Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Jan 2004 17:15:19 +0300
From:      =?koi8-r?B?4czFy9PFyiDkzcnU0snF18ne?= <novad@newmail.ru>
To:        freebsd-questions@FreeBSD.ORG
Subject:   Re[2]: Problem with foppy drive
Message-ID:  <01192224.20040127171519@newmail.ru>
In-Reply-To: <MIEPLLIBMLEEABPDBIEGOENKFFAA.fbsd_user@a1poweruser.com>
References:  <873340513.20040123145624@newmail.ru> <MIEPLLIBMLEEABPDBIEGOENKFFAA.fbsd_user@a1poweruser.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello Friend
I could not write you earlier because I didn't have Internet so i write
you now.

First time i made default BOIS setup
Than i booted FreeBSD when the table with different boot options
appered i choosed (There is a devil on the right part of the display):
  Boot FreeBSD with ACPI disable
(it has second number)
after it logged in as root
and found that there is fd0-file in /dev and i can mount floppy
drive (i mounted it)and it works good.

Than i rebooted my PC and booted FreeBSD as it does itself (default)
and found that there is no fd0

So whan i boot FreeBSD with ACPI disable it's possible to use floppy.

That's all.
Friday, January 23, 2004, 4:50:00 PM, you wrote:

f> Please explain in detail what you did different this time to get
f> your floppy drive working.

f> How did you disable ACPI?

f> -----Original Message-----
f> From: owner-freebsd-questions@freebsd.org
f> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей
f> Дмитриевич
f> Sent: Friday, January 23, 2004 6:56 AM
f> To: freebsd-questions@FreeBSD.ORG
f> Subject: Problem with foppy drive

f> Hello Support.
f> I have read this files and it didn't help me.
f> Also I booted with GENERIC kernel and my floppy drive didn't work.
f> But this day I booted  in kernel's model where ACPI don't supports
f> at
f> all and my drive worked good. So it helps to solve the problem.

f> Thank you for help.



f> Thursday, January 22, 2004, 7:56:42 PM, you wrote:

f>> Ok friend I found your problem.
f>> You deleted part of the floppy definition out of your custom
f> kernel
f>> source. Look at the GENERIC or LINT kernel source for how the
f>> floppy should be defined and copy those statements into your
f>> custom kernel and recompile.

f>> -----Original Message-----
f>> From: owner-freebsd-questions@freebsd.org
f>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей
f>> Дмитриевич
f>> Sent: Thursday, January 22, 2004 3:45 AM
f>> To: freebsd-questions@FreeBSD.ORG
f>> Subject: Problem with foppy drive

f>> Hello friend

f>> I did everything you wrote about and it didn't help me.
f>> dmesg did not change at all so floppy drive didn't work.
f>> All PnP options was disable from the hole beginning and they are
f>> disable
f>> and now.
f>> But I fount in BIOS one option :"OnBoard FDC".
f>> I disabled it and found that some things have changed in
f> dmesg.boot.
f>> There disappeared lines with some fdc0 errors (i send it in this
f>> e-mail)

f>> Also I send you my kernel configuration maybe i should write or
f>> delete some
f>> lines there.



f>> ---------dmesg-------------------------

f>> Copyright (c) 1992-2003 The FreeBSD Project.
f>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
f> 1993,
f>> 1994
f>>         The Regents of the University of California. All rights
f>> reserved.
f>> FreeBSD 5.1-RELEASE #0: Wed Jan 21 16:35:32 MSK 2004
f>>     root@:/usr/src/sys/i386/compile/NovAD3c
f>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc050b000.
f>> Timecounter "i8254"  frequency 1193182 Hz
f>> Timecounter "TSC"  frequency 1817950912 Hz
f>> CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.95-MHz 686-class
f> CPU)
f>>   Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4

