Date: Sat, 01 Jan 2005 22:53:03 +0100 From: gustaaf wijnands <gwg.wijnands.freebsd@xs4all.nl> To: Questions FreeBSD <freebsd-questions@freebsd.org> Subject: Re: External USB Harddrive Message-ID: <41D71BBF.70307@xs4all.nl> In-Reply-To: <1104608800.634.5.camel@owl2> References: <1104608800.634.5.camel@owl2>
next in thread | previous in thread | raw e-mail | index | archive | help
Sergei Gnezdov wrote: > Hi, > > I am using Asus A7N8X Rev 1.06 motherboard on FreeBSD 5.3 release. I > want to use my USB hard drive. It would be the first USB device I use. > What is the procedure? > > Here is what seems to be a related dmesg output: > > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > > usb1: OHCI version 1.0, legacy support > usb1: <OHCI (generic) USB controller> on ohci1 > usb1: USB revision 1.0 > > umass0: Western Digital USB Hard Drive, rev 2.00/11.05, addr 3 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <WDC WD12 00BB-00DAA3 75.1> Fixed Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C) > > I think the drive is probably NTFS formatted. If it is not NTFS it is > FAT32. > > I don't remember the drive specs, but it can do better than USB 1.0. > Well, can't you mount it? if it is fat 32 mount_msdosfs /dev/da0s1 /mnt/ if it is ntfs mount_ntfs /dev/da0s1 /mnt/ good luck! -- Gustaaf Wijnands
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41D71BBF.70307>