Date: Tue, 22 Oct 2002 13:31:29 -0400 From: Chip Marshall <chip@chocobo.cx> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: PCMCIA Problems with sio and wi Message-ID: <20021022173128.GA5868@chocobo.cx> In-Reply-To: <20021022.095003.79284184.imp@bsdimp.com> References: <20021022142437.GA697@chocobo.cx> <20021022.095003.79284184.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--H+4ONPRPur6+Ovig Content-Type: multipart/mixed; boundary="ReaqsoxgOBHFXBhH" Content-Disposition: inline --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On October 22, 2002, M. Warner Losh sent me the following: > That should be fine. There's only one interrupt pin on these > bridges. Maybe you could run with ISA interrupts instead of the > default PCI interrupts for the chip. However, without dmesg it is > hard to know for sure. I'll attach a dmesg output to this message, hopefully that'll help. I tried dropped hw.pcic.intr_path=3D1 into loader.conf and rebooting. That seems to have helped, though I'm not 100% the wi card is happy right now, since I don't have an AP here to test with. > Do you get these problems all the time, or just some of the time. Are > both of them in use all the time? Maybe we have a starvation > situation here. The wi driver's ISR is very piggy when it comes to > hogging the CPU. The problems occured while I was at home using the wireless ethernet and attempted to talk to my GPS via the serial card. If I wasn't talking to the serial device it seemed to do okay. --=20 Chip Marshall <chip@chocobo.cx> http://www.chocobo.cx/chip/ GCM/CS d+(-) s+:++ a21>? C++ UB++++$ P+++$ L- E--- W++ N@ o K- w O M+ V-- PS+ PE Y+ PGP++ t+@ R@ tv@ b++@ DI++++ D+(-) G++ e>++ h>++ r++ y? --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #6: Thu Oct 10 21:57:09 EDT 2002 root@tonberry.chocobo.cx:/usr/obj/usr/src/sys/TONBERRY Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1126.83-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 267911168 (261632K bytes) avail memory =3D 256958464 (250936K bytes) Preloaded elf kernel "kernel" at 0xc039c000. Preloaded elf module "linux.ko" at 0xc039c09c. Preloaded elf module "agp.ko" at 0xc039c13c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device = 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D3576)> at device 1.0 on p= ci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 9 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f i= rq 9 at device 29.0 on pci0 uhci0: LegSup =3D 0x0000003b usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2 uhub1: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 3,= iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: Logitech Logitech USB Keyboard, rev 1.10/12.00, addr 4, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/12.00, addr 4, iclass 3/0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f i= rq 9 at device 29.1 on pci0 uhci1: LegSup =3D 0x00000010 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f a= t device 29.2 on pci0 pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1 pci_cfgintr: 0:29 INTC routed to irq 9 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2 pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D2448)> at device 30.0 on = pci0 pci2: <PCI bus> on pcib2 pci2: <unknown card> (vendor=3D0x104c, dev=3D0x8021) at 2.0 pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pccard0: <PC Card 16-bit bus (classic)> on pcic0 pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0 pci_cfgintr: 2:5 INTB routed to irq 3 pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2 pcic1: PCI Memory allocated: 0x88001000 pccard1: <PC Card 16-bit bus (classic)> on pcic1 fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff= irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:43:0f:08 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=3D8086 device=3D248c)> at device 31.0 on = pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x17= 0-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f at devi= ce 31.3 on pci0 pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0 pci_cfgintr: 0:31 INTB routed to irq 3 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2485) at 31.5 irq 9 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2486) at 31.6 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdfff= f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 spic0: device model type =3D 2 spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0 IPsec: Initialized Security Association Processing. ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100 acd0: CD-RW <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0x= d010ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized radeon 1.1.1 20010405 on minor 0 pccard: card inserted, slot 0 sio1 at port 0x2f8-0x2ff irq 3 flags 0x40000 slot 0 on pccard0 sio1: type 16550A sio1: unable to activate interrupt in fast mode - using normal mode pccard: card inserted, slot 1 wi0 at port 0x240-0x27f irq 3 slot 1 on pccard1 wi0: 802.11 address: 00:04:e2:0e:46:4f wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A wi0: Intersil Firmware: Primary 0.03.00, Station 0.07.06 Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 19 5 3=20 done Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #6: Thu Oct 10 21:57:09 EDT 2002 root@tonberry.chocobo.cx:/usr/obj/usr/src/sys/TONBERRY Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1126.83-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 267911168 (261632K bytes) avail memory =3D 256958464 (250936K bytes) Preloaded elf kernel "kernel" at 0xc039c000. Preloaded elf module "linux.ko" at 0xc039c09c. Preloaded elf module "agp.ko" at 0xc039c13c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device = 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D3576)> at device 1.0 on p= ci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 9 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f i= rq 9 at device 29.0 on pci0 uhci0: LegSup =3D 0x0000003b usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Genesys Logic USB Hub, class 9/0, rev 1.01/0.12, addr 2 uhub1: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 3,= iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: Logitech Logitech USB Keyboard, rev 1.10/12.00, addr 4, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/12.00, addr 4, iclass 3/0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f i= rq 9 at device 29.1 on pci0 uhci1: LegSup =3D 0x00000010 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f a= t device 29.2 on pci0 pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1 pci_cfgintr: 0:29 INTC routed to irq 9 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2 pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D2448)> at device 30.0 on = pci0 pci2: <PCI bus> on pcib2 pci2: <unknown card> (vendor=3D0x104c, dev=3D0x8021) at 2.0 pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 0 at device 5.1 on pci2 pcic1: PCI Memory allocated: 0x88001000 pcic1: Polling mode pccard1: <PC Card 16-bit bus (classic)> on pcic1 fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff= irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:43:0f:08 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=3D8086 device=3D248c)> at device 31.0 on = pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x17= 0-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f at devi= ce 31.3 on pci0 pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0 pci_cfgintr: 0:31 INTB routed to irq 3 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2485) at 31.5 irq 9 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2486) at 31.6 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdfff= f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 spic0: device model type =3D 2 spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0 IPsec: Initialized Security Association Processing. ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100 acd0: CD-RW <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 pccard: card inserted, slot 1 drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0x= d010ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized radeon 1.1.1 20010405 on minor 0 sio1 at port 0x2f8-0x2ff irq 5 flags 0x40000 slot 0 on pccard0 sio1: type 16550A wi0 at port 0x240-0x27f irq 10 slot 1 on pccard1 wi0: 802.11 address: 00:04:e2:0e:46:4f wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A wi0: Intersil Firmware: Primary 0.03.00, Station 0.07.06 sio1: unloaded sio1: detached pccard: card deactivated, slot 0 pccard: card removed, slot 0 pccard: card inserted, slot 0 sio1 at port 0x2f8-0x2ff irq 5 flags 0x40000 slot 0 on pccard0 sio1: type 16550A --ReaqsoxgOBHFXBhH-- --H+4ONPRPur6+Ovig Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE9tYtw8vyTVl6qbdQRAsX8AJ4pOx1bhg/WSawa0AFgIomytbA7FgCfWXD/ 91YZ22ezDn1vux1bbXAxD9g= =7Fw8 -----END PGP SIGNATURE----- --H+4ONPRPur6+Ovig-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021022173128.GA5868>