Date: Wed, 11 Mar 1998 21:00:38 -0600 From: Tom Jackson <toj@gorillanet.gorilla.net> To: "Justin T. Gibbs" <gibbs@plutotech.com>, freebsd-current@FreeBSD.ORG Subject: Re: CAM testimonials? Message-ID: <19980311210038.28154@TOJ.org> In-Reply-To: <199803111803.LAA22230@pluto.plutotech.com>; from Justin T. Gibbs on Wed, Mar 11, 1998 at 11:00:08AM -0700 References: <199803111803.LAA22230@pluto.plutotech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii On Wed, Mar 11, 1998 at 11:00:08AM -0700, Justin T. Gibbs wrote: > ------- Blind-Carbon-Copy > > X-Mailer: exmh version 2.0.1 12/23/97 > To: scsi@FreeBSD.org > Subject: CAM testimonials? > Mime-Version: 1.0 > Content-Type: text/plain; charset=us-ascii > Date: Wed, 11 Mar 1998 11:00:08 -0700 > From: "Justin T. Gibbs" <gibbs@narnia.plutotech.com> > > I haven't gotten much feedback on the latest CAM snapshot. If you are > running CAM, I'd appreciate a small note listing your configuration along > with any other comments you have. > > Thanks! > - -- > Justin > Any idea why I'm getting seg11 with dset and dmesg at bootup and beyond? Attaching /var/log/messages reg and verbose. This is asus p2l97-ds w/pII-266 and regular 2940. --zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Description: regular messages Content-Disposition: attachment; filename="dmesg.cam" Mar 11 16:25:35 peeper /kernel.cam: ev=0 Mar 11 16:25:36 peeper /kernel.cam: found-> vendor=0x8086, dev=0x7112, revid=0x01 Mar 11 16:25:36 peeper /kernel.cam: class=0c-03-00, hdrtype=0x00, mfdev=0 Mar 11 16:25:36 peeper /kernel.cam: intpin=d, irq=255 Mar 11 16:25:36 peeper /kernel.cam: chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.4.2 Mar 11 16:25:36 peeper /kernel.cam: found-> vendor=0x8086, dev=0x7113, revid=0x01 Mar 11 16:25:36 peeper /kernel.cam: class=06-80-00, hdrtype=0x00, mfdev=0 Mar 11 16:25:36 peeper /kernel.cam: chip4: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3 Mar 11 16:25:36 peeper /kernel.cam: found-> vendor=0x9004, dev=0x8078, revid=0x00 Mar 11 16:25:36 peeper /kernel.cam: class=01-00-00, hdrtype=0x00, mfdev=0 Mar 11 16:25:36 peeper /kernel.cam: intpin=a, irq=9 Mar 11 16:25:36 peeper /kernel.cam: map[0]: type 4, range 32, base 0000d000, size 8 Mar 11 16:25:36 peeper /kernel.cam: map[1]: type 1, range 32, base e3000000, size 12 Mar 11 16:25:36 peeper /kernel.cam: ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 9 on pci0.6.0 Mar 11 16:25:36 peeper /kernel.cam: ahc0: Reading SEEPROM...done. Mar 11 16:25:36 peeper /kernel.cam: ahc0: SE Low byte termination Enabled Mar 11 16:25:36 peeper /kernel.cam: ahc0: SE High byte termination Enabled Mar 11 16:25:36 peeper /kernel.cam: ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Mar 11 16:25:36 peeper /kernel.cam: ahc0: Resetting Channel A Mar 11 16:25:36 peeper /kernel.cam: ahc0: Downloading Sequencer Program... 