Date: Tue, 15 Aug 2017 20:59:48 +0300 From: Boris Samorodov <bsam@passap.ru> To: Yoshiro MIHIRA <sanpei.ml@gmail.com>, freebsd-arm@freebsd.org Subject: Re: boot.ini file for Odroid-C1 on FreeBSD wiki page Message-ID: <6706b32d-4278-d82c-92e6-069121cf48a2@passap.ru> In-Reply-To: <CALwmBx1Vv6_tZFtg7AzmJSBL4-HS8VzyncNo34HbBc_wJf66NQ@mail.gmail.com> References: <CALwmBx0zjVpUNK3oYjkzEVxxLkz3FqTOprS4quXvTv-Eu7fBVg@mail.gmail.com> <26c67e40-8b90-57f1-de32-e60d1cffe1b9@passap.ru> <CALwmBx1Vv6_tZFtg7AzmJSBL4-HS8VzyncNo34HbBc_wJf66NQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
15.08.2017 12:57, Yoshiro MIHIRA пишет: > Hi. > > Currently I could not test something with ODROID-C1(because I use it as my > parent's home VPN router). > > 1. add boot.ini and fix gpart block size > > I updated wiki page > https://wiki.freebsd.org/action/diff/FreeBSD/arm/Odroid-C1?action=diff&rev1=9&rev2=10 Great, thanks! > 2. growfs > > I think growfs command is for freebsd partition(mmcsd0s2). So growfs > /dev/mmcsd0s2? Ah, yes, sure. > 3. serial console is need to boot or not? That was just a quesion. I wanted to get a headless machine but didn't manage to boot Ocdoid-C1 without serial console. > Next September I will try to boot ODROID-C1 without serial console cable, > if I have a time. That would be interesting. Thank you. > 2017年8月7日(月) 6:19 Boris Samorodov <bsam@passap.ru>: >> 04.08.2017 09:15, Yoshiro MIHIRA пишет: >> >>> I will add boot.ini information to FreeBSD wiki page(1), if no one reply >> my >>> email until 10/Aug. >> >> That will be great. >> >> I have some more questions/fixes to "Steps to prepare SD card". >> >> 1. There are two commands: >> --- >> gpart add -t fat16 -b 1134 -s 64M mmcsd0 >> gpart add -t freebsd -b 132174 mmcsd0 >> --- >> >> I doubt the second command is precise. 64M is 131072 blocks, >> 131072 + 1134 = 132206. >> >> If I use those commands I get the error after the second one: >> --- >> gpart: autofill: No space left on device >> --- >> >> The value 132206 has a success. So the second command should be: >> --- >> gpart add -t freebsd -b 132206 mmcsd0 >> --- >> >> 2. Since we prepare the final disk, I'd add a growfs command at the >> end of those steps: >> --- >> growfs /dev/mmcsd0 >> --- >> >> HTH & WBR >> -- >> bsam >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6706b32d-4278-d82c-92e6-069121cf48a2>