Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 May 1999 14:47:29 -0400 (EDT)
From:      Chuck Robey <chuckr@picnic.mat.net>
To:        Darryl Okahata <darrylo@sr.hp.com>
Cc:        freebsd-scsi@FreeBSD.ORG
Subject:   Re: IBM scsi drives 
Message-ID:  <Pine.BSF.4.10.9905131446510.401-100000@picnic.mat.net>
In-Reply-To: <199905131821.LAA06990@mina.sr.hp.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 13 May 1999, Darryl Okahata wrote:

> Chuck Robey <chuckr@picnic.mat.net> wrote:
> 
> > Anyone got experience with an IBM scsi drive, DDRS34560W-LVD?  Their web
> > page says the LVD stands for low voltage differential, and I've got bad
> > memories of dealing with Quantum differentials ... the IBM data says
> > it's fully compatible, on my existing bus, with single-ended scsi (at a
> > lower transfer rate, only 40MB), but I'm wondering.
> 
>      It works.  I'm currently using both an IBM 34560 LVD (4.5GB) and an 
> IBM 39130 LVD (9GB) in SE mode (I ordered "wide SCSI drives" and my
> vendor shipped me LVD ones ;-).  They're very nice, and are attached to
> a Gigabyte 6BXDS (Adaptec 7895) motherboard.  I also have another plain
> F/W (not LVD) IBM 39130 on the same SE bus, and I'm using vinum to
> stripe the LVD and plain F/W 93130 drives.  They work well.
> 
>      The only thing to note about LVD drives is that they have *NO*
> provision for on-drive termination.  All termination must be provided
> elsewhere.

Thanks Darryl, that's exactly what I wanted to hear!  It's already
ordered.

----------------------------+-----------------------------------------------
Chuck Robey                 | Interests include any kind of voice or data 
chuckr@picnic.mat.net       | communications topic, C programming, and Unix.
213 Lakeside Drive Apt T-1  |
Greenbelt, MD 20770         | I run picnic (FreeBSD-current)
(301) 220-2114              | and jaunt (Solaris7).
----------------------------+-----------------------------------------------






To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9905131446510.401-100000>