Date: Fri, 15 Jul 2005 13:32:58 -0400 From: Adam Stroud <adam.stroud@gmail.com> To: nawcom <nawcom@nawcom.no-ip.com> Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD will not boot Message-ID: <d1a2799d050715103245a06180@mail.gmail.com> In-Reply-To: <42D7E50A.9090400@nawcom.no-ip.com> References: <d1a2799d050715062026828649@mail.gmail.com> <42D7E50A.9090400@nawcom.no-ip.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for your help. I will have to wait untill I get home to fix the problem (I am at work now). I will let you know how I make out. Thanks Again A On 7/15/05, nawcom <nawcom@nawcom.no-ip.com> wrote: > ok from what ive figured out is that kernel option WITH_LEGACY_GPU_SUPPO= RT > is highly unsupported for the 5.x kernel >=20 > http://www.freebsd.org/cgi/cvsweb.cgi/~checkout~/ports/x11/nvidia-driver/= Makefile?rev=3D1.34&content-type=3Dtext/plain >=20 > my usual suggestion is to use the driver from nvidia.com, nvidia is very > friendly to the open source community - so they have drivers for > freebsd. ive used it myself and agp support works great. >=20 > now - for actually getting back into your system: >=20 > do you have a back up kernel handy in your operating system? >=20 > i know depending on how things are orginally set up when you install a > new kernel > the makefile copies the original kernel folder (/boot/kernel) to > /boot/kernel.old and > /boot/kernel is replaced with the new one. >=20 > when you boot up freebsd and you get to the boot screen - select option > number 6. then > enter the following commands: > >unload > >load /boot/kernel.old/kernel > >boot >=20 > let me know if you make it into the OS and if you do - be sure and > remove that nvidia option! > ok i hope this help let me know of your status. > -Ben >=20 >=20 >=20 >=20 > Adam Stroud wrote: >=20 > >All: > > > >I updated my nvidia drivers from the ports collection (Using the > >WITH_LEGACY_GPU_SUPPORT option to add support for my GeFroce2 GTS). > >During the upgrade process, my machine rebooted on it's own and now > >when I boot I get the following error message: > > > >FreeBSD 5.4-STABLE #0: Fri Jun 24 23:25:37 EDT 2005 > >adam@osirus.stronet.dyndns.org:/usr/obj/usr/src/sys/APS_KERN i386 > > > >kernel trap 18 with interrupts disabled > > > >fatal trap 18: integer divide fault while in kernel mode > > > >instruction pointer =3D 0x8:0xc689f8c > >stack pointer =3D 0x10:0xc1020c88 > >frame pointer =3D 0x10:0xc1020c9c > >code segment =3D base 0x0, 0xfffff, type 0x1b > > =3D DPL 0, pres 1, def32 1, gran= 1 > >processor eflags =3D resume, IOPL=3D0 > >current process =3D 0 () > >trap number =3D 18 > >panic: integer divide fault > >uptime: 1s > > > >Anyone have any ideas? > > > >A > > > > >=20 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d1a2799d050715103245a06180>