Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 1 Mar 2001 15:52:06 +0100 (CET)
From:      Martin Blapp <mb@imp.ch>
To:        simond@irrelevant.org
Cc:        imp@FreeBSD.ORG, mobile@FreeBSD.ORG
Subject:   Re: Support status of RICOH RL5c478 and Intl i82365 ?
Message-ID:  <Pine.BSF.4.21.0103011551510.58240-100000@levais.imp.ch>
In-Reply-To: <20010301143338.A42377@irrelevant.org>

next in thread | previous in thread | raw e-mail | index | archive | help

Hi,

Fixed my problem. Thanks a lot !

Martin

Martin Blapp, mb@imp.ch
------------------------------------------------
Improware AG, UNIX solution and service provider
Zurlindenstrasse 29, 4133 Pratteln, Switzerland
Phone: +41 79 370 26 05, Fax: +41 61 826 93 01
------------------------------------------------

On Thu, 1 Mar 2001 simond@irrelevant.org wrote:

> On Thu, Mar 01, 2001 at 03:28:46PM +0100, Martin Blapp wrote:
> > 
> > Hi Warner,
> > 
> > Is support of RICOH RL5c478 fixed now ? All the new
> > Sony Vaios have them included and pccardd is not working ...
> > 
> > pcic-pci0: <Ricoh RL5478 PCI-CardBus Bridge> at device 12.0 on pci0
> > pcic-pci1: <Ricoh RL5478 PCI-CardBus Bridge> at device 12.1 on pci0
> > ...
> > pcic0 : <Intl i82365> at port 0x3e0 iomem 0xd000 irq 10 on isa0
> > pcic0 : management irq 10
> > pccard0: <PC Card bus -- kludge version > on pcic0
> > pccard1: <PC Card bus -- kludge version > on pcic0
> > 
> > Dumpcis seems not to work on the machine and so pccardd detects cards
> > being inserted and removed but comes up with 'no card in database for
> > "(null)"("(null)") '.
> 
> Speaking from experience, this chipset works fine:
> pcic-pci0: <Ricoh RL5C478 PCI-CardBus Bridge> at device 12.0 on pci0
> pcic-pci1: <Ricoh RL5C478 PCI-CardBus Bridge> at device 12.1 on pci0
> pccard0: <PC Card bus -- kludge version> on pcic0
> pccard1: <PC Card bus -- kludge version> on pcic0
> pccard: card inserted, slot 1
> ed0 at port 0x300-0x31f irq 11 slot 1 on pccard1
> ed0: address 00:e0:98:71:4c:a0, type Linksys (16 bit) 
> 
> I got the same symptoms when I first installed FreeBSD on my vaio f807k, I
> fixed it by adding
> pccard_mem="0xd4000"
> into my /etc/rc.conf file
> 
> Hope this helps you.
> 
> -- 
> Simon Dick					simond@irrelevant.org
> "Why do I get this urge to go bowling everytime I see Tux?"
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0103011551510.58240-100000>