Date: Wed, 2 Apr 2003 08:14:55 -0800 (PST) From: "W. J. Williams" <will@willardjwilliams.com> To: "W. J. Williams" <will@willardjwilliams.com>, freebsd-questions@freebsd.org Subject: Re: Gigabit ethernet SMC Tigercard 1000 Message-ID: <20030402161455.39703.qmail@web13503.mail.yahoo.com> In-Reply-To: <20030402161054.82825.qmail@web13507.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
ok, that was dumb, the inphy0 doesnt relate to the gig-e card...do I need to activate something in the kernel to support? > Does anyone know how to configure this. > > I have installed the card and connected to my switch. have noticed I > now > have interfaces > > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > inphy1: <i82555 10/100 media interface> on miibus1 > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > not sure why listed twice...or if this even relates to the card seeing > how > it doesnt say 1000base-SX > > here is what the entire interface section looks like (from DMESG): > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem > 0xfb000000-0xfb0fffff,0xfb201000-0xfb201fff irq 10 at device 3.0 on pci0 > fxp0: Ethernet address 00:d0:b7:b7:66:eb > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x5440-0x547f mem > 0xfb100000-0xfb1fffff,0xfb202000-0xfb202fff irq 5 at device 6.0 on pci0 > fxp1: Ethernet address 00:02:b3:10:e4:13 > inphy1: <i82555 10/100 media interface> on miibus1 > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > Here is the output of ifconfig: > > fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.0.2 netmask 0xfffff800 broadcast 192.168.7.255 > inet6 fe80::2d0:b7ff:feb7:66eb%fxp0 prefixlen 64 scopeid 0x1 > ether 00:d0:b7:b7:66:eb > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 > inet6 fe80::202:b3ff:fe10:e413%fxp1 prefixlen 64 scopeid 0x2 > ether 00:02:b3:10:e4:13 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > > I am running two 100baseT nics on this box... > > appreciate any help. > > Will > > > > > ===== > Will Williams > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" ===== Will Williams
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030402161455.39703.qmail>