Date: Mon, 24 May 1999 15:06:39 -0700 From: Eric Kozowski <eric@haydenisland.verio.net> To: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org>, freebsd-mobile@FreeBSD.ORG Subject: Re: apm on quantex h-1331 w/ pao 2.2.8 Message-ID: <19990524150639.A11504@haydenisland.verio.net> In-Reply-To: <19990524100209.G9012@haydenisland.verio.net>; from Eric Kozowski on Mon, May 24, 1999 at 10:02:09AM -0700 References: <19990521213639.F26364@haydenisland.verio.net> <199905220510.OAA21116@tasogare.imasy.or.jp> <19990524100209.G9012@haydenisland.verio.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, May 24, 1999 at 10:02:09AM -0700, Eric Kozowski wrote:
> On Sat, May 22, 1999 at 02:09:22PM +0900, Mitsuru IWASAKI wrote:
> >
> > eric> On Sat, May 22, 1999 at 01:26:24PM +0900, Mitsuru IWASAKI wrote:
> > eric> >
> > eric> > Hmmm, I'd like to see debug messages on apmattach(), something like
> > eric>
> > eric> what's the best way to do this?
> >
> > just add
> > options APM_DEBUG
> > in your kernel configuration file.
>
> i'm going to install pao-19990405 in just a bit.
>
ok, i installed pao-19990405 and i'm still seeing the same problem. zzz works,
but anything else apm related crashes my machine.
FreeBSD 2.2.8-RELEASE #0: Mon May 24 14:54:01 PDT 1999
root@sloop.svjava.com:/usr/src/sys/compile/SLOOP
CPU: Pentium II (quarter-micron) (265.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping=0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,<b16>,<b17>,MMX,<b24>>
real memory = 100663296 (98304K bytes)
avail memory = 95973376 (93724K bytes)
PAO version: PAO-19990405
Initializing PC-card drivers: ed wlp sio wdc
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7192 subclass=0)> rev 2 class 60000 on pci0:0:0
vga0 <VGA-compatible display device> rev 1 class 30000 int a irq ?? on pci0:2:0
pcic0 <TI PCI-1131 PCI-CardBus Bridge> rev 1 class 60700 int a irq ?? on pci0:4:0
TI113X PCI Config Reg: [speaker enable][CSC serial isa irq][FUNC pci int]
pcic1 <TI PCI-1131 PCI-CardBus Bridge> rev 1 class 60700 int b irq ?? on pci0:4:1
TI113X PCI Config Reg: [speaker enable][CSC serial isa irq][FUNC pci int]
chip1 <Intel 82371AB PCI-ISA bridge> rev 2 class 68000 on pci0:7:0
chip2 <Intel 82371AB IDE interface> rev 1 class 10180 on pci0:7:1
chip3 <Intel 82371AB USB interface> rev 1 class c0300 int d irq 10 on pci0:7:2
chip4 <Intel 82371AB Power management controller> rev 2 class 68000 on pci0:7:3
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
Add hook "system keyboard"
ed0 not found at 0x320
pcm0 at 0x220 irq 5 drq 1 on isa
Add hook "pcm resume handler"
Add hook "pcm suspend handler"
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: configured irq 7 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
psm0 at 0x60-0x64 irq 12 on motherboard
Add hook "PS/2 mouse"
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <HITACHI_DK227A-41>
wd0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
wlp0 not found at 0x300
pcic0 at 0x3e0-0x3e1 irq 11 on isa
PC-Card ctlr(0) TI PCI-1131 [CardBus bridge mode] (5 mem & 2 I/O windows)
Add hook "TI PCI-1131 [CardBus bridge mode]"
Add hook "TI PCI-1131 [CardBus bridge mode]"
pcic0: slot 0 controller I/O address 0x3e0
Add hook "TI PCI-1131 [CardBus bridge mode]"
Add hook "TI PCI-1131 [CardBus bridge mode]"
pcic0: slot 1 controller I/O address 0x3e0
pcic0 not found at 0x3e4
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: APM BIOS version 0102
apm: Code32 0xf00f0000, Code16 0xf00f0000, Data 0xf0000400
apm: Code entry 0x00005990, Idling CPU disabled, Management enabled
apm: CS32_limit=0xfffe, CS16_limit=0xfffe, DS_limit=0xfffe
apm: Engaged control enabled
apm: found APM BIOS version 1.2
apm: Slow Idling CPU disabled
Add hook "default suspend"
Add hook "default resume"
called apm_event_enable()
Card inserted, slot 0
wlp0: nwid [0:0] mac:[8:0:6a:2a:1e:50]
APM ioctl: cmd = 0x20005005
called apm_event_enable()
wlp0: promiscuous mode enabled
it crashes with the following apm debug output:
APM ioctl: cmd = 0x40185002
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990524150639.A11504>