Date: Mon, 10 Jan 2000 11:23:56 -0500 From: "Matthew B. Henniges" <matt@axl.net> To: "FreeBSD Stable" <freebsd-stable@freebsd.org> Subject: uptime abort trap Message-ID: <NDBBJIOBFAJNKGAGLICJEEDFEDAA.matt@axl.net>
next in thread | raw e-mail | index | archive | help
Hello all-
I have a cronjob in /etc/crontab:
*/1 * * * * root /usr/bin/uptime >>
/var/log/load
about once every 2 days, I find a mail like this in my mailbox.
From: Cron Daemon [root@outlier.axl.net]
Sent: Friday, January 07, 2000 5:11 PM
To: root@outlier.axl.net
Subject: Cron <root@outlier> /usr/bin/uptime >> /var/log/load
Abort trap
Does anybody know what this means?
Thanks in advance for the help.
-Matt
matt@outlier:~> uname -a
FreeBSD outlier.axl.net 3.4-STABLE FreeBSD 3.4-STABLE #0: Mon Dec 20
05:29:28 EST 1999 root@outlier.axl.net:/usr/src/sys/compile/OUTLIER
i386
matt@outlier:~> dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #0: Mon Dec 20 05:29:28 EST 1999
root@outlier.axl.net:/usr/src/sys/compile/OUTLIER
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 258351104 (252296K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0258000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <ATI model 4756 graphics accelerator> rev 0x7a int a irq 18 on
pci0.11.0
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> rev 0x00 int a irq 16 on pci0.15.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 19 on pci0.17.0
xl0: Ethernet address: 00:50:04:63:36:2f
xl0: autoneg complete, link status good (full-duplex, 100Mbps)
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to accept, logging limited to 250 packets/entry by default
Waiting 10 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changingda0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS 10K 9WLS UC8A> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <QUANTUM ATLAS 10K 9WLS UC8A> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
Matthew B. Henniges
Axl.net Communications
http://www.axl.net
(203) 552-1714
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NDBBJIOBFAJNKGAGLICJEEDFEDAA.matt>