Date: Fri, 9 Jan 2009 22:23:24 -0200 (BRST) From: "Nenhum_de_Nos" <matheus@eternamente.info> To: stable@freebsd.org Subject: mini itx from via - acpi issues on 7.1R Message-ID: <b57c7e45691db88edf99d3ca84cbf9d3.squirrel@lamneth>
next in thread | raw e-mail | index | archive | help
hail,
I'm running 7.1R (tried 8.0-CURRENT also) on a via mini itx (dmesg bellow)
and if I load acpi module, I have no lan. it appears, I can set IP, even
the led would blink when I ping. but no signal of bits on the other pc
whatsoever. tcpdump sees nothing in both endpoints. if acpi is not loaded,
vr0 works as it should.
i really think acpi would help this box, on power purposes, so here I am
asking.
thanks,
matheus
ps: should I mail acpi@ with, or instead ?
$ dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Transmeta(tm) Crusoe(tm) Processor TM5700 (798.13-MHz 586-class CPU)
Origin = "GenuineTMx86" Id = 0x543 Stepping = 3
Features=0x84893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP,CMOV,PN,MMX>
real memory = 117374976 (111 MB)
avail memory = 100737024 (96 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
pci0: <PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 15 at device 9.0
on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe100-0xe11f irq 5 at device 9.1
on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8131000-0xe81310ff irq 10 at
device 9.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
vgapci0: <VGA-compatible display> port 0xe200-0xe2ff mem
0xe0000000-0xe7ffffff,0xe8120000-0xe812ffff irq 11 at device 13.0 on pci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8231 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe300-0xe30f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <bridge> at device 17.4 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe600-0xe6ff mem
0xe8130000-0xe81300ff irq 15 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x51
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:85:e3:2a:17
vr0: [ITHREAD]
cpu0 on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcc000-0xd5fff pnpid
ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
Timecounter "TSC" frequency 798129274 Hz quality 800
Timecounters tick every 1.000 msec
ad0: DMA limited to UDMA33, device found non-ATA66 cable
ad0: 19464MB <SAMSUNG SV2044D MM200-53> at ata0-master UDMA33
Trying to mount root from ufs:/dev/ad0s2a
vr0@pci0:0:18:0: class=0x020000 card=0x01021106 chip=0x30651106 rev=0x51
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller||Used by
GERICOM in laptop Webengine Advanced'
class = network
subclass = ethernet
--
We will call you cygnus,
The God of balance you shall be
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b57c7e45691db88edf99d3ca84cbf9d3.squirrel>