Date: Thu, 10 Jan 2008 09:17:44 +0000 From: "Darran" <darranc@deejc.net> To: "Scot Hetzel" <swhetzel@gmail.com>, <freebsd-current@freebsd.org> Subject: Re: Hung laptop now will not boot 7.0-RC1 Message-ID: <juf8hk.ckstgq@webmail.deejc.net> In-Reply-To: <790a9fff0801092316s44f07257ne6ac48a8c9a09f97@mail.gmail.com> References: <319b588b0801060139m5e99e857of3a8f44ab3d2e078@mail.gmail.com> <003401c85059$581790f0$6501a8c0@Vostro> <790a9fff0801092316s44f07257ne6ac48a8c9a09f97@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
"Scot Hetzel" <swhetzel@gmail.com> wrote: > On 1/6/08, Darran <darranc@deejc.net> wrote: > > Hello all, > > > > I downloaded, burnt and installed 7.0-RC1 (all torrent) on amd64 > > I downloaded the dell windows drivers for my laptop wireless card (which > > worked on i3686 6.2-RELEASE) and used ndisgen to create the .ko file > > (bcmwl5_sys.ko) and loaded it and then realised I had created the 32 bit > > driver so I re-did it and used the 64 bit file and loaded the 64bit .ko and > > at that point my laptop (Dell Vostro 1000) hung. > > I had put bcmwl5_sys_load="YES" in the loader.conf file > > I rebooted and now I don't get anything. As soon as it starts to boot it > > stops. > > There is a screen showing kernel dump info and I can copy it if needed but I > > have to burn the rescue iso otherwise I cant boot. > > > > Is this a known problem ? > > Does anyone have any advice ? > > > Which driver did you down load from Dell? > > I tried Dell's R151519.EXE XP Driver > (http://ftp.us.dell.com/network/R151519.EXE) > > Created bcmwl564_sys.ko module from this windows driver, disabled the > HP bcmwl564_sys.ko driver from loading. Rebooted the system, and when > I load the Dell bcmwl564)sys.ko driver the following panic occurs: > > hp010# kgdb -n 11 kernel.debug > > [GDB will not be able to debug user-mode threads: > /usr/lib/libthread_db.so: Undefined symbol "ps_pglobal_lookup"] > GNU gdb 6.1.1 [FreeBSD] > Copyright 2004 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you are > welcome to change it and/or distribute copies of it under certain conditions. > Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for details. > This GDB was configured as "amd64-marcel-freebsd". > Ready to go. Enter 'tr' to connect to the remote target > with /dev/cuad0, 'tr /dev/cuad1' to connect to a different port > or 'trf portno' to connect to the remote target with the firewire > interface. portno defaults to 5556. > > Type 'getsyms' after connection to load kld symbols. > > If you're debugging a local system, you can use 'kldsyms' instead > to load the kld symbols. That's a less obnoxious interface. > During symbol reading...location expression too complex... > During symbol reading, unsupported tag: 'DW_TAG_const_type'. > > Unread portion of the kernel message buffer: > ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem > 0xc0204000-0xc0205fff irq 21 at device 2.0 on pci6 > ndis0: [ITHREAD] > ndis0: NDIS API version: 5.1 > fpudna in kernel mode! > Kernel page fault with the following non-sleepable locks held: > exclusive sleep mutex HAL preemption lock (HAL lock) r = 0 > (0xffffffffd64bff20) locked @ > /usr/src/8x/sys-orig/modules/ndis/../../compat/ndis/subr_hal.c:423 > KDB: stack backtrace: > db_trace_self_wrapper() at db_trace_self_wrapper+0x2a > witness_warn() at witness_warn+0x248 > trap() at trap+0x25e > calltrap() at calltrap+0x8 > --- trap 0xc, rip = 0xffffffffd64b4d29, rsp = 0xffffffffd3d86af0, rbp > = 0xffffffffd3d86b30 --- > KeInsertQueueDpc() at