Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 14 Nov 2000 20:39:06 -0600
From:      "Josh Paetzel" <jpaetzel@hutchtel.net>
To:        <sobotka@axess.com>, <freebsd-questions@FreeBSD.ORG>
Subject:   Re: Problem with large drives?
Message-ID:  <01b401c04ead$39e82dc0$0200000a@vladsempire.net>
References:  <3A0FAFE6.7FE7@axess.com>

next in thread | previous in thread | raw e-mail | index | archive | help

----- Original Message -----
From: "Henry Sobotka" <sobotka@axess.com>
To: <freebsd-questions@FreeBSD.ORG>
Sent: Monday, November 13, 2000 3:09 AM
Subject: Problem with large drives?


> I'm trying to install from Power Pak v4 (April 2000) onto a recently
> purchased 20.5-GB drive (WD205BARTL). The boot promptly gets lost and
> defaults to fd0.  The CD-ROM drive is a standard IDE ATAPI. If I feed
> the process the floppies it wants, I get as far as the "probing: this
> may take a while..." screen before the system locks after what sounds
> like a drive check. A search of your lists/archives for "20.5 GB" and
> "large drive" turned up a number of messages that are "inaccessible";
> didn't notice anything about this in the FAQ either.
>
> The BIOS on this machine has been updated for > 8.4 GB support and I
> already have several other operating systems up and running. Also,
> before buying the Power Pak, a test boot with downloaded FreeBSD files
> worked fine (i.e. got to the installation selection menu). But that was
> before I installed the new drive, which is why it's my prime suspect as
> opposed to any other hardware.
>
> Suggestions?
>
> TIA,
>
> Henry
>

You are not having a compatability issue with that drive and FreeBSD.  I am
using that exact drive on one of my boxes as we speak.  Perhaps you have a
bad boot image on one of your floppies....I have run into that in the past.

Josh

>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01b401c04ead$39e82dc0$0200000a>