417 instructions downloaded Mar 11 16:25:36 peeper /kernel.cam: found-> vendor=0x5333, dev=0x88f0, revid=0x00 Mar 11 16:25:36 peeper /kernel.cam: class=03-00-00, hdrtype=0x00, mfdev=0 Mar 11 16:25:36 peeper /kernel.cam: intpin=a, irq=12 Mar 11 16:25:36 peeper /kernel.cam: map[0]: type 1, range 32, base e0000000, size 25 Mar 11 16:25:36 peeper /kernel.cam: vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 12 on pci0.10.0 Mar 11 16:25:36 peeper /kernel.cam: found-> vendor=0x9004, dev=0x8178, revid=0x00 Mar 11 16:25:36 peeper /kernel.cam: class=01-00-00, hdrtype=0x00, mfdev=0 Mar 11 16:25:36 peeper /kernel.cam: intpin=a, irq=11 Mar 11 16:25:36 peeper /kernel.cam: map[0]: type 4, range 32, base 0000b800, size 8 Mar 11 16:25:36 peeper /kernel.cam: map[1]: type 1, range 32, base df800000, size 12 Mar 11 16:25:36 peeper /kernel.cam: ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.11.0 Mar 11 16:25:36 peeper /kernel.cam: ahc1: Reading SEEPROM...done. Mar 11 16:25:36 peeper /kernel.cam: ahc1: internal SE 50 cable is present, internal SE 68 cable not present Mar 11 16:25:36 peeper /kernel.cam: ahc1: external SE cable not present Mar 11 16:25:36 peeper /kernel.cam: ahc1: BIOS eeprom not present Mar 11 16:25:36 peeper /kernel.cam: ahc1: SE Low byte termination Enabled Mar 11 16:25:36 peeper /kernel.cam: ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Mar 11 16:25:36 peeper /kernel.cam: ahc1: Resetting Channel A Mar 11 16:25:36 peeper /kernel.cam: ahc1: Downloading Sequencer Program... 417 instructions downloaded Mar 11 16:25:36 peeper /kernel.cam: Probing for devices on PCI bus 1: Mar 11 16:25:37 peeper /kernel.cam: Initializing PnP override table Mar 11 16:25:37 peeper /kernel.cam: Probing for PnP devices: Mar 11 16:25:37 peeper /kernel.cam: Trying Read_Port at 203 Mar 11 16:25:37 peeper /kernel.cam: Trying Read_Port at 243 Mar 11 16:25:37 peeper /kernel.cam: CSN 1 Vendor ID: CTL0043 [0x43008c0e] Serial 0x00011822 Mar 11 16:25:37 peeper /kernel.cam: Called nullpnp_probe with tag 0x00000001, type 0x43008c0e Mar 11 16:25:37 peeper /kernel.cam: Probing for devices on the ISA bus: Mar 11 16:25:37 peeper /kernel.cam: kbdio: RESET_KBD return code:00fa Mar 11 16:25:37 peeper /kernel.cam: kbdio: RESET_KBD status:00aa Mar 11 16:25:37 peeper /kernel.cam: vt0 at 0x60-0x6f irq 1 on motherboard Mar 11 16:25:37 peeper /kernel.cam: vt0: unkown s3, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24] Mar 11 16:25:37 peeper /kernel.cam: ed0 at 0x300-0x31f irq 15 on isa Mar 11 16:25:37 peeper /kernel.cam: ed0: address 00:40:05:58:53:3a, type NE2000 (16 bit) Mar 11 16:25:37 peeper /kernel.cam: bpf: ed0 attached Mar 11 16:25:37 peeper /kernel.cam: sio0 at 0x3f8-0x3ff irq 4 on isa Mar 11 16:25:37 peeper /kernel.cam: sio0: type 16550A Mar 11 16:25:37 peeper /kernel.cam: sio1 at 0x2f8-0x2ff irq 3 on isa Mar 11 16:25:37 peeper /kernel.cam: sio1: type 16550A Mar 11 16:25:37 peeper /kernel.cam: lpt0 at 0x378-0x37f irq 7 on isa Mar 11 16:25:37 peeper /kernel.cam: lpt0: Interrupt-driven port Mar 11 16:25:37 