Date: Wed, 22 Jan 2014 15:46:38 +0100 From: Gerrit =?ISO-8859-1?Q?K=FChn?= <gerrit.kuehn@aei.mpg.de> To: Hans Petter Selasky <hps@bitfrost.no> Cc: freebsd-usb@FreeBSD.org Subject: Re: ATP USB flash failure (regression?) Message-ID: <20140122154638.670d6721.gerrit.kuehn@aei.mpg.de> In-Reply-To: <52DFD7F4.6040109@bitfrost.no> References: <20140122134116.1c589702.gerrit.kuehn@aei.mpg.de> <52DFC03F.6090002@bitfrost.no> <20140122153546.b5c35ef8.gerrit.kuehn@aei.mpg.de> <52DFD7F4.6040109@bitfrost.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 22 Jan 2014 15:38:44 +0100 Hans Petter Selasky <hps@bitfrost.no> wrote about Re: ATP USB flash failure (regression?): HPS> > Well, plugging is not entirely easy in this case, because this HPS> > device is sitting directly on USB header pins on the mainboard. But HPS> > I'll give it a try. HPS> usbconfig -d X.Y reset HPS> also does the trick. Yes, reset works, and the device gets rescanned. But it is still using the same quirks and fails: umass0: at uhub3, port 5, addr 4 (disconnected) umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:8:0:-1: Attached to scbus8 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command cu Gerrit
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140122154638.670d6721.gerrit.kuehn>