Date: Sat, 17 Oct 2020 22:11:00 +0200 From: rene reckschwardt <rene@reckschwardt.de> To: freebsd-proliant@freebsd.org Subject: Re: Max disk size DL360 G9 Message-ID: <3d73129d-1d6e-ab99-ecaa-2f799f14ffaf@reckschwardt.de> In-Reply-To: <57e2677844606211b9d413288c121020@antiszoc.hu> References: <5a5dfd3d-7a31-bc1a-747e-d06f2274bd54@druid.net> <6cd5718e4fca9efdc8118e2dcc70f532@antiszoc.hu> <718b3c3b-0bb1-52da-e672-3d6749864f14@druid.net> <2c042bba409d18fef31401d75598a5bf@antiszoc.hu> <3525792b-c384-958c-d359-01949cd8bc0f@druid.net> <57e2677844606211b9d413288c121020@antiszoc.hu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, you can use the https://people.freebsd.org/~jcagle/ with compat or you can use the Linux Utils in Linux Emulator. best regards ré > > On 2020-10-17 18:22, D'Arcy Cain wrote: >> On 10/17/20 12:07 PM, andrej@antiszoc.hu wrote: >>> You need the CLI from HPE, howevere I don't know how are they with >>> FreeBSD currently. The utility runs under hpacucli, hpssacli or >>> ssacli regarding the era and version. Az command starting with ctrl >>> is for the ssacli CLI interface. >> >> It's difficult to get someone into the server farm, especially with >> Covid-19. Is there no way to get the information that you are looking >> for from FreeBSD? What are you trying to find out? Maybe I can >> figure it out. I do have sysutils/sysinfo installed if that helps. >> >> The controller is "HP Smart Array P440ar" if that helps. >> > > The CLI is the ssacli (or hpacucli or hpssacli), which runs under the > OS, at least on Linux. That's the intented inline management for the > raid controller. If you have any brand server you should use the > corresponding management sw. Fortunately there is also ipmitools, > however for the RAID card you'll need the specific utility. If you > have access the ILO out-of-band management where you can check the > raid/disk status, but that only shows the actual configuration. > > This is old site: https://people.freebsd.org/~jcagle/ > _______________________________________________ > freebsd-proliant@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-proliant > To unsubscribe, send any mail to > "freebsd-proliant-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3d73129d-1d6e-ab99-ecaa-2f799f14ffaf>