f>>
f> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,
f>> MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
f>> real memory  = 536805376 (511 MB)
f>> avail memory = 515895296 (491 MB)
f>> Pentium Pro MTRR support enabled
f>> acpi0: <AMIINT INTEL845> on motherboard
f>> pcibios: BIOS version 2.10
f>> Using $PIR table, 6 entries at 0xc00f78a0
f>> acpi0: power button is handled as a fixed feature programming
f> model.
f>> Timecounter "ACPI-fast"  frequency 3579545 Hz
f>>     ACPI-1287: *** Error: Method execution failed
f> [\\_SB_.PCI0.MDET]
f>> (Node 0xc150ed20), AE_AML_REGION_LIMIT
f>>     ACPI-1287: *** Error: Method execution failed
f> [\\_SB_.PCI0._CRS]
f>> (Node 0xc150ec60), AE_AML_REGION_LIMIT
f>>     ACPI-0175: *** Error: Method execution failed
f> [\\_SB_.PCI0._CRS]
f>> (Node 0xc150ec60), AE_AML_REGION_LIMIT
f>> can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT
f>>     ACPI-1287: *** Error: Method execution failed
f> [\\_SB_.PCI0.MDET]
f>> (Node 0xc150ed20), AE_AML_REGION_LIMIT
f>>     ACPI-1287: *** Error: Method execution failed
f> [\\_SB_.MEM_._CRS]
f>> (Node 0xc4046a20), AE_AML_REGION_LIMIT
f>>     ACPI-0175: *** Error: Method execution failed
f> [\\_SB_.MEM_._CRS]
f>> (Node 0xc4046a20), AE_AML_REGION_LIMIT
f>> can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT
f>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on
f> acpi0
f>> acpi_cpu0: <CPU> on acpi0
f>> acpi_button0: <Power Button> on acpi0
f>> pcib0: <ACPI Host-PCI bridge> on acpi0
f>> pci0: <ACPI PCI bus> on pcib0
f>> agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe7ffffff
f> at
f>> device 0.0 on pci0
f>> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
f>> pci1: <PCI bus> on pcib1
f>> pci1: <display, VGA> at device 0.0 (no driver attached)
f>> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
f>> pci2: <ACPI PCI bus> on pcib2
f>> pcm0: <Creative EMU10K1> port 0xc800-0xc81f irq 12 at device 3.0
f> on
f>> pci2
f>> pcm0: <SigmaTel STAC9708/11 AC97 Codec>
f>> pci2: <simple comms> at device 4.0 (no driver attached)
f>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
f>> isa0: <ISA bus> on isab0
f>> atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f at
f>> device 31.1 on pci0
f>> ata0: at 0x1f0 irq 14 on atapci0
f>> ata1: at 0x170 irq 15 on atapci0
f>> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
f>> 0xe800-0xe81f irq 12 at device 31.2 on pci0
f>> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
f>> usb0: USB revision 1.0
f>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
f>> uhub0: 2 ports with 2 removable, self powered
f>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
f>> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
f>> 0xec00-0xec1f irq 10 at device 31.4 on pci0
f>> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
f>> usb1: USB revision 1.0
f>> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
f>> uhub1: 2 ports with 2 removable, self powered
f>> sio0 port 0x3f8-0x3ff irq 4 on acpi0
f>> sio0: type 16550A
f>> sio1 port 0x2f8-0x2ff irq 3 on acpi0
f>> sio1: type 16550A
f>> ppc0 port 0x378-0x37f irq 7 on acpi0
f>> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
f>> ppbus0: <Parallel port bus> on ppc0
f>> plip0: <PLIP network interface> on ppbus0
f>> lpt0: <Printer> on ppbus0
f>> lpt0: Interrupt-driven port
f>> ppi0: <Parallel I/O> on ppbus0
f>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on
f> acpi0
f>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
f>> kbd0 at atkbd0
f>> npx0: <math processor> on motherboard
f>> npx0: INT 16 interface
f>> pmtimer0 on isa0
f>> fdc0: cannot reserve I/O port range (6 ports)
f>> pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 5 on isa0
f>> pcic_attach: attach found no sockets
f>> device_probe_and_attach: pcic0 attach returned 6
f>> sc0: <System console> at flags 0x100 on isa0
f>> sc0: VGA <16 virtual consoles, flags=0x300>
f>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
f> on
f>> isa0
f>> Timecounters tick every 10.000 msec
f>> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently
f>> 100.0%
f>> ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
f>> acd0: CD-RW <YAMAHA CRW3200E> at ata1-master PIO4
f>> acd1: CDROM <ASUS CD-S500/A> at ata1-slave PIO4
f>> Mounting root from ufs:/dev/ad0s3a
f>> KLD fire_saver.ko: depends on splash - not available