peeper /kernel.cam: lp0: TCP/IP capable interface Mar 11 16:25:37 peeper /kernel.cam: bpf: lp0 attached Mar 11 16:25:37 peeper /kernel.cam: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Mar 11 16:25:37 peeper /kernel.cam: fdc0: FIFO enabled, 8 bytes threshold Mar 11 16:25:37 peeper /kernel.cam: fd0: 1.44MB 3.5in Mar 11 16:25:37 peeper /kernel.cam: npx0 on motherboard Mar 11 16:25:37 peeper /kernel.cam: npx0: INT 16 interface Mar 11 16:25:37 peeper /kernel.cam: sb0 at 0x220 irq 5 drq 1 on isa Mar 11 16:25:37 peeper /kernel.cam: snd0: <SoundBlaster 16 4.13> Mar 11 16:25:37 peeper /kernel.cam: sbxvi0 at ? drq 5 on isa Mar 11 16:25:37 peeper /kernel.cam: snd0: <SoundBlaster 16 4.13> Mar 11 16:25:37 peeper /kernel.cam: sbmidi0 at 0x330 on isa Mar 11 16:25:37 peeper /kernel.cam: snd0: <SoundBlaster MPU-401> Mar 11 16:25:37 peeper /kernel.cam: awe0 at 0x620 on isa Mar 11 16:25:37 peeper /kernel.cam: AWE32: not detected Mar 11 16:25:37 peeper /kernel.cam: Mar 11 16:25:37 peeper /kernel.cam: opl0 at 0x388 on isa Mar 11 16:25:37 peeper /kernel.cam: snd0: <Yamaha OPL3 FM> Mar 11 16:25:37 peeper /kernel.cam: imasks: bio c0080040, tty c003009a, net c0068000 Mar 11 16:25:37 peeper /kernel.cam: BIOS Geometries: Mar 11 16:25:37 peeper /kernel.cam: 0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors Mar 11 16:25:37 peeper /kernel.cam: 1:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors Mar 11 16:25:37 peeper /kernel.cam: 0 accounted for Mar 11 16:25:37 peeper /kernel.cam: Device configuration finished. Mar 11 16:25:37 peeper /kernel.cam: Linux-ELF exec handler installed Mar 11 16:25:38 peeper /kernel.cam: bpf: tun0 attached Mar 11 16:25:38 peeper /kernel.cam: bpf: lo0 attached Mar 11 16:25:38 peeper /kernel.cam: SCSI bus reset delivered. 0 SCBs aborted. Mar 11 16:25:38 peeper /kernel.cam: SCSI bus reset delivered. 0 SCBs aborted. Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 5 synchronous at 5.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: ahc0: target 4 synchronous at 5.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: ahc0: target 4 using asynchronous transfers Mar 11 16:25:38 peeper /kernel.cam: ahc0: target 4 synchronous at 5.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: ahc0: target 2 synchronous at 10.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: (probe16:ahc1:0:1:0): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x44 Mar 11 16:25:38 peeper /kernel.cam: SEQADDR == 0x10e Mar 11 16:25:38 peeper /kernel.cam: SSTAT1 == 0x2 Mar 11 16:25:38 peeper /kernel.cam: (probe20:ahc1:0:5:0): SCB 0x5 - timed out in datain phase, SCSISIGI == 0x44 Mar 11 16:25:38 peeper /kernel.cam: SEQADDR == 0x10e Mar 11 16:25:38 peeper /kernel.cam: SSTAT1 == 0x2 Mar 11 16:25:38 peeper /kernel.cam: (probe20:ahc1:0:5:0): BDR message in message buffer Mar 11 16:25:38 peeper /kernel.cam: (probe20:ahc1:0:5:0): SCB 0x5 - timed out in datain phase, SCSISIGI == 0x54 Mar 11 16:25:38 peeper /kernel.cam: SEQADDR == 0x10e Mar 11 16:25:38 peeper /kernel.cam: SSTAT1 == 0x2 Mar 11 16:25:38 peeper /kernel.cam: (probe20:ahc1:0:5:0): no longer in timeout Mar 11 16:25:38 peeper /kernel.cam: ahc1: Issued Channel A Bus Reset. 