Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 21 Jun 2002 14:39:08 -0700
From:      Alfred Perlstein <bright@mu.org>
To:        Matthew Jacob <mjacob@feral.com>
Cc:        scsi@freebsd.org
Subject:   Re: ISP driver issues in 4.6-RELEASE?
Message-ID:  <20020621213908.GA37053@elvis.mu.org>
In-Reply-To: <Pine.BSF.4.21.0206211425240.44762-100000@beppo>
References:  <20020621191102.GB97912@elvis.mu.org> <Pine.BSF.4.21.0206211425240.44762-100000@beppo>

next in thread | previous in thread | raw e-mail | index | archive | help
* Matthew Jacob <mjacob@feral.com> [020621 14:26] wrote:
> 
> Are you loading firmware, i.e., have
> 
> 	device ispfw
> 
> or
> 
> ispfw_LOAD=YES

This is on the 4.6 boot floppy... looking at 4.6's generic it
doesn't look like it has that in it, so probably not.

> 
> ?
> 
> I could use a bit more information than what you have also. I'd be surprised
> that even under -v that's all the information there is. How about the whole
> dmesg? 

oy, I'll try to get the ispfw module onto the boot floppy and get
you the full dmesg.  And yes, that seems to be all I see under '-v'
but I'll double check.

> Are you booting w/o any devices connected at all?

Without devices attached the isp card probes and we continue to
boot.  It just can not finish the probe if the external raid is
hooked up.

> 
> -matt
> 
> 
> On Fri, 21 Jun 2002, Alfred Perlstein wrote:
> 
> > Hi, we've got an "infotrends IDE RAID" system here, it seems we've
> > got an abundance of ISP FC-AL based cards here, none of which FreeBSD
> > will boot past probing with when the device is attached to it.
> > 
> > Looks something like this (under boot -v):
> > 
> > Qlogic ISP Driver, FreeBSD Version 4.16, Core Version 2.6
> > Qlogic ISP 2100 PCI FC-AL Adapter
> > isp0: using I/O space register mapping
> >   shared irq 11
> > 
> > 
> > Sorry for not taking down the io space and such.
> > 
> > So I'm wondering if there's any suggestions as to things I can do
> > with this card to get it to boot or at least output some more helpful
> > info?
> > 
> > thanks,
> > -- 
> > -Alfred Perlstein [alfred@freebsd.org]
> > 'Instead of asking why a piece of software is using "1970s technology,"
> >  start asking why software is ignoring 30 years of accumulated wisdom.'
> > Tax deductible donations for FreeBSD: http://www.freebsdfoundation.org/
> > 

-- 
-Alfred Perlstein [alfred@freebsd.org]
'Instead of asking why a piece of software is using "1970s technology,"
 start asking why software is ignoring 30 years of accumulated wisdom.'
Tax deductible donations for FreeBSD: