Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 28 May 1998 16:59:26 -0300 (ADT)
From:      Antonio Bemfica <bemfica@militzer.me.tuns.ca>
To:        Doug White <dwhite@resnet.uoregon.edu>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: 2940AU SCSI timeout problem - how come kernel.GENERIC works
Message-ID:  <Pine.BSF.3.96.980528165426.22302A-100000@militzer.me.tuns.ca>
In-Reply-To: <Pine.BSF.3.96.980528110128.2373Q-100000@gdi.uoregon.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 28 May 1998, Doug White wrote:

> You must have enabled something odd.  What changes did you make in your
> config file?

Here goes the kernel config file - maybe someone can spot the mistake...
I would be very thankful.

Antonio

------------------------------------------------------------------------

machine		"i386"
ident		MECH-GENERIC
maxusers	32
options		CHILD_MAX=256
options		OPEN_MAX=256
options		"MAXDSIZ=(256*1024*1024)"
options		"DFLDSIZ=(256*1024*1024)"
options		FAILSAFE
options         INCLUDE_CONFIG_FILE     # Include this file in kernel
config		kernel	root on sd0 
cpu		"I486_CPU"
cpu		"I586_CPU"
cpu		"I686_CPU"		# aka Pentium Pro(tm)
options		"CPU_FASTER_5X86_FPU"
options		"CPU_SUSP_HLT"
options		"COMPAT_43"
options		USER_LDT		#allow user-level control of i386 ldt
options		SYSVSHM
options		SYSVSEM
options		SYSVMSG
options		"MD5"
options		DDB_UNATTENDED
options		KTRACE			#kernel tracing
options		PERFMON
options		UCONSOLE
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor
options		INET			#Internet communications protocols
pseudo-device	ether			#Generic Ethernet
pseudo-device	loop			#Network loopback device
pseudo-device	sl	6               #Serial Line IP
pseudo-device   bpfilter	6       #Berkeley packet filter
pseudo-device	tun	6		#Tunnel driver(user process ppp)
options         MROUTING 
options		ARP_PROXYALL		# global proxy ARP
options		FFS			#Fast filesystem
options		NFS			#Network File System
options         NQNFS                   #Enable NQNFS lease checking
options		"CD9660"		#ISO 9660 filesystem
options		KERNFS			#Kernel filesystem
options         MSDOSFS                 #MS DOS File System
options		PROCFS			#Process filesystem
options		UNION			#Union filesystem
options		QUOTA			#enable disk quotas
controller	scbus0	#base SCSI code
device		sd0	#SCSI disks
device		sd1	#SCSI disks
device          st0     #SCSI tapes
device		cd0	#SCSI CD-ROMs
options         SCSI_REPORT_GEOMETRY
pseudo-device	pty	32	#Pseudo ttys - can go as high as 256
pseudo-device	speaker		#Play IBM BASIC-style noises out your speaker
pseudo-device	log		#Kernel syslog interface (/dev/klog)
pseudo-device	gzip		#Exec gzipped a.out's
pseudo-device	vn		#Vnode driver (turns a file into a device)
pseudo-device	snp	6	#Snoop device - to look at pty/vty/etc..
controller	isa0
options		"AUTO_EOI_1"
options		"AUTO_EOI_2"
options		BOUNCE_BUFFERS
options		"TUNE_1542"
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
options		MAXCONS=16		# number of virtual consoles
device		npx0	at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr
controller      aha0    at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1
controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1
options         "CMD640"	#Enable work around for CMD640 h/w bug
controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
options	FDSEEKWAIT=32
device		lpt0	at isa? port? tty irq 7 vector lptintr
device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
options "COM_MULTIPORT"
device		sio2	at isa?	port 0x380 tty flags 0x505
device		sio3	at isa?	port 0x388 tty flags 0x505
device		sio4	at isa?	port 0x390 tty flags 0x505
device		sio5	at isa?	port 0x398 tty flags 0x505 irq 5 vector siointr
device ed1 at isa? port 0x300 net irq 14 iomem 0xd8000 vector edintr
device pca0 at isa? port IO_TIMER1 tty
controller      snd0
controller	pci0
controller	ahc0
controller      ncr0
controller	pnp0
device          vx0
options         COMPAT_LINUX
options         SCSI_DELAY=16    # Be pessimistic about Joe SCSI device


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980528165426.22302A-100000>