KeInsertQueueDpc+0x69 > ntoskrnl_timercall() at ntoskrnl_timercall+0xb3 > softclock() at softclock+0x2af > ithread_loop() at ithread_loop+0xda > fork_exit() at fork_exit+0x12a > fork_trampoline() at fork_trampoline+0xe > --- trap 0, rip = 0, rsp = 0xffffffffd3d86d30, rbp = 0 --- > > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0x0 > fault code = supervisor read data, page not present > instruction pointer = 0x8:0xffffffffd64b4d29 > stack pointer = 0x10:0xffffffffd3d86af0 > frame pointer = 0x10:0xffffffffd3d86b30 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, long 1, def32 0, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 12 (swi4: clock sio) > panic: from debugger > cpuid = 0 > Uptime: 1m36s > Physical memory: 2035 MB > Dumping 161 MB: 146 130 114 98 82 66 50 34 18 2 > > #0 doadump () at pcpu.h:194 > 194 __asm __volatile("movq %%gs:0,%0" : "=r" (td)); > (kgdb) kldsyms > asf: no kernel modules loaded > (kgdb) list *0xffffffffd64b4d29 > No source file for address 0xffffffffd64b4d29. > (kgdb) bt > #0 doadump () at pcpu.h:194 > During symbol reading, Incomplete CFI data; unspecified registers at > 0xffffffff802c7e7c. > #1 0xffffffff802c83b3 in boot (howto=0x104) at > ../../../kern/kern_shutdown.c:417 > #2 0xffffffff802c8837 in panic (fmt=Variable "fmt" is not available. > ) at ../../../kern/kern_shutdown.c:571 > #3 0xffffffff80196127 in db_panic (addr=Variable "addr" is not available. > ) at ../../../ddb/db_command.c:444 > #4 0xffffffff80196a1f in db_command (last_cmdp=0xffffffff806dbd78, > cmd_table=0x0, dopager=0x1) > at ../../../ddb/db_command.c:411 > #5 0xffffffff80196c30 in db_command_loop () at ../../../ddb/db_command.c:464 > #6 0xffffffff80198569 in db_trap (type=Variable "type" is not available. > ) at ../../../ddb/db_main.c:228 > #7 0xffffffff802f1ab5 in kdb_trap (type=0xc, code=0x0, > tf=0xffffffffd3d86a40) at ../../../kern/subr_kdb.c:510 > #8 0xffffffff804c26bd in trap_fatal (frame=0xffffffffd3d86a40, > eva=Variable "eva" is not available. > ) at ../../../amd64/amd64/trap.c:718 > #9 0xffffffff804c3336 in trap (frame=0xffffffffd3d86a40) at > ../../../amd64/amd64/trap.c:250 > #10 0xffffffff804a89ae in calltrap () at ../../../amd64/amd64/exception.S:177 > #11 0xffffffffd64b4d29 in ?? () > #12 0xffffffffd3d86b30 in ?? () > #13 0xffffffff839e9828 in ?? () > #14 0x00000000000173e7 in ?? () > #15 0x0000000000000000 in ?? () > #16 0x0000000000000016 in ?? () > #17 0x0000000000000008 in ?? () > #18 0xffffffffd3d86b60 in ?? () > #19 0xffffffffd64b6ad3 in ?? () > #20 0xffffffffd3d86b60 in ?? () > #21 0x0000000000000246 in ?? () > #22 0x0000000000000010 in ?? () > #23 0xffffffffc0e40310 in ?? () > #24 0xffffffffd3d86bc0 in ?? () > #25 0xffffffff802da07f in softclock (dummy=Variable "dummy" is not available. > ) at ../../../kern/kern_timeout.c:279 > Previous frame inner to this frame (corrupt stack?) > (kgdb) quit > > FreeBSD hp010 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Wed Jan 9 23:47:38 > CST 2008 swhetzel@hp010:/usr/src/8x/sys/amd64/compile/DV8135NR > amd64 > hp010# > > Is this the error that you are getting? > > > Scot > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > Hi Scott, This is almost exactly the same as i am getting, I will follow your instructions later about the debug but i did use the same driver and it panics with the same sort of message. i think mine might be a dell 1390 card i cant be certain but its almost the same error Darran http://www.deejc.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?juf8hk.ckstgq>