3 SCBs aborted Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 6 synchronous at 10.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 6 using asynchronous transfers Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 6 synchronous at 10.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 1 synchronous at 8.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: sa0 at ahc1 bus 0 target 5 lun 0 Mar 11 16:25:38 peeper /kernel.cam: sa0: <CONNER CTT8000-S 1.17> Removable Sequential Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: sa0: Serial Number Mar 11 16:25:38 peeper /kernel.cam: sa0: 3.300MB/s transfers Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 6 using asynchronous transfers Mar 11 16:25:38 peeper /kernel.cam: pass0 at ahc0 bus 0 target 0 lun 0 Mar 11 16:25:38 peeper /kernel.cam: pass0: <FUJITSU M2954S-512 0155> Fixed Direct Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: pass0: Serial Number 50082685 Mar 11 16:25:38 peeper /kernel.cam: pass0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled Mar 11 16:25:38 peeper /kernel.cam: ahc0: target 4 using asynchronous transfers Mar 11 16:25:38 peeper /kernel.cam: pass1 at ahc0 bus 0 target 2 lun 0 Mar 11 16:25:38 peeper /kernel.cam: pass1: <FUJITSU M1606S-512 6234> Fixed Direct Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: pass1: Serial Number 06056905 Mar 11 16:25:38 peeper /kernel.cam: pass1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Mar 11 16:25:38 peeper /kernel.cam: pass2 at ahc0 bus 0 target 4 lun 0 Mar 11 16:25:38 peeper /kernel.cam: pass2: <PLEXTOR CD-ROM PX-6XCS 1.08> Removable CD-ROM SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: pass2: 3.300MB/s transfers Mar 11 16:25:38 peeper /kernel.cam: pass3 at ahc1 bus 0 target 1 lun 0 Mar 11 16:25:38 peeper /kernel.cam: pass3: <MICROP 4421-07 0502SJ 0502> Fixed Direct Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: pass3: Serial Number 6082781130 Mar 11 16:25:38 peeper /kernel.cam: pass3: 8.64MB/s transfers (8.64MHz, offset 15), Tagged Queueing Enabled Mar 11 16:25:38 peeper /kernel.cam: ahc1: target 6 synchronous at 10.0MHz, offset = 0xf Mar 11 16:25:38 peeper /kernel.cam: pass4 at ahc1 bus 0 target 5 lun 0 Mar 11 16:25:38 peeper /kernel.cam: pass4: <CONNER CTT8000-S 1.17> Removable Sequential Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: pass4: Serial Number Mar 11 16:25:38 peeper /kernel.cam: pass4: 3.300MB/s transfers Mar 11 16:25:38 peeper /kernel.cam: pass5 at ahc1 bus 0 target 6 lun 0 Mar 11 16:25:38 peeper /kernel.cam: pass5: <SyQuest EZ230S 7220> Removable Direct Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: pass5: 10.0MB/s transfers (10.0MHz, offset 15) Mar 11 16:25:38 