f>> ---------------------------------------

f>> Here is kernel config
f>> I deleted some devices.
f>> I don't have them but I didn't change lines about floppy (I think
f>> so).

f>> --------------------------------------

f>> machine         i386
f>> cpu             I686_CPU
f>> ident           NovAD_3c

f>> #To statically compile in device wiring instead of
f>> /boot/device.hints
f>> #hints          "GENERIC.hints"         #Default places to look
f> for
f>> devices.

f>> options         CPU_ENABLE_SSE
f>> options         SCHED_4BSD              #4BSD scheduler
f>> options         INET                    #InterNETworking
f>> options         INET6                   #IPv6 communications
f>> protocols
f>> options         FFS                     #Berkeley Fast Filesystem
f>> options         SOFTUPDATES             #Enable FFS soft updates
f>> support
f>> options         UFS_ACL                 #Support for access
f> control
f>> lists
f>> options         UFS_DIRHASH             #Improve performance on
f> big
f>> directories
f>> options         MD_ROOT                 #MD is a potential root
f>> device
f>> options         MSDOSFS                 #MSDOS Filesystem
f>> options         CD9660                  #ISO 9660 Filesystem
f>> options         PROCFS                  #Process filesystem
f>> (requires PSEUDOFS)
f>> options         PSEUDOFS                #Pseudo-filesystem
f> framework
f>> options         COMPAT_43               #Compatible with BSD 4.3
f>> [KEEP THIS!]
f>> options         COMPAT_FREEBSD4         #Compatible with FreeBSD4
f>> options         SCSI_DELAY=15000        #Delay (in ms) before
f>> probing SCSI
f>> options         KTRACE                  #ktrace(1) support
f>> options         SYSVSHM                 #SYSV-style shared memory
f>> options         SYSVMSG                 #SYSV-style message
f> queues
f>> options         SYSVSEM                 #SYSV-style semaphores
f>> options         _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B
f>> real-time extensions
f>> options         KBD_INSTALL_CDEV        # install a CDEV entry in
f>> /dev
f>> options         AHC_REG_PRETTY_PRINT    # Print register
f> bitfields
f>> in debug
f>>                                         # output.  Adds ~128k to
f>> driver.
f>> options         AHD_REG_PRETTY_PRINT    # Print register
f> bitfields
f>> in debug
f>>                                         # output.  Adds ~215k to
f>> driver.

f>> # Debugging for use in -current
f>> #!!!options     INVARIANT_SUPPORT       #Extra sanity checks of
f>> internal structures, required by INVARIANTS

f>> # To make an SMP kernel, the next two are needed

f>> device          isa
f>> device          eisa
f>> device          pci
f>> device          pcm
f>> device          acpi

f>> # Floppy drives
f>> device          fdc

f>> # ATA and ATAPI devices
f>> device          ata
f>> device          atadisk                 # ATA disk drives
f>> device          atapicd                 # ATAPI CDROM drives
f>> device          atapifd                 # ATAPI floppy drives
f>> device          atapist                 # ATAPI tape drives
f>> options         ATA_STATIC_ID           #Static device numbering


f>> # SCSI peripherals
f>> device          scbus           # SCSI bus (required)
f>> device          da              # Direct Access (disks)

f>> # atkbdc0 controls both the keyboard and the PS/2 mouse
f>> device          atkbdc          # AT keyboard controller
f>> device          atkbd           # AT keyboard
f>> device          psm             # PS/2 mouse
f>> device          vga             # VGA video card driver

