Date: Tue, 2 May 2000 15:12:02 -0400 From: Paul.Broome@firstdata.com To: sthaug@nethelp.no Cc: Freebsd-questions@FreeBSD.ORG, FreeBSD-scsi@FreeBSD.ORG, broome@acm.org Subject: Re: CMD CRD-5500 raid controller not recognized by 3.4 release Message-ID: <852568D3.006904AD.00@lnsunr02.firstdata.com>
next in thread | raw e-mail | index | archive | help
Steinar Haug, Ah hmm. Actually no. That sounds like a fundamental missing link. I'm also having problems communicating through the serial link to define the RAID set. I had a null modem cable but looks like I need a straight through serial cable which I also try next. Thank you, Sir. Paul.Broome@FirstData.com sthaug@nethelp.no on 05/02/2000 02:56:37 PM To: Paul Broome/MD/FDMS/FDC@FDC cc: Freebsd-questions@FreeBSD.ORG, FreeBSD-scsi@FreeBSD.ORG, broome@acm.org Subject: Re: CMD CRD-5500 raid controller not recognized by 3.4 release > The problem is that the CRD-5500 controller can be found by the Adaptec 2940 > configuration setup but not by FreeBSD. I thought the 5500 would have been > recognize as just another SCSI disk. Do you have a RAID set defined? Assuming the CRD-5500 works like the CRD-5600, it'll only be recognized as a SCSI disk (and show up in boot messages etc) if a RAID set is defined. Steinar Haug, Nethelp consulting, sthaug@nethelp.no To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?852568D3.006904AD.00>