peeper /kernel.cam: da2 at ahc0 bus 0 target 2 lun 0 Mar 11 16:25:38 peeper /kernel.cam: da2: <FUJITSU M1606S-512 6234> Fixed Direct Access SCSI2 device Mar 11 16:25:38 peeper /kernel.cam: da2: Serial Number 06056905 Mar 11 16:25:38 peeper /kernel.cam: da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Mar 11 16:25:38 peeper /kernel.cam: da2: 1041MB (2131992 512 byte sectors: 64H 32S/T 1041C) Mar 11 16:25:38 peeper /kernel.cam: da0 at ahc0 bus 0 target 0 lun 0 Mar 11 16:25:39 peeper /kernel.cam: da0: <FUJITSU M2954S-512 0155> Fixed Direct Access SCSI2 device Mar 11 16:25:39 peeper /kernel.cam: da0: Serial Number 50082685 Mar 11 16:25:39 peeper /kernel.cam: da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled Mar 11 16:25:39 peeper /kernel.cam: da0: 4149MB (8498506 512 byte sectors: 64H 32S/T 4149C) Mar 11 16:25:39 peeper /kernel.cam: da1 at ahc1 bus 0 target 1 lun 0 Mar 11 16:25:39 peeper /kernel.cam: da1: <MICROP 4421-07 0502SJ 0502> Fixed Direct Access SCSI2 device Mar 11 16:25:39 peeper /kernel.cam: da1: Serial Number 6082781130 Mar 11 16:25:39 peeper /kernel.cam: da1: 8.64MB/s transfers (8.64MHz, offset 15), Tagged Queueing Enabled Mar 11 16:25:39 peeper /kernel.cam: da1: 2047MB (4193360 512 byte sectors: 64H 32S/T 2047C) Mar 11 16:25:39 peeper /kernel.cam: da3 at ahc1 bus 0 target 6 lun 0 Mar 11 16:25:39 peeper /kernel.cam: da3: <SyQuest EZ230S 7220> Removable Direct Access SCSI2 device Mar 11 16:25:39 peeper /kernel.cam: da3: 10.0MB/s transfers (10.0MHz, offset 15) Mar 11 16:25:39 peeper /kernel.cam: da3: 220MB (450560 512 byte sectors: 64H 32S/T 220C) Mar 11 16:25:39 peeper /kernel.cam: Consideringahc0: target 4 synchronous at 5.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: FFS root f/s. Mar 11 16:25:39 peeper /kernel.cam: changing root device to da0s3a Mar 11 16:25:39 peeper /kernel.cam: cd0 at ahc0 bus 0 target 4 lun 0 Mar 11 16:25:39 peeper /kernel.cam: cd0: <PLEXTOR CD-ROM PX-6XCS 1.08> Removable CD-ROM SCSI2 device Mar 11 16:25:39 peeper /kernel.cam: cd0: 5.0MB/s transfers (5.0MHz, offset 15) Mar 11 16:25:39 peeper /kernel.cam: cd0: cd present [320495 x 2048 byte records] Mar 11 16:25:39 peeper /kernel.cam: sd0s1: type 0x6, start 32, end = 511999, size 511968 : OK Mar 11 16:25:39 peeper /kernel.cam: sd0s2: type 0xa5, start 512000, end = 4503551, size 3991552 : OK Mar 11 16:25:39 peeper /kernel.cam: sd0s3: type 0xa5, start 4503552, end = 8497151, size 3993600 : OK Mar 11 16:25:39 peeper /kernel.cam: sd1s1: type 0x6, start 32, end = 511999, size 511968 : OK Mar 11 16:25:39 peeper /kernel.cam: sd1s2: type 0xa5, start 512000, end = 4192255, size 3680256 : OK Mar 11 16:25:39 peeper /kernel.cam: sd2s1: type 0xa5, start 32, end = 2131967, size 2131936 : OK Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 using asynchronous transfers Mar 11 16:25:39 peeper /kernel.cam: ahc0: target 0 synchronous at 20.0MHz, offset = 0xf Mar 11 16:25:39 peeper /kernel.cam: sd2s1: type 