you have "-O2" or "-O3" in COPTFLAGS, use "-O" instead, and rebuild the kernel. >> Which version of XFree86 are you trying to use and how did you >> install it? > >I've installed 3.3.3.1 from the 3,2 Release CD and also built >it from the latest port. Both reacted the same. > >> It would also be useful if you could run the X server as follows >> and send me the output. >> >> /usr/X11R6/bin/Xwrapper -probeonly >& /tmp/x.out > >XFree86 Version 3.3.3.1 / X Window System >(protocol Version 11, revision 0, vendor release 6300) >Release Date: December 29 1998 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) >Operating System: FreeBSD 3.0-CURRENT i386 [ELF] >Configured drivers: > S3: accelerated server for S3 graphics adaptors (Patchlevel 0) > newmmio, mmio_928, s3_generic >Using syscons driver with X support (version 2.0) >(using VT number 9) > >XF86Config: /etc/XF86Config >(**) stands for supplied, (--) stands for probed/default values >(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) >(**) Mouse: type: MouseSystems, device: /dev/sysmouse, baudrate: 1200 >(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms) >(**) S3: Graphics device ID: "Diamond Stealth 64 DRAM with S3 Trio64" [...] Hmm, looks good... Kazu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907131119.UAA25890>