Date: Thu, 14 Aug 2014 12:19:06 +0200 From: TooMeeK Admin <maps@toomeek.waw.pl> To: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: U-boot for Banana Pi Message-ID: <53EC8D1A.2000005@toomeek.waw.pl> In-Reply-To: <CAGtf9xNPTW=VgMf69U28zArDfjzMxnMFkg3st-zufdMrB0UHoQ@mail.gmail.com> References: <53EB40BC.8070506@toomeek.waw.pl> <53EB41EC.1080507@toomeek.waw.pl> <D6453375-5427-406C-8399-ACBAE8E1DBBC@kientzle.com> <53EB8994.9080801@toomeek.waw.pl> <1407947691.56408.507.camel@revolution.hippie.lan> <53EBDA95.8000604@toomeek.waw.pl> <CAGtf9xNPTW=VgMf69U28zArDfjzMxnMFkg3st-zufdMrB0UHoQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I didn't touched std.a20 . Card is microSD with SD adapter, 1GB, real size about ~940MB, prepared this way: #1GB card is smaller, so ~940MB available truncate -s 920M banana.img mdconfig -f banana.img -u0 gpart create -s mbr md0 #NOTE: invalid partition type, unreadable by u-boot! #gpart add -s64m -t \!14 md0 gpart add -b 1m -s 64m -t '\!12' md0 gpart set -a active -i 1 md0 gpart add -t freebsd md0 newfs_msdos -F 16 /dev/md0s1 newfs /dev/md0s2 mount /dev/md0s2 /mnt cd /usr/src make TARGET_ARCH=armv6 DESTDIR=/mnt installworld distribution umount /mnt mount_msdosfs /dev/md0s1 /mnt cp /usr/obj/arm.armv6/usr/src/sys/BANANAPI/kernel /mnt echo "fatload mmc 0 0x43000000 script.bin; fatload mmc 0 0x48000000 kernel; go 0x48000100" > boot.cmd /usr/src/u-boot-sunxi/tools/mkimage -C none -A arm -T script -d boot.cmd boot.scr cp boot.scr /mnt mdconfig -d -u0 cd /root/banana dd if=/usr/src/u-boot-sunxi/u-boot-sunxi-with-spl.bin conv=notrunc of=banana.img bs=1024 seek=8 I've already tried: echo "fatload mmc 0 0x40200000 kernel; go 0x40200100" > boot.cmd, but one more time..: U-Boot 2014.04-10700-g4e19806 (Aug 13 2014 - 14:44:36) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Bananapi I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: dwmac.1c50000 Hit any key to stop autoboot: 2 1 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr 119 bytes read in 21 ms (4.9 KiB/s) Jumping to boot.scr ## Executing script at 44000000 reading kernel Error reading cluster ** Unable to read file kernel ** ## Starting application at 0x40200100 ... Maybe this is still invalid partition type? But if, why then boot.scr is loaded? Removed script.bin from the partition. I have no eEnv.txt, should I? Cheers, TooMeeK > boot,scr, script.bin, uEnv.txt etc are not really matters now. > script.bin is needed for linux, so you don't really need it. > I think boot.scr, uEnv etc are related to u-boot, so for now you can > leave them. > > I hope you have SD card and it is FAT formatted and you put there kernel. > You can try as I said before: > > fatload mmc 0 0x40200000 kernel; go 0x40200100 > > Because if you look /usr/src/sys/arm/allwinner/a20/std.a20 there are > lines that defines addresses like KERNPHYSADDR which is 0x40200000. > > Please try above command. I hope you didn't change anything in dts file. > > Ganbold > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53EC8D1A.2000005>