Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Mar 2011 09:34:56 +0200
From:      "Sergey V. Dyatko" <sergey.dyatko@gmail.com>
To:        Aleksandr Rybalko <ray@dlink.ua>
Cc:        current-list freebsd <freebsd-current@freebsd.org>
Subject:   Re: [CFR]rt2860 driver with kld module
Message-ID:  <20110318093456.6e9311ac@gmail.com>
In-Reply-To: <20110317175321.eb942d05.ray@dlink.ua>
References:  <20110314162936.d3f8fd5b.ray@dlink.ua> <4D80EE33.7010703@janh.de> <20110316204405.9308757d.ray@ddteam.net> <20110317132616.444fd733.ray@dlink.ua> <20110317171717.00a46365@gmail.com> <20110317175321.eb942d05.ray@dlink.ua>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 17 Mar 2011 17:53:21 +0200
Aleksandr Rybalko <ray@dlink.ua> wrote:

> On Thu, 17 Mar 2011 17:17:17 +0200
> "Sergey V. Dyatko" <sergey.dyatko@gmail.com> wrote:
> 
> >> On Thu, 17 Mar 2011 13:26:16 +0200
> >> Aleksandr Rybalko <ray@dlink.ua> wrote:
> >> 
> >> > Hi again!
> >> > 
> >> > On Wed, 16 Mar 2011 20:44:05 +0200
> >> > Aleksandr Rybalko <ray@ddteam.net> wrote:
> >> > 
> >> > >> Hi,
> >> > >> 
> >> > >> On Wed, 16 Mar 2011 18:06:59 +0100
> >> > >> Jan Henrik Sylvester <me@janh.de> wrote:
> >> > >> 
> >> > >> > Hello!
> >> > >> > 
> >> > >> > On 01/-10/-28163 20:59, Aleksandr Rybalko wrote:
> >> > >> > > 3. RT2860 802.11n controller authors Damien Bergamini and
> >> > >> > > Alexander Egorenkov
> >> > >> > > http://my.ddteam.net/files/2011-03-14_rt2860.patch only
> >> > >> > > modification to work with RT2872 (embedded to RT305[02] F)
> >> > >> > > wrote by me.
> >> > >> > 
> >> > >> > Is this supposed to work on its own bringing support for
> >> > >> > Ralink 2860 to FreeBSD? (The one in the Asus EeePC
> >> > >> > 901/1000H according to http://wiki.freebsd.org/AsusEee .)
> >> > >> > 
> >> > >> > > Remaining issues:
> >> > >> > > 	RT2860 support only Open(no crypto) mode for
> >> > >> > > RT305[02]F
> >> > >> > 
> >> > >> > Does this mean WPA should work for RT2860? (Just not for the
> >> > >> > chips you added support for?)
> >> > >> 
> >> > >> As I know this driver support WPA, but best place to read/ask
> >> > >> about this on this thread
> >> > >> http://forums.freebsd.org/showthread.php?t=7010
> >> > >> 
> >> > >> > 
> >> > >> > If this is supposed to bring RT2860 support to FreeBSD in
> >> > >> > general:
> >> > >> > 
> >> > >> > - Should it work on amd64 and i386?
> >> > >> > - Should it work on 8.2-RELEASE?
> >> > >> > - Should it work as a module?
> >> > >> > 
> >> > >> > In case this is all supposed to work: I tried to create a
> >> > >> > module on 8.2-RELEASE/amd64 by adding a simple
> >> > >> > sys/modules/rt2860/Makefile (as I did not want to modify my
> >> > >> > stock 8.2-RELEASE kernel). I only got to:
> >> > >> > 
> >> > >> > In file included from 
> >> > >> > /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860.c:19:
> >> > >> > @/dev/rt2860/rt2860_softc.h:52:24: error: opt_rt2860.h: No
> >> > >> > such file or directory
> >> > >> > 
> >> > >> > I do not find opt_rt2860.h anywhere in your patches.
> >> > >> > Assuming it was optional, I have commented it out only to
> >> > >> > get to:
> >> > >> > 
> >> > >> > cc1: warnings being treated as errors
> >> > >> > /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860_pci.c:63:
> >> > >> > warning: 'rt2860_pci_detach' declared 'static' but never
> >> > >> > defined
> >> > >> > 
> >> > >> > Probably, I am doing something unsupported here (especially
> >> > >> > as there is no if_rt2860_pci.c, which I would expect).
