Date: Thu, 23 Oct 1997 20:56:46 -0700 (PDT) From: Vincent Poy <vince@venus.GAIANET.NET> To: Doug White <dwhite@resnet.uoregon.edu> Cc: questions@FreeBSD.ORG Subject: Re: FreeBSD w/ 7 GIG Maxtor IDE HD Message-ID: <Pine.BSF.3.96.971023204735.2344A-100000@venus.GAIANET.NET> In-Reply-To: <Pine.BSF.3.96.971023111138.2937A-100000@gdi.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 23 Oct 1997, Doug White wrote: > On Thu, 23 Oct 1997, Vincent Poy wrote: > > > > > Today I attempted to install FreeBSD on a Maxtor 7 GIG EIDE Hard > > > > Drive but was unsuccessful. With the drive plugged in, FreeBSD probes the > > > > drive as 14475 cylinders, 8207 Heads, and 8255 Sectors per track while the > > > > drive and the BIOS has it as 14475 cylinders, 15 Heads, and 63 sectors per > > > > track. With the drive plugged in, the FreeBSD boot disk never made it to > > > > the sysinstall menu but just hung there until I booted without the drive > > > > attached. > > > > > > Hung where, exactly? Some systems have adverse effects to the terminal > > > init stuff in the dialog library and will jam there. My laptop happens to > > > be one of them. Try the new 2.2.5 install floppy, and don't worry too > > > much about the geometry as of yet. If you are dedicating the whole disk > > > to FreeBSD, it may help to put a DOS partition on the disk, then delete it > > > and install FreeBSD over it. This helps sysinstall get the geometry > > > right. > > > > The part where it hangs is during the boot disk probing, right > > after the probing, it's supposed to go to the sysinstall menu, instead, it > > just hangs there. > > So, what do you see on the screen when this locks up? I think I know > where this is, but i'd like to confirm. Nothing, it's right after probing and the sysinstall menu so the screen was a complete black. > > I've verified this with the 2.2.5-RELEASE floppy as > > well. The funny thing is the boot disk works fine with even a 9 GIG Fast > > Wide SCSI drive and smaller IDE drives except for this one. > > Is the IDE controller (wdc) and the disk probing properly? You can hit > Scroll-Lock and use the arrow keys to scroll back. Nope, the problem was it wasn't probing correctly. > > I tried dedicating a whole disk with FreeBSD but never made it that far. > > I ran /stand/sysinstall as well and normally it would ask me which > > drives I want to install FreeBSD on but instead, it just defaults to sd0 > > without giving me a choice. > > This sounds like the disk isn't probing properly. > > > As long as I can get to the sysinstall menu, I can type in the geometry > > for the drive but I can't. It seems like the drive itself is reporting > > the wrong info since it says Maxvor instead of Maxtor when probed. > > That's odd. I wonder if the firmware on your disk is corrupted or is > buggy. it was actually the cable of all things. > > I tried doing a dos partition but the largest partition fat16 supports > > is 2 gigs so it didn't really make a difference. I was just wondering > > if anyone out there got this Maxtor 7 gig or any of the 6.4 gig drives > > working. > > The problem with big disks is that after about 4 gigs, the access times > start hurting your performance. You can get better performance by using > two 4 gig disks, which allows you to overlay commands on each disk > (assuming you're using SCSI or one IDE controller per disk). It doesn't matter that much on performance since the drive is only for backup tarball's in case the main 9 gig SCSI wide drive fail but it works now. Cheers, Vince - vince@MCESTATE.COM - vince@GAIANET.NET ________ __ ____ Unix Networking Operations - FreeBSD-Real Unix for Free / / / / | / |[__ ] GaiaNet Corporation - M & C Estate / / / / | / | __] ] Beverly Hills, California USA 90210 / / / / / |/ / | __] ] HongKong Stars/Gravis UltraSound Mailing Lists Admin /_/_/_/_/|___/|_|[____]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971023204735.2344A-100000>