Date: Wed, 1 Nov 2000 00:24:25 -0700 From: Jason Spencer <jspencer@epsb.net> To: The Hermit Hacker <scrappy@hub.org>, freebsd-stable@freebsd.org Cc: freebsd-stable@freebsd.org Subject: Re: TrackMan Marble+ mouse under XFree86-4 port ... Message-ID: <f04330103b62573591430@[10.250.1.81]> In-Reply-To: <20001031152159.A15863@area51.v-wave.com> References: <00103114445005.00385@kc0dxw-2> <Pine.BSF.4.21.0010311753060.2213-100000@thelab.hub.org> <20001031152159.A15863@area51.v-wave.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 3:22 PM -0700 10/31/2000, Chris Wasser wrote: >On Tue, Oct 31, 2000 at 05:54:00PM -0400, The Hermit Hacker wrote: >> On Tue, 31 Oct 2000, Matt Meola wrote: >> > On Tue, 31 Oct 2000, The Hermit Hacker wrote: > Just upgraded one of my >> > colleagues computers to v4 from ports from v3 > ... she's got a TrackMan >> > Marble+ mouse that worked fantasticly in v3 but > now, if you try to move >> > the pointer around, it goes to one of the corners > and pretty much sits >> > there ... I just had the same problem -- took me a few days to solve. Try >> > re-configging XFree. For some reason, switching the mouse protocol from >> > "PS/2" to "Auto" has it working fine. Try that and see if it helps. -- >> > Matt Meola KC0DXW Bailey, CO, USA >> >> Tried that ... my machine in my office is using the PS/2 mouse interface, >> and I compared configs ... all to no avail ;( > >I use a Logitech Marble PS/2 (and I'm running moused) with XF86 4 my mouse >configuration is as follows and may be applicable, because I experienced >the mouse "wigging out" without the following setup as described above by >Matt Meola: I have similar problems. Every time I build stable I have to remake /dev/psm0 and reboot to get my mouse to not "wig out". This is with moused and the mouse protocol set to "Auto". It doesn't appear to be just XF86 4 though, I get the same behavior on the console. After I remake the device all seems well. I've seen this on two machines, both with logitech mice. -j. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f04330103b62573591430>