Date: Mon, 14 Jun 1999 10:12:12 -0700 (PDT) From: Mike Meyer <mwm@phone.net> To: Kent Stewart <kstewart@3-cities.com> Cc: freebsd-stable@freebsd.org Subject: Re: Yamaha CD-R[W] drives (Re: Is the CD driver) Message-ID: <Pine.BSF.4.10.9906141010490.63871-100000@guru.phone.net> In-Reply-To: <37653482.115577EC@3-cities.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Unless Win98 is a lot stupider than I think, I'll have a disk that will add the IDE CD-ROM on the e-machines, but won't add either of the SCSI CD-ROM's on the FreeBSD box with the CDRW on it. Thanx, <mike On Mon, 14 Jun 1999, Kent Stewart wrote: > Date: Mon, 14 Jun 1999 09:57:38 -0700 > From: Kent Stewart <kstewart@3-cities.com> > To: Mike Meyer <mwm@phone.net> > Cc: freebsd-stable@freebsd.org > Subject: Re: Yamaha CD-R[W] drives (Re: Is the CD driver) > > Choose > Start > settings > control panel > add/remove progs > startup > disk. When you finish creating a startup disk you have a Win98 DOS boot > that will add your CDROM. You need one of these disks around for your > e-machine anyway. > > Kent > > Mike Meyer wrote: > > > > Ok, so where do I find a DOS bootable floppy? The only MS box in the > > house is the children's e-machine, running Windows 98... > > > > <mike > > > > On Mon, 14 Jun 1999, Peter Radcliffe wrote: > > > > > Date: Mon, 14 Jun 1999 11:16:55 -0400 > > > From: Peter Radcliffe <pir@pir.net> > > > To: freebsd-stable@FreeBSD.ORG > > > Subject: Yamaha CD-R[W] drives (Re: Is the CD driver) > > > > > > Stephen Krzywicki <sek@superiorcam.com> probably said: > > > > The latest firmware release from Yamaha may fix this problem. > > > > > > Speaking of firmware upgrades: > > > > > > http://www.yamahayst.com/techsup/flasrom.htm > > > ] For Windows NT and/or UNIX-SGI Users: > > > ] If you are operating under Windows NT or UNIX type environments, you > > > ] must use the DOS Batch utility to upgrade the Yamaha Recorder. Boot > > > ] from a DOS bootable Floppy, configured as shown below for your SCSI > > > ] Card and then run the DOS batch upgrade utility. Otherwise, you must > > > ] take our drive to a DOS, Windows 95, or Macintosh environment to > > > ] upgrade our unit. > > > > > > http://www.yamahayst.com/techsup/cdr400fi.htm > > > ] For Models (CDR400c, CDR400cx, CDR400t, CDR400tx, CDR400AT) > > > ] Version NO.: 1.0q Inquiry Date: Nov. 11, '98 > > > ] 1) Making the same firmware file usable for CDR's and CRW's. > > > ] 2) Extended support for silver media. > > > ] 3) Reducing the noise problem for reading CD-DA discs. > > > > > > Note the extended support for silver (cheepo) media. > > > (similar comments in the CRW4260 section) > > > > > > If you're using a Yamaha CD-R[W], upgrade your firmware tp 1.0q > > > > > > P. > > > > > > -- > > > pir pir@pir.net pir@shore.net pir@net.tufts.edu > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-stable" in the body of the message > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > > -- > Kent Stewart > Richland, WA > > mailto:kstewart@3-cities.com > http://www.3-cities.com/~kstewart/index.html > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9906141010490.63871-100000>