0xa5, start 32, end = 2131967, size 2131936 : OK Mar 11 16:25:39 peeper /kernel.cam: pid 39 (dmesg), uid 0: exited on signal 11 Mar 11 16:25:39 peeper /kernel.cam: pid 87 (dset), uid 0: exited on signal 11 Mar 11 16:25:39 peeper /kernel.cam: pid 96 (savecore), uid 0: exited on signal 11 Mar 11 16:25:40 peeper /kernel.cam: Old mount_msdosfs, flags=0 Mar 11 16:25:40 peeper /kernel.cam: Old mount_msdosfs, flags=0 Mar 11 16:25:41 peeper /kernel.cam: pid 129 (kvm_mkdb), uid 0: exited on signal 11 Mar 11 16:25:41 peeper lpd[146]: restarted Mar 11 16:26:35 peeper su: tom to root on /dev/ttyv3 Mar 11 16:27:13 peeper /kernel.cam: pid 320 (dmesg), uid 0: exited on signal 11 --zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Description: verbose messages Content-Disposition: attachment; filename="dmesg3.cam" Mar 11 19:37:43 peeper /kernel.cam: Copyright (c) 1992-1998 FreeBSD Inc. Mar 11 19:37:43 peeper /kernel.cam: Copyright (c) 1982, 1986, 1989, 1991, 1993 Mar 11 19:37:43 peeper /kernel.cam: The Regents of the University of California. All rights reserved. Mar 11 19:37:44 peeper /kernel.cam: FreeBSD 3.0-CURRENT #3: Wed Mar 11 16:23:11 CST 1998 Mar 11 19:37:44 peeper /kernel.cam: tom@peeper.TOJ.org:/usr/src/sys/compile/CAM Mar 11 19:37:44 peeper /kernel.cam: Timecounter "i8254" frequency 1193182 Hz cost 3119 ns Mar 11 19:37:44 peeper /kernel.cam: Timecounter "TSC" frequency 267359375 Hz cost 216 ns Mar 11 19:37:44 peeper /kernel.cam: CPU: Pentium Pro (267.36-MHz 686-class CPU) Mar 11 19:37:44 peeper /kernel.cam: Origin = "GenuineIntel" Id = 0x633 Stepping=3 Mar 11 19:37:44 peeper /kernel.cam: Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX> Mar 11 19:37:44 peeper /kernel.cam: real memory = 134217728 (131072K bytes) Mar 11 19:37:44 peeper /kernel.cam: avail memory = 128196608 (125192K bytes) Mar 11 19:37:44 peeper /kernel.cam: Probing for devices on PCI bus 0: Mar 11 19:37:44 peeper /kernel.cam: chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0 Mar 11 19:37:44 peeper /kernel.cam: chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0 Mar 11 19:37:44 peeper /kernel.cam: chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.4.0 Mar 11 19:37:44 peeper /kernel.cam: chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.4.2 Mar 11 19:37:44 peeper /kernel.cam: chip4: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3 Mar 11 19:37:44 peeper /kernel.cam: ahc0: <Adaptec aic7880 Ultra SCSI adapter> rev 0x00 int a irq 9 on pci0.6.0 Mar 11 19:37:44 peeper /kernel.cam: ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Mar 11 19:37:44 peeper /kernel.cam: vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 12 on pci0.10.0 Mar 11 19:37:44 peeper /kernel.cam: ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.11.0 Mar 11 19:37:44 peeper /kernel.cam: ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Mar 11 19:37:44 peeper /kernel.cam: Probing for devices on PCI bus 1: Mar 11 19:37:44 