Date: Fri, 2 Jan 2004 19:12:47 +0100 From: Daniel Ortiz <d.ortiz@in.ilimit.es> To: freebsd-hardware@freebsd.org Subject: Re: atacontrol/udma Message-ID: <20040102181247.GC211@in.ilimit.es> In-Reply-To: <20040102174412.GA11623@StefanEsser.FreeBSD.org> References: <20040102114156.GB7190@in.ilimit.es> <20040102171730.GB11022@StefanEsser.FreeBSD.org> <20040102172838.GB211@in.ilimit.es> <20040102174412.GA11623@StefanEsser.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--WplhKdTI2c8ulnbP Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Jan 02, 2004 at 06:44:12PM +0100, Stefan E=DFer wrote: > Serial ATA works on my mainboard (with a Promise PDC20376 chip). > The probe message talks about UDMA100 instead of SATA150: >=20 > atapci0: <Promise PDC20376 SATA150 controller> port 0xa800-0xa87f,0xb000-= 0xb00f,0xb400-0xb43f mem 0xcd800000-0xcd81ffff,0xce000000-0xce000fff irq 17= at device 8.0 on pci0 > ad4: 157066MB <HDS722516VLSA80> [319120/16/63] at ata2-master UDMA100 I'm must use FreeBSD 4.8 or 4.9 with this server for use H-Sphere (doesn't support 5.x branch). The motherboard has an Intel ICH5 chipset and all motherboard devices are supported and detected by the kernel. In /usr/src/sys/dev/ata/ata-pci.c and ata-dma.c appears to be supported. [taik0@dani][~]# grep ICH5 /usr/src/sys/dev/ata/* /usr/src/sys/dev/ata/ata-dma.c: case 0x24db8086: /* Intel ICH5 */ /usr/src/sys/dev/ata/ata-dma.c: case 0x24d18086: /* Intel ICH5 SATA */ /usr/src/sys/dev/ata/ata-pci.c: return "Intel ICH5 SATA150 controller"; /usr/src/sys/dev/ata/ata-pci.c: return "Intel ICH5 ATA100 controller"; /usr/src/sys/dev/ata/ata-pci.c: case 0x24d18086: /* Intel ICH5 SATA150 */ I must can set any UDMA mode with atacontrol, but doesn't work always return the UDMA33 mode. Do you have any special option in your kernel configuration or a setting in sysctl? Thanks in advance --=20 -- Daniel Ortiz d.ortiz@in.ilimit.es --WplhKdTI2c8ulnbP Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/9bSfPprEQTARuLoRAqj0AKC5uxri7auBACdiwL7ITgt7iIY04gCeOKmt ZIsJHiXho/h8Pzm4U+rDalc= =kOHn -----END PGP SIGNATURE----- --WplhKdTI2c8ulnbP--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040102181247.GC211>