Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 02 Feb 2009 08:57:57 -0800
From:      Sam Leffler <sam@freebsd.org>
To:        Subscriber <subscr1024@mail.ru>
Cc:        freebsd-current@freebsd.org
Subject:   Re: ath driver (?) lock system after last update
Message-ID:  <49872615.1040002@freebsd.org>
In-Reply-To: <4986D59A.9080906@mail.ru>
References:  <498652D2.7030906@mail.ru> <49867969.3020406@freebsd.org> <4986D59A.9080906@mail.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Should be fixed by r188011.

Sam

Subscriber wrote:
> Output of 'sysctl dev.ath':
>
> dev.ath.0.%desc: Atheros 5424/2424
> dev.ath.0.%driver: ath
> dev.ath.0.%location: slot=0 function=0
> dev.ath.0.%pnpinfo: vendor=0x168c device=0x001c subvendor=0x1a3b 
> subdevice=0x1026 class=0x020000
> dev.ath.0.%parent: pci2
> dev.ath.0.smoothing_rate: 95
> dev.ath.0.sample_rate: 10
> dev.ath.0.sample_stats: 0
> dev.ath.0.countrycode: 0
> dev.ath.0.regdomain: 96
> dev.ath.0.slottime: 20
> dev.ath.0.acktimeout: 48
> dev.ath.0.ctstimeout: 48
> dev.ath.0.softled: 0
> dev.ath.0.ledpin: 0
> dev.ath.0.ledon: 0
> dev.ath.0.ledidle: 2700
> dev.ath.0.txantenna: 0
> dev.ath.0.rxantenna: 2
> dev.ath.0.diversity: 1
> dev.ath.0.txintrperiod: 5
> dev.ath.0.diag: 0
> dev.ath.0.tpscale: 0
> dev.ath.0.tpc: 0
> dev.ath.0.tpack: 63
> dev.ath.0.tpcts: 63
> dev.ath.0.rfsilent: 1
> dev.ath.0.rfkill: 1
> dev.ath.0.intmit: 1
> dev.ath.0.monpass: 24
>
> I not changed sysctl setting for ath0 because of fine forking with 
> default settings on early drivers.
>
> > and how your card is configured.
> What it means? Wireless network related rc.conf settings?
> if_up_delay="1"
> wlans_ath0=wlan0
> ifconfig_wlan0="WPA DHCP"
>
> I use FreeBSD 7.1 box with Atheros wi-fi card (don't remember exact 
> model, can see later if it need) as wireless AP (bridge).
>
>
> Sam Leffler пишет:
>> Subscriber wrote:
>>> I updated my 8-CURRENT and now system freeze shortly after boot (~0.5-3
>>> minutes). I see following messages in console:
>>>
>>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 
>>> ts_status 0x0
>>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 
>>> ts_status 0x0
>>> ...
>>>
>>> much time, then system freeze. Before last update I was never see 
>>> those messages.
>>> Now I rolled back to HEAD sources with date=2009.01.01, and all 
>>> seems OK.
>>
>>
>>> ath0: <Atheros 5424/2424> mem 0xfd7f0000-0xfd7fffff irq 16 at device 
>>> 0.0 on pci2
>>> ath0: [ITHREAD]
>>> ath0: WARNING: using obsoleted if_watchdog interface
>>> ath0: mac 14.2 phy 7.0 radio 10.2
>>
>> I need to see the output of sysctl dev.ath.0 and how your card is 
>> configured.
>>
>> Sam
>>
>> _______________________________________________
>> freebsd-current@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to 
>> "freebsd-current-unsubscribe@freebsd.org"
>>
>>
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to 
> "freebsd-current-unsubscribe@freebsd.org"
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49872615.1040002>