peeper /kernel.cam: Probing for PnP devices: Mar 11 19:37:44 peeper /kernel.cam: CSN 1 Vendor ID: CTL0043 [0x43008c0e] Serial 0x00011822 Mar 11 19:37:44 peeper /kernel.cam: Probing for devices on the ISA bus: Mar 11 19:37:44 peeper /kernel.cam: vt0 at 0x60-0x6f irq 1 on motherboard Mar 11 19:37:44 peeper /kernel.cam: vt0: unkown s3, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24] Mar 11 19:37:44 peeper /kernel.cam: ed0 at 0x300-0x31f irq 15 on isa Mar 11 19:37:44 peeper /kernel.cam: ed0: address 00:40:05:58:53:3a, type NE2000 (16 bit) Mar 11 19:37:44 peeper /kernel.cam: sio0 at 0x3f8-0x3ff irq 4 on isa Mar 11 19:37:44 peeper /kernel.cam: sio0: type 16550A Mar 11 19:37:44 peeper /kernel.cam: sio1 at 0x2f8-0x2ff irq 3 on isa Mar 11 19:37:44 peeper /kernel.cam: sio1: type 16550A Mar 11 19:37:44 peeper /kernel.cam: lpt0 at 0x378-0x37f irq 7 on isa Mar 11 19:37:44 peeper /kernel.cam: lpt0: Interrupt-driven port Mar 11 19:37:44 peeper /kernel.cam: lp0: TCP/IP capable interface Mar 11 19:37:44 peeper /kernel.cam: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Mar 11 19:37:44 peeper /kernel.cam: fdc0: FIFO enabled, 8 bytes threshold Mar 11 19:37:44 peeper /kernel.cam: fd0: 1.44MB 3.5in Mar 11 19:37:44 peeper /kernel.cam: npx0 on motherboard Mar 11 19:37:44 peeper /kernel.cam: npx0: INT 16 interface Mar 11 19:37:44 peeper /kernel.cam: sb0 at 0x220 irq 5 drq 1 on isa Mar 11 19:37:44 peeper /kernel.cam: snd0: <SoundBlaster 16 4.13> Mar 11 19:37:44 peeper /kernel.cam: sbxvi0 at ? drq 5 on isa Mar 11 19:37:44 peeper /kernel.cam: snd0: <SoundBlaster 16 4.13> Mar 11 19:37:44 peeper /kernel.cam: sbmidi0 at 0x330 on isa Mar 11 19:37:44 peeper /kernel.cam: snd0: <SoundBlaster MPU-401> Mar 11 19:37:44 peeper /kernel.cam: awe0 at 0x620 on isa Mar 11 19:37:44 peeper /kernel.cam: AWE32: not detected Mar 11 19:37:44 peeper /kernel.cam: Mar 11 19:37:44 peeper /kernel.cam: opl0 at 0x388 on isa Mar 11 19:37:44 peeper /kernel.cam: snd0: <Yamaha OPL3 FM> Mar 11 19:37:44 peeper /kernel.cam: (probe16:ahc1:0:1:0): SCB 0x1 - timed out in datain phase, SCSISIGI == 0x44 Mar 11 19:37:44 peeper /kernel.cam: SEQADDR == 0x10d Mar 11 19:37:44 peeper /kernel.cam: SSTAT1 == 0x2 Mar 11 19:37:44 peeper /kernel.cam: (probe20:ahc1:0:5:0): SCB 0x5 - timed out in datain phase, SCSISIGI == 0x44 Mar 11 19:37:44 peeper /kernel.cam: SEQADDR == 0x10d Mar 11 19:37:44 peeper /kernel.cam: SSTAT1 == 0x2 Mar 11 19:37:44 peeper /kernel.cam: (probe20:ahc1:0:5:0): BDR message in message buffer Mar 11 19:37:45 peeper /kernel.cam: (probe20:ahc1:0:5:0): SCB 0x5 - timed out in datain phase, SCSISIGI == 0x54 Mar 11 19:37:45 peeper /kernel.cam: SEQADDR == 0x10d Mar 11 19:37:45 peeper /kernel.cam: SSTAT1 == 0x2 Mar 11 19:37:45 peeper /kernel.cam: (probe20:ahc1:0:5:0): no longer in timeout Mar 11 19:37:45 peeper /kernel.cam: ahc1: Issued Channel A Bus Reset. 