Date: Tue, 27 Jul 2010 03:13:08 GMT From: Neko Chang <epopen@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/148979: [iwn][panic] Intel 5100agn cause panic on 8.1-STABLE amd64 in TOSHIBA M800 laptop Message-ID: <201007270313.o6R3D8j0013502@www.freebsd.org> Resent-Message-ID: <201007270320.o6R3K55k034278@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 148979 >Category: kern >Synopsis: [iwn][panic] Intel 5100agn cause panic on 8.1-STABLE amd64 in TOSHIBA M800 laptop >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jul 27 03:20:05 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Neko Chang >Release: 8.1-STABLE amd64 >Organization: Taiwan >Environment: Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-STABLE #0: Sun Jul 25 14:37:44 CST 2010 root@epopen.com:/usr/obj/usr/src/sys/EpopenKernel amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3934015488 (3751 MB) ACPI APIC Table: <INTEL CRESTLNE> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Cuse4BSD v0.1.11 @ /dev/cuse ichwd module loaded acpi0: <TOSQCI TOSQCI00> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 acpi_video0: <ACPI video extension> on vgapci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: detected 131068k stolen memory agp0: aperture size is 256M drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 19 at device 26.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801I (ICH9) USB controller> on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04800-0xf4a04bff irq 19 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf4800000-0xf4803fff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20100226_0142 hdac0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci7: <ACPI PCI bus> on pcib2 mskc0: <Marvell Yukon 88E8040T Fast Ethernet> irq 16 at device 0.0 on pci7 msk0: <Marvell Technology Group Ltd. Yukon FE+ Id 0xb8 Rev 0x00> on mskc0 msk0: disabling jumbo frame support msk0: Ethernet address: 00:1e:68:a9:7d:b7 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E3016 10/100 Fast Ethernet PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto mskc0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci8: <ACPI PCI bus> on pcib3 pci8: <network> at device 0.0 (no driver attached) uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] usbus6: <Intel 82801I (ICH9) USB controller> on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib4 fwohci0: <1394 Open Host Controller Interface> mem 0xff501000-0xff501fff,0xf4700000-0xf47007ff at device 1.0 on pci10 fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:1b:24:00:01:1e:77:92 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:1b:24:1e:77:92 fwe0: Ethernet address: 02:1b:24:1e:77:92 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:1b:24:00:01:1e:77:92 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sdhci0: <Generic SD HCI> mem 0xf4700800-0xf47008ff at device 1.2 on pci10 sdhci0: 1 slot(s) allocated sdhci0: [ITHREAD] mmc0: <MMC/SD bus> on sdhci0 pci10: <mass storage> at device 1.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 4> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 5> on atapci0 ata5: [ITHREAD] ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1c00-0x1c1f irq 19 at device 31.3 on pci0 ichsmb0: [ITHREAD] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 ichwd0: <Intel ICH9M watchdog timer> on isa0 ichwd0: Intel ICH9M watchdog timer (ICH9 or equivalent) orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xdf000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0xe5 offMax=0x327 firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ad4: 238475MB <TOSHIBA MK2552GSX LV010M> at ata2-master UDMA100 SATA 1.5Gb/s ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 acd0: DVDR <MATSHITADVD-RAM UJ862AS/1.50> at ata3-master UDMA33 SATA 1.5Gb/s hdac0: HDA Codec #0: Conexant CX20561 (Hermosa) hdac0: HDA Codec #1: Intel G45 HDMI pcm0: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 0 nid 1 on hdac0 pcm2: <HDA Conexant CX20561 (Hermosa) PCM #2 Digital> at cad 0 nid 1 on hdac0 pcm3: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 1 nid 1 on hdac0 GEOM: ad4: partition 3 does not start on a track boundary. GEOM: ad4: partition 3 does not end on a track boundary. GEOM: ad4: partition 2 does not start on a track boundary. GEOM: ad4: partition 2 does not end on a track boundary. GEOM: ad4: partition 1 does not start on a track boundary. GEOM: ad4: partition 1 does not end on a track boundary. mmcsd0: 241MB <SD Memory Card> at mmc0 25MHz/4bit GEOM: mmcsd0: partition 1 does not start on a track boundary. GEOM: mmcsd0: partition 1 does not end on a track boundary. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ugen3.2: <Generic> at usbus3 umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on usbus3 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe7:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe7:ata3:0:0:0): CAM status: SCSI Status Error (probe7:ata3:0:0:0): SCSI status: Check Condition (probe7:ata3:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) ugen7.2: <Chicony Electronics Co., Ltd.> at usbus7 (probe7:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe7:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe7:umass-sim0:0:0:0): SCSI status: Check Condition (probe7:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed) pass0 at ata3 bus 0 scbus2 target 0 lun 0 pass0: <MATSHITA DVD-RAM UJ862AS 1.50> Removable CD-ROM SCSI-0 device da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <JetFlash TS1GJF150 8.07> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 980MB (2007040 512 byte sectors: 64H 32S/T 980C) pass0: 33.000MB/s transfers SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s3a ugen4.2: <vendor 0x08ff> at usbus4 Setting hostuuid: e0f6c98b-29c6-dc11-b6c2-001e68a97db7. Setting hostid: 0x3f30f98c. Entropy harvesting: interrupts ethernet point_to_point kickstart >Description: >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201007270313.o6R3D8j0013502>