Date: Sat, 10 Feb 2001 18:36:48 -0700 (MST) From: <janb@cs.utep.edu> To: Eric Jacoboni <jaco@teaser.fr> Cc: <stable@FreeBSD.ORG> Subject: Re: ata driver and HighPoint HPT370 ATA100 controller Message-ID: <Pine.GSO.4.30.0102101836220.16559-100000@gecko> In-Reply-To: <86vgqigi6j.fsf@titine.fr.eu.org>
next in thread | previous in thread | raw e-mail | index | archive | help
As far as I know, you have to set a jumper on the plextor drive to enable the UDMA mode. JAn On 11 Feb 2001, Eric Jacoboni wrote: > Hi, > > I've got my new machine with a Abit KT7A-RAID motherboard. All runs ok > except something i dont understand with the ata driver. > > My box is all IDE : IBM DTLA hard drive as primary master, CDROM as > secondary master and CD-RW Plextor 12/10/32A as primary master on the > second IDE controller (HighPoint HPT370 ATA100). > > At boot, i get the following messages : > > ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master tagged UDMA66 > acd0: CDROM <ATAPI 50X CDROM> at ata1-master using UDMA33 > acd1: CD-RW <PLEXTOR CD-R PX-W1210A> at ata2-master using PIO4 > > Why the Plextor is not recognized as UDMA ? > > I've try to change that with sysctl -w hw.atamodes but... no way. > > My kernel config file contains the following related lines : > > device ata > device atadisk > device atapicd > > options ATA_STATIC_ID > options ATA_STATIC_ID > options ATA_ENABLE_ATAPI_DMA > options ATA_ENABLE_TAGS > > Furthermore, i ask this question because i wonder if my problems with > burning audio CDs that are inaudible is not related : i've read in the > -questions archives that someone has solved the same burning pb when > its CD-RW was recognized as WDMA2 instead of PIO4 > > I've put the CD-RW on the second controller because i wanted it was > alone on its port (and, then, master)... Maybe i'm wrong ? > > Thanks for you help, i'm really getting fed up with rebooting Win= dows > only to burn Audio CD... > -- > =C9ric Jacoboni, n=E9 il y a 1285212400 secondes. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.30.0102101836220.16559-100000>