f>> # syscons is the default console driver, resembling an SCO
f> console
f>> device          sc

f>> device          agp             # support several AGP chipsets

f>> # Floating point support - do not disable.
f>> device          npx

f>> # Add suspend/resume support for the i8254.
f>> device          pmtimer

f>> # PCCARD (PCMCIA) support
f>> # Pcmcia and cardbus bridge support
f>> device          cbb                     # cardbus (yenta) bridge
f>> device          pcic                    # ExCA ISA and PCI
f> bridges
f>> device          pccard                  # PC Card (16-bit) bus
f>> device          cardbus                 # CardBus (32-bit) bus

f>> # Serial (COM) ports
f>> device          sio             # 8250, 16[45]50 based serial
f> ports

f>> # Parallel port
f>> device          ppc
f>> device          ppbus           # Parallel port bus (required)
f>> device          lpt             # Printer
f>> device          plip            # TCP/IP over parallel
f>> device          ppi             # Parallel port interface device

f>> # NOTE: Be sure to keep the 'device miibus' line in order to use
f>> these NICs!
f>> device          miibus          # MII bus support

f>> # Pseudo devices - the number indicates how many units to
f> allocate.
f>> device          random          # Entropy device
f>> device          loop            # Network loopback
f>> device          ether           # Ethernet support
f>> device          sl              # Kernel SLIP
f>> device          ppp             # Kernel PPP
f>> device          tun             # Packet tunnel.
f>> device          pty             # Pseudo-ttys (telnet etc)
f>> device          md              # Memory "disks"
f>> device          gif             # IPv6 and IPv4 tunneling
f>> device          faith           # IPv6-to-IPv4 relaying
f>> (translation)

f>> # The `bpf' device enables the Berkeley Packet Filter.
f>> # Be aware of the administrative consequences of enabling this!
f>> device          bpf             # Berkeley packet filter

f>> # USB support
f>> device          uhci            # UHCI PCI->USB interface
f>> device          ohci            # OHCI PCI->USB interface
f>> device          usb             # USB Bus (required)
f>> device          ugen            # Generic
f>> device          umass           # Disks/Mass storage - Requires
f>> scbus and da

f>> # FireWire support
f>> device          firewire        # FireWire bus code
f>> device          sbp             # SCSI over FireWire (Requires
f> scbus
f>> and da)
f>> #device         fwe             # Ethernet over FireWire
f>> (non-standard!)
f>> --------------------------------------


f>> Tuesday, January 20, 2004, 6:01:53 PM, you wrote:
f>>> Friend
f>>> I think I see your problem in the boot log.
f>>> FBSD is having problems reading your PC's bios.
f>>> Enter your PC bio's menu and disable all options dealing with
f>> power
f>>> management.
f>>> While you are there also disable any plug-n-play option and if
f>> there
f>>> is an operating system option change that to 'other' or at least
f>> not
f>>> ms/windows.

f>>>
f>>
f> http://www.freebsd.org/cgi/man.cgi?query=acpi&apropos=0&sektion=0&ma
f>>> npath=FreeBSD+5.2-RELEASE+and+Ports&format=html

f>>> acpi -- Advanced Configuration and Power Management support



f>>> -----Original Message-----
f>>> From: owner-freebsd-questions@freebsd.org
f>>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей
f>>> Дмитриевич
f>>> Sent: Tuesday, January 20, 2004 8:16 AM
f>>> To: freebsd-questions@FreeBSD.ORG
f>>> Subject: Problem with foppy drive

f>>> Hello Друг( it means friend on russian)

f>>> Now I'll try to answer your questions.
f>>> I tested my floppy drive in the same way
f>>> 1. Boot one Operating System
f>>> 2. Write some data on the floppy disc (usually it is mp3-files
f> or
f>>>    jpg-files)
f>>> 3. Reboot my PC and boot another OS
f>>> 4. Check data - everything good
f>>> 5. Format disc and test again in the same way

f>>> Also I read and wrote data on my discs on another PC during this
f>>> term
f>>> and didn't have problems

