Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 Dec 2004 17:43:18 -0800
From:      Derrick Ryalls <ryallsd@gmail.com>
To:        Alexandre Biancalana <biancalana@gmail.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: AMD Athlon XP 3200+ and reboots under load...
Message-ID:  <d5eb95fc041213174364345343@mail.gmail.com>
In-Reply-To: <8e10486b04121317247e6a200a@mail.gmail.com>
References:  <20041211033635.76518.qmail@web50709.mail.yahoo.com> <20041211232817.009aef2a@vixen42.24-119-122-191.cpe.cableone.net> <8e10486b0412131714140d69aa@mail.gmail.com> <61913.65.110.244.9.1102987165.squirrel@mail.pyrospheric.net> <8e10486b04121317247e6a200a@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
> On Mon, 13 Dec 2004 19:19:25 -0600 (CST), draconius
> <draconius@pyrospheric.net> wrote:
> > what are your temperatures inside the case? what kind of cooling / airflow
> > do you have in the case? I have had heat problems before due to bad
> > airflow in the case where all the hot air concentraded around the
> > processor(s)
> >
> > -drac
> 
> 
> >
> >
> > > I tested with FreeBSD 4.10 and 5.3. The same problem ocurs, when the
> > > the machine not reboot, varios coredumps in as/gcc hapens during make
> > > buildworld.
> > >
> > > Hardware:
> > >
> > > Asus A7V600-X
> > > AMD Sempron 2400+
> > > 512MB DDR 400
> > >
> > > any ideas ??
> > >

I think I am running AV7600 (no X), and when I was thinking about
upgrading the ram, I saw a note saying to check Asus' website to make
sure they have tested the ram first.  With lower speed ram, you can
probably run anything, but for the highest speed stuff, you should
check to make sure they work well with it.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d5eb95fc041213174364345343>