3 SCBs aborted Mar 11 19:37:45 peeper /kernel.cam: sa0 at ahc1 bus 0 target 5 lun 0 Mar 11 19:37:45 peeper /kernel.cam: sa0: <CONNER CTT8000-S 1.17> Removable Sequential Access SCSI2 device Mar 11 19:37:45 peeper /kernel.cam: sa0: Serial Number Mar 11 19:37:45 peeper /kernel.cam: sa0: 3.300MB/s transfers Mar 11 19:37:45 peeper /kernel.cam: da2 at ahc0 bus 0 target 2 lun 0 Mar 11 19:37:45 peeper /kernel.cam: da2: <FUJITSU M1606S-512 6234> Fixed Direct Access SCSI2 device Mar 11 19:37:45 peeper /kernel.cam: da2: Serial Number 06056905 Mar 11 19:37:45 peeper /kernel.cam: da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled Mar 11 19:37:45 peeper /kernel.cam: da2: 1041MB (2131992 512 byte sectors: 64H 32S/T 1041C) Mar 11 19:37:45 peeper /kernel.cam: da0 at ahc0 bus 0 target 0 lun 0 Mar 11 19:37:45 peeper /kernel.cam: da0: <FUJITSU M2954S-512 0155> Fixed Direct Access SCSI2 device Mar 11 19:37:45 peeper /kernel.cam: da0: Serial Number 50082685 Mar 11 19:37:45 peeper /kernel.cam: da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled Mar 11 19:37:45 peeper /kernel.cam: da0: 4149MB (8498506 512 byte sectors: 64H 32S/T 4149C) Mar 11 19:37:45 peeper /kernel.cam: changing root device to da0s3a Mar 11 19:37:45 peeper /kernel.cam: da1 at ahc1 bus 0 target 1 lun 0 Mar 11 19:37:45 peeper /kernel.cam: da1: <MICROP 4421-07 0502SJ 0502> Fixed Direct Access SCSI2 device Mar 11 19:37:45 peeper /kernel.cam: da1: Serial Number 6082781130 Mar 11 19:37:45 peeper /kernel.cam: da1: 8.64MB/s transfers (8.64MHz, offset 15), Tagged Queueing Enabled Mar 11 19:37:45 peeper /kernel.cam: da1: 2047MB (4193360 512 byte sectors: 64H 32S/T 2047C) Mar 11 19:37:45 peeper /kernel.cam: da3 at ahc1 bus 0 target 6 lun 0 Mar 11 19:37:45 peeper /kernel.cam: da3: <SyQuest EZ230S 7220> Removable Direct Access SCSI2 device Mar 11 19:37:45 peeper /kernel.cam: da3: 10.0MB/s transfers (10.0MHz, offset 15) Mar 11 19:37:45 peeper /kernel.cam: da3: 220MB (450560 512 byte sectors: 64H 32S/T 220C) Mar 11 19:37:45 peeper /kernel.cam: cd0 at ahc0 bus 0 target 4 lun 0 Mar 11 19:37:45 peeper /kernel.cam: cd0: <PLEXTOR CD-ROM PX-6XCS 1.08> Removable CD-ROM SCSI2 device Mar 11 19:37:45 peeper /kernel.cam: cd0: 5.0MB/s transfers (5.0MHz, offset 15) Mar 11 19:37:45 peeper /kernel.cam: cd0: cd present [320495 x 2048 byte records] Mar 11 19:37:45 peeper /kernel.cam: pid 39 (dmesg), uid 0: exited on signal 11 Mar 11 19:37:45 peeper /kernel.cam: pid 87 (dset), uid 0: exited on signal 11 Mar 11 19:37:45 peeper /kernel.cam: pid 96 (savecore), uid 0: exited on signal 11 Mar 11 19:37:45 peeper /kernel.cam: Old mount_msdosfs, flags=0 Mar 11 19:37:45 peeper /kernel.cam: Old mount_msdosfs, flags=0 Mar 11 19:37:46 peeper /kernel.cam: pid 129 (kvm_mkdb), uid 0: exited on signal 11 Mar 11 19:37:47 peeper lpd[146]: restarted Mar 11 19:38:56 peeper su: tom to root on /dev/ttyv3 Mar 11 19:39:19 peeper /kernel.cam: pid 310 (dmesg), uid 0: exited on signal 11 --zhXaljGHf11kAtnf-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980311210038.28154>