f>>> Next question about hardware

f>>>  1. Soltek mainboard
f>>>    SL-85DIR
f>>>    Socket 478 Mainboard
f>>>    Intel 845d series
f>>>  2. nVidia G-force 4 MX 440 64MB DDR (AGP)
f>>>  3. 512MB DDR RAM memory
f>>>  4. Creative Sound Blaster Live!5.1
f>>>  5. Winmodem ZyXEL Omni 56K PCI (i thinc FreeBSD know nothing
f>> about
f>>> it)
f>>>  6. Asus CD-ROM drive 50x IDE
f>>>  7. Yamaha 3200 CD-RW drive
f>>>  8. Intel Pentium 4 Processor Socket 478
f>>>  9. HDD 40 Gb SEAGATE UDMA 7200 BARRACUDA
f>>> 10. and this floppy drive
f>>> I think that's all
f>>> My PC is 1.5 years old.
f>>> I bought in 24-July-2002
f>>> About scsi:
f>>> There is no scsi in my computer so floppy drive is not scsi

f>>> when I try :
f>>>   mount -t msdos /dev/fd0 /mnt
f>>> my system displays :
f>>> msdosfs : /dev/fd0: No sush file or directory
f>>> I can say that there was no time whan this file existed
f>>> so i cannot mount floppy

f>>> Here is /var/run/dmesg.boot

f>>> Copyright (c) 1992-2003 The FreeBSD Project.
f>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
f>> 1993,
f>>> 1994
f>>>         The Regents of the University of California. All rights
f>>> reserved.
f>>> FreeBSD 5.1-RELEASE #0: Fri Jan 16 18:39:42 MSK 2004
f>>>     root@:/usr/src/sys/i386/compile/NovAD3a
f>>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc054a000.
f>>> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc054a26c.
f>>> Timecounter "i8254"  frequency 1193182 Hz
f>>> Timecounter "TSC"  frequency 1817949908 Hz
f>>> CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.95-MHz 686-class
f>> CPU)
f>>>   Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4

f>>>
f>>
f> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,
f>>> MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>

