Date: Mon, 24 Jul 2006 08:35:25 -0600 From: "Chad Leigh -- Shire.Net LLC" <chad@shire.net> To: Tamouh H. <hakmi@rogers.com> Cc: 'Jahilliya' <jahilliya@gmail.com>, 'FreeBSD Questions' <freebsd-questions@freebsd.org> Subject: Re: Adaptec 2410SA Raid and Hot swapping Message-ID: <6046A1A9-C5B0-450C-82C6-F3BF233619C4@shire.net> In-Reply-To: <20060724143055.E492043E1C@mx1.FreeBSD.org> References: <20060724143055.E492043E1C@mx1.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jul 24, 2006, at 8:30 AM, Tamouh H. wrote: >>>> Hey, >>>> >>>> I have a couple Adaptec 2410SA Raid cards (aac driver) and I was >>>> wondering if anyone has had any luck with being able to hotswap >>>> drives in FreeBSD 6? >>>> If the Adaptec card is no good for hot swapping under FreeBSD, >>>> what's the recommended brand? >>>> >>>> Thanks >>>> Daniel >>> >>> I've 2230SLP which hot-swapped no problem under FBSD 5.4 >> and I doubt >>> it'll have issues with 6.x . Though performance write speed >> is very bad! >>> >>> Tamouh >>> >> Did you use the aaccli tool to initiate/powerdown the drives >> and rebuild the array? > > Nope, didn't need to do. Just removed the hot-swap drive, replaced > it. The controller picked-up the new drive and rebuilt the RAID. > This was RAID-5. > > The aaccli tool stopped working with the latest card firmware, so > now there is no way to manage the card from within FreeBSD. Are you using the FreeBSD aaccli or the Linux aaccli under the linux compatibility stuff? Try the aaccli from Linux (download from Adaptec directly). I have the latest 2200s firmware and it works fine from FreeBSD. Chad --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6046A1A9-C5B0-450C-82C6-F3BF233619C4>