Date: Thu, 07 Mar 2002 16:11:42 -0800 From: Drew <drew@no6.com> To: Kevin Oberman <oberman@es.net> Cc: freebsd-mobile@freebsd.org Subject: Re: pccard0 problems Message-ID: <3C8801BE.9030900@no6.com> References: <20020307224959.AD1205D0B@ptavv.es.net>
next in thread | previous in thread | raw e-mail | index | archive | help
>
>
>>I have a Lucent silver wireless card and a 3com megahertz 3c589D nic,
>>both are detected and work fine while in pccard1, but both report No
>>card in database for "(null)"("(null)") when in pccard0
>>
>>Both cards when in slot 1 use 0x240-0x27f irq 11
>>
>>I'm sure theres some memory or irq problem, but I'm pretty new to BSD
>>and don't know how to fix it.
>>
>
>We need a bit to go on. What version of FreeBSD? dmesg output? If you
>are using PCI interrupt routing (the default with 4.4 and newer), the
>slots will share an IRQ, so that is probably not the problem.
>
>There is a problem with some hardware that results in only one slot
>working, although I thought it was usually slot 0 that worked and slot
>one that failed.
>
sorry, here's dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Thu Mar 7 12:39:18 GMT 2002
root@dhcppc2.sfba.attbi.com <http://us.f100.mail.yahoo.com/ym/Compose?To=root@dhcppc2.sfba.attbi.com&YY=9727&order=down&sort=date&pos=0>:/usr/src/sys/compile/CUSTOM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
config> di sio1
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> en pcic1
config> po pcic1 0x3e2
config> ir pcic1 0
config> iom pcic1 0xd4000
config> f pcic1 0
config> q
avail memory = 44204032 (43168K bytes)
Preloaded elf kernel "kernel" at 0xc04b8000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04b809c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
chip1: <PCI to Other bridge (vendor=8086 device=1234)> at device 1.0 on
pci0
pcic0: <Cirrus Logic PD6729/6730 PC-Card Controller> port 0xfc5c-0xfc5f
at device 19.0 on pci0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
pci0: <Cirrus Logic GD7548 SVGA controller> at 20.0 irq 9
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 2067MB <IBM-DCRA-22160> [4200/16/63] at ata0-master BIOSPIO
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 1
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 1 on pccard1
wi0: Ethernet address: 00:02:2d:28:bb:f4
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
pccard: card removed, slot 0
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: timeout in wi_seek to fc80/0; last status ffff
wi0: detached
pccard: card removed, slot 1
stray irq 11
pccard: card inserted, slot 1
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 1 on
pccard1
ep0: Ethernet address 00:00:86:17:23:5c
ep0: detached
pccard: card removed, slot 1
stray irq 11
pccard: card inserted, slot 1
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 1 on
pccard1
ep0: Ethernet address 00:00:86:17:23:5c
ep0: detached
pccard: card removed, slot 1
stray irq 11
pccard: card inserted, slot 1
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 1 on
pccard1
ep0: Ethernet address 00:00:86:17:23:5c
ep0: detached
pccard: card removed, slot 1
stray irq 11
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 1
ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 1 on
pccard1
ep0: Ethernet address 00:00:86:17:23:5c
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C8801BE.9030900>