f>>> real memory  = 536805376 (511 MB)
f>>> avail memory = 515624960 (491 MB)
f>>> Pentium Pro MTRR support enabled
f>>> npx0: <math processor> on motherboard
f>>> npx0: INT 16 interface
f>>> acpi0: <AMIINT INTEL845> on motherboard
f>>> pcibios: BIOS version 2.10
f>>> Using $PIR table, 6 entries at 0xc00f78a0
f>>> acpi0: power button is handled as a fixed feature programming
f>> model.
f>>> Timecounter "ACPI-fast"  frequency 3579545 Hz
f>>>     ACPI-1287: *** Error: Method execution failed
f>> [\\_SB_.PCI0.MDET]
f>>> (Node 0xc150ec60), AE_AML_REGION_LIMIT
f>>>     ACPI-1287: *** Error: Method execution failed
f>> [\\_SB_.PCI0._CRS]
f>>> (Node 0xc150eba0), AE_AML_REGION_LIMIT
f>>>     ACPI-0175: *** Error: Method execution failed
f>> [\\_SB_.PCI0._CRS]
f>>> (Node 0xc150eba0), AE_AML_REGION_LIMIT
f>>> can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT
f>>>     ACPI-1287: *** Error: Method execution failed
f>> [\\_SB_.PCI0.MDET]
f>>> (Node 0xc150ec60), AE_AML_REGION_LIMIT
f>>>     ACPI-1287: *** Error: Method execution failed
f>> [\\_SB_.MEM_._CRS]
f>>> (Node 0xc4047960), AE_AML_REGION_LIMIT
f>>>     ACPI-0175: *** Error: Method execution failed
f>> [\\_SB_.MEM_._CRS]
f>>> (Node 0xc4047960), AE_AML_REGION_LIMIT
f>>> can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT
f>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on
f>> acpi0
f>>> acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
f>>> acpi_button0: <Power Button> on acpi0
f>>> pcib0: <ACPI Host-PCI bridge> on acpi0
f>>> pci0: <ACPI PCI bus> on pcib0
f>>> agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe7ffffff
f>> at
f>>> device 0.0 on pci0
f>>> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
f>>> pci1: <PCI bus> on pcib1
f>>> pci1: <display, VGA> at device 0.0 (no driver attached)
f>>> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
f>>> pci2: <ACPI PCI bus> on pcib2
f>>> pcm0: <Creative EMU10K1> port 0xc800-0xc81f irq 12 at device 3.0
f>> on
f>>> pci2
f>>> pcm0: <SigmaTel STAC9708/11 AC97 Codec>
f>>> pci2: <simple comms> at device 4.0 (no driver attached)
f>>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
f>>> isa0: <ISA bus> on isab0
f>>> atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f at
f>>> device 31.1 on pci0
f>>> ata0: at 0x1f0 irq 14 on atapci0
f>>> ata1: at 0x170 irq 15 on atapci0
f>>> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
f>>> 0xe800-0xe81f irq 12 at device 31.2 on pci0
f>>> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
f>>> usb0: USB revision 1.0
f>>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
f>>> uhub0: 2 ports with 2 removable, self powered
f>>> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
f>>> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
f>>> 0xec00-0xec1f irq 10 at device 31.4 on pci0
f>>> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
f>>> usb1: USB revision 1.0
f>>> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
f>>> uhub1: 2 ports with 2 removable, self powered
f>>> fdc0: cmd 3 failed at out byte 1 of 3
f>>> sio0 port 0x3f8-0x3ff irq 4 on acpi0
f>>> sio0: type 16550A
f>>> sio1 port 0x2f8-0x2ff irq 3 on acpi0
f>>> sio1: type 16550A
f>>> ppc0 port 0x378-0x37f irq 7 on acpi0
f>>> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
f>>> ppbus0: <Parallel port bus> on ppc0
f>>> plip0: <PLIP network interface> on ppbus0
f>>> lpt0: <Printer> on ppbus0
f>>> lpt0: Interrupt-driven port
f>>> ppi0: <Parallel I/O> on ppbus0
f>>> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on
f>> acpi0
f>>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
f>>> kbd0 at atkbd0
f>>> fdc0: cmd 3 failed at out byte 1 of 3
f>>> pmtimer0 on isa0
f>>> fdc0: cannot reserve I/O port range (6 ports)
f>>> pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 5 on isa0
f>>> pcic_attach: attach found no sockets
f>>> device_probe_and_attach: pcic0 attach returned 6
f>>> sc0: <System console> at flags 0x100 on isa0
f>>> sc0: VGA <16 virtual consoles, flags=0x300>
f>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
f> 0xa0000-0xbffff
f>> on
f>>> isa0
f>>> Timecounters tick every 10.000 msec
f>>> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently
f>>> 100.0%
f>>> ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
f>>> acd0: CD-RW <YAMAHA CRW3200E> at ata1-master PIO4
f>>> acd1: CDROM <ASUS CD-S500/A> at ata1-slave PIO4
f>>> Mounting root from ufs:/dev/ad0s3a

f>>> That's all.
f>>> P.S.
f>>> Thank you that you try to help me.

f>>> Sunday, January 18, 2004, 7:28:54 PM, you wrote:

f>>>> Hello friend
f>>>> Post the /var/run/dmesg.boot file in your next email, so I can
f>>> look
f>>>> for problems.
f>>>> Explain how you tested floppy drive using different operating
f>>>> systems.
f>>>> What hardware is in the PC?
f>>>> How old is the PC?
f>>>> Is it pre-Y2K?

f>>>> Is this an scsi floppy drive?


