Date: Fri, 3 Oct 2014 14:43:26 +0800 From: =?GB2312?Q?"=BB=C6=CE=C4=BB=D4=40Gmail"?= <huanghwh@gmail.com> To: Hans Petter Selasky <hps@selasky.org> Cc: "freebsd-usb@freebsd.org" <freebsd-usb@freebsd.org> Subject: Re: xhci problem on UEFI boot MacBookPro 11,3 Message-ID: <141592A3-A4CD-48F6-B26D-35BF10436012@gmail.com> In-Reply-To: <542E3F02.4050401@selasky.org> References: <CAB8uncZeUjdJAsDcxT81Yx2wHd8EB3QEzortSXsL8R5iuSKJRA@mail.gmail.com> <CAB8uncYd24GkgK8Dsd51BAhoMjKFoAeS3AQ0a0=1mZjeprjHUw@mail.gmail.com> <541FBD6F.2080507@selasky.org> <CAB8uncb%2BHtjDXJG7gS1QGz8ayR%2BwoaO-UWFbwTVXHrCXnQoa2A@mail.gmail.com> <541FDDF0.90502@selasky.org> <CAB8uncZaESbHiDJfYjybTg7mfhq0MG66%2BUqshxqDFVTej6rkeA@mail.gmail.com> <CAB8uncYrf=zP=ithL=dCci4opir4U0AWGCWM3JU38EscPdp3Og@mail.gmail.com> <542662BE.5050908@selasky.org> <CAB8uncYuMvc1hXxJib_bDs%2BAOrYhCfVkaV8O5VtgjFjJo_T2mA@mail.gmail.com> <542701FA.2000408@selasky.org> <5427029B.3060502@selasky.org> <CAB8uncajuWXGc6Lb3AmHC6qdnefXmYF4_8h4VPwzNaM595Dy%2Bg@mail.gmail.com> <5427AC46.3040707@selasky.org> <CAB8uncYZpZ5%2BgAw5FmXTJ8CH5KBpDqaYHqB00b=FEQVXONd4-g@mail.gmail.com> <CAB8uncb6ycJeYaMairr7XnhQBKNtYgYovH2vYNgB_xEGb8BGhw@mail.gmail.com> <CAB8uncZ=9Hi04YKX4VDX0zzOGQPhV61rurwKmHXdz2FouWw5wA@mail.gmail.com> <542E3F02.4050401@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
But xhci should works under freebsd,like Linux without this trick. If you want to debug this further, ping me , I will be free after 2 hours;) Huang Wen Hui > =D4=DA 2014=C4=EA10=D4=C23=C8=D5=A3=AC14:15=A3=ACHans Petter Selasky <hps@= selasky.org> =D0=B4=B5=C0=A3=BA >=20 >> On 10/03/14 05:55, Huang Wen Hui wrote: >> I found that how to connect EHCI controller, use "bless" command in MacOS= X >> with --legacy option: >> 1. open MacOSX terminal, mkdir /Volumes/EFI >> 2. mount -t msdos /dev/disk0s1 /Volumes/EFI >> 3. bless --setBoot --mount /Volumes/EFI --legacy >> 4. reboot MacOSX, press "option" key, you can feel firmware start a littl= e >> slow than without --legacy. I think firmware do some extra things:( >> 5. select both UEFI and BIOS boot FreeBSD, system can connect EHCI and XH= CI >> controller. >> 6. I think BootCamp assistant also add --legacy option. >>=20 >> Cheers, >> Huang Wen Hui >=20 > Hi, >=20 > Sounds good! >=20 > Thanks for figuring this out. At least I found one or two minors in the XH= CI driver while debugging this :-) >=20 > --HPS >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?141592A3-A4CD-48F6-B26D-35BF10436012>