> >> > >> 
> >> > >> No, it's me. Too much data, so I a little confused here.
> >> > >> Patch targeting to start support RT3052F/RT3050F System on
> >> > >> Chip. Which main part for embedded systems like routers, AP
> >> > >> etc.
> >> > >> 
> >> > >> To get it compiled need remove 'rt2860_pci_detach'
> >> > >> declaration, because pci and obio interfaces have same detach
> >> > >> device methods (rt2860_detach in rt2860.c)
> >> > >> 
> >> > >> And opt_rt2860.h must be defined in sys/conf/options
> >> > >> <code>
> >> > >> # options for the Ralink RT286x driver (rt2860)
> >> > >> RT2860_DEBUG            opt_rt2860.h
> >> > >> </code>
> >> > >> 
> >> > >> > 
> >> > >> > Cheers,
> >> > >> > Jan Henrik
> >> > >> 
> >> > >> I will remake patch tomorrow.
> >> > 
> >> > Fixed patch here
> >> > http://my.ddteam.net/files/2011-03-17_rt2860.patch
> >> > 
> >> include "opt_rt2860.h" still here (rt2860_softc.h), I removed it,
> >> write simple Makefile:
> >> 
> >> laptop# cat Makefile
> >> # $FreeBSD$
> >> 
> >> .PATH: ${.CURDIR}/../../dev/rt2860
> >> 
> >> KMOD=   if_rt2860
> >> SRCS=   rt2860.c
> >> SRCS+=  device_if.h bus_if.h pci_if.h
> >> .include <bsd.kmod.mk>
> >> 
> >> laptop# pwd
> >> /usr/src/sys/modules/rt2860
> >> laptop# make
> >> Warning: Object directory not changed from
> >> original /usr/src/sys/modules/rt2860 @ -> /usr/src/sys
> >> machine -> /usr/src/sys/i386/include
> >> x86 -> /usr/src/sys/x86/include
> >> awk -f @/tools/makeobjops.awk @/kern/device_if.m -h
> >> awk -f @/tools/makeobjops.awk @/kern/bus_if.m -h
> >> awk -f @/tools/makeobjops.awk @/dev/pci/pci_if.m -h
> >> cc -O2 -pipe -fno-strict-aliasing -Werror -D_KERNEL -DKLD_MODULE
> >> -nostdinc   -I. -I@ -I@/contrib/altq -finline-limit=8000 --param
> >> inline-unit-growth=100 --param large-function-growth=1000
> >> -fno-common -mno-align-long-strings -mpreferred-stack-boundary=2
> >> -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -msoft-float
> >> -ffreestanding -fstack-protector -std=iso9899:1999
> >> -fstack-protector -Wall -Wredundant-decls -Wnested-externs
> >> -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline
> >> -Wcast-qual  -Wundef -Wno-pointer-sign -fformat-extensions
> >> -c /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860.c ld  -d
> >> -warn-common -r -d -o if_rt2860.kld rt2860.o :> export_syms awk
> >> -f /usr/src/sys/modules/rt2860/../../conf/kmod_syms.awk
> >> if_rt2860.kld export_syms | xargs -J% objcopy % if_rt2860.kld ld
> >> -Bshareable  -d -warn-common -o if_rt2860.ko if_rt2860.kld objcopy
> >> --strip-debug if_rt2860.ko
> >> laptop# kldload ./if_rt2860.ko
> >> kldload: can't load ./if_rt2860.ko: No such file or directory
> >> 
> >> dmesg: link_elf: symbol rt2860_io_mac_write undefined
> 
> Yeah, this is because you don't expect what driver have more than one
> source file.
> 
> 
> >> 
> >> p.s. let me know if you need any additional information
> >> 
> >> > >> 
> >> > >> Thanks for your report and questions?
> >> > >> 
> >> > >> -- 
> >> > >> Aleksandr Rybalko <ray@ddteam.net>
> >> > 
> >> > Many thanks for help.
> >> > 
> >> 
> >> 
> 
> new patch with kld support
> http://my.ddteam.net/files/2011-03-17_1_rt2860.patch
> 
> I don't expect so much interest for this device on a PCI bus. And
> forget to include useful parts like kld Makefile. Seems now this can
> compile and work :)
> 

panic:
http://tiger.ipfw.ru/files/core_rt2860.txt

> Thank you.
> 



-- 
wbr, tiger



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110318093456.6e9311ac>