Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 13 Apr 2004 14:05:57 -0500
From:      Doug Poland <dpoland@omniresources.com>
To:        Josh Paetzel <friar_josh@tcbug.org>
Cc:        questions@freebsd.org
Subject:   Re: GeForce FX 5800 Ultra with Nvidia Drivers on 5.2
Message-ID:  <20040413190444.GB49628@omniresources.com>
In-Reply-To: <20040413184034.GC43303@ns1.tcbug.org>
References:  <1081865042.4879.28.camel@Shaun> <20040413161337.GA48630@omniresources.com> <1081878637.767.45.camel@Shaun> <20040413184034.GC43303@ns1.tcbug.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 13, 2004 at 01:40:34PM -0500, Josh Paetzel wrote:
> 
> My issue is that SMP + Nvidia Drivers + GF4 ti 4200 + 5.2.1-RELEASE, 
> 4.10-RELEASE or -STABLE or CURRENT hangs the system.  I've mailed the 
> -questions mailing list once, and found someone with the exact same issue that 
> I am having, but I suspect it's arcane enough that no one is going to try to 
> fix it.  For now running the nv driver is acceptable.
> 

The only difference between one of my systems (Dell Dimension 4600) and
what you describe is SMP.  I've got a HTT CPU and it's running the
nVidia driver in dual-head.  


-- 
Regards,
Doug


Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #1: Mon Mar  1 16:24:28 CST 2004
    dpoland@atwdtbsd5x2822.polands.org:/usr/src/sys/i386/compile/DELL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0954000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0954294.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0954340.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc09543ec.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0954498.
MPTable: <DELL     Dim 4600i   >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2593.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073152000 (1023 MB)
avail memory = 1033007104 (985 MB)
ioapic0: Changing APIC ID to 2
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00feae0
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 29 INTA routed to irq 16
pcib0: slot 29 INTB routed to irq 19
pcib0: slot 29 INTC routed to irq 18
pcib0: slot 29 INTA routed to irq 16
pcib0: slot 29 INTD routed to irq 23
pcib0: slot 31 INTA routed to irq 18
pcib0: slot 31 INTA routed to irq 18
pcib0: slot 31 INTB routed to irq 17
pcib0: slot 31 INTB routed to irq 17
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA routed to irq 16
nvidia0: <GeForce4 Ti 4200 with AGP8X> mem 0xf0000000-0xf7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcib2: slot 8 INTA routed to irq 20
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfcfff000-0xfcffffff irq 20 at device 8.0 on pci2
fxp0: Ethernet address 00:0c:f1:98:50:96
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfebffc00-0xfebfffff irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xfe00 on atapci1
ata2: [MPSAFE]
ata3: at 0xfe20 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xedc0-0xedff,0xee00-0xeeff mem 0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1980 AC97 Codec>
orm0: <Option ROMs> at iomem 0xd0800-0xd3fff,0xcf000-0xd07ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 2593513908 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc69f2660
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc69f2460
ad1: 19092MB <WDC WD200BB-00AUA1> [38792/16/63] at ata0-slave UDMA100
ata1-master: FAILURE - SETFEATURES SET TRANSFER MODE no interrupt
acd0: CDRW <SONY CD-RW CRX216E> at ata1-master BIOSPIO
Mounting root from ufs:/dev/ad1s1a



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040413190444.GB49628>