f>>>> Tell me what happens when you try this

f>>>> Login in as root user
f>>>> Put msdos formatted floppy disk in drive
f>>>> Issue this command
f>>>>      mount -t msdos /dev/fd0 /mnt
f>>>>      cd /mnt
f>>>>      ls
f>>>>      cd /root
f>>>>      umount /mnt





f>>>> -----Original Message-----
f>>>> From: owner-freebsd-questions@freebsd.org
f>>>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of
f> Алексей
f>>>> Дмитриевич
f>>>> Sent: Sunday, January 18, 2004 10:10 AM
f>>>> To: freebsd-questions@FreeBSD.ORG
f>>>> Subject: Problem with foppy drive

f>>>> Hello ,   Support
f>>>> I used my floppy just now in Ms Windows XP and it works.
f>>>> Also i used it in ASPlinux 7.2 and Linux Mandrake 9.1 (russian)
f>>>> and it worked very good.
f>>>> So what should i do. if it is possible please write as detailly
f>>> as
f>>>> possible because i know FreeBSD badly (i use it for about 3
f>>> weeks)




f>>>> This boot error message general means that your floppy drive is
f>>>> broken.
f>>>> When was the last time you used it?
f>>>> Try to verify that it's in working order by booting an
f> MS/Window
f>>>> system on that PC,
f>>>> or swap that floppy drive with one from some other PC that you
f>>> can
f>>>> test works first.

f>>>> -----Original Message-----
f>>>> From: owner-freebsd-questions@freebsd.org
f>>>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of
f> Алексей
f>>>> Дмитриевич
f>>>> Sent: Sunday, January 18, 2004 8:28 AM
f>>>> To: freebsd-questions@FreeBSD.ORG
f>>>> Subject: FreeBSD support

f>>>> Hello Support,
f>>>> I have a problem my floppy drive does not want to work.
f>>>> when my FreeBSD 5.1 boots I have a message
f>>>> fdc0: cmd 3 faild at out byte 1 of 3
f>>>> and
f>>>> cannot reserve I/O port range (6 port)

f>>>> After logining I cannot use my floppy drive- there is no device
f>>>> file.
f>>>> What should I do?



f>>>> --
f>>>> Best regards,
f>>>>  Alexey                          mailto:novad@newmail.ru

f>>>> _______________________________________________
f>>>> freebsd-questions@freebsd.org mailing list
f>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f>>>> To unsubscribe, send any mail to
f>>>> "freebsd-questions-unsubscribe@freebsd.org"

f>>>> __________


f>>>> --
f>>>> Best regards,
f>>>>  Алексей                          mailto:novad@newmail.ru

f>>>> _______________________________________________
f>>>> freebsd-questions@freebsd.org mailing list
f>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f>>>> To unsubscribe, send any mail to
f>>>> "freebsd-questions-unsubscribe@freebsd.org"

f>>>> __________

f>>>> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония,
f>>>> доступ в Интернет, хостинг), МТС, БИ Плюс




f>>> --
f>>> Best regards,
f>>>  Алексей                            mailto:novad@newmail.ru

f>>> _______________________________________________
f>>> freebsd-questions@freebsd.org mailing list
f>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f>>> To unsubscribe, send any mail to
f>>> "freebsd-questions-unsubscribe@freebsd.org"

f>>> __________

f>>> http://www.newhost.ru - Уютно, по-домашнему, в тапочках.....




f>> --
f>> Best regards,
f>>  Алексей                            mailto:novad@newmail.ru

f>> _______________________________________________
f>> freebsd-questions@freebsd.org mailing list
f>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f>> To unsubscribe, send any mail to
f>> "freebsd-questions-unsubscribe@freebsd.org"

f>> __________

f>> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония,
f>> доступ в Интернет, хостинг), МТС, БИ Плюс




f> --
f> Best regards,
f>  Алексей                            mailto:novad@newmail.ru

f> _______________________________________________
f> freebsd-questions@freebsd.org mailing list
f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f> To unsubscribe, send any mail to
f> "freebsd-questions-unsubscribe@freebsd.org"

f> __________

f> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония,
f> доступ в Интернет, хостинг), МТС, БИ Плюс




-- 
Best regards,
 Алексей                            mailto:novad@newmail.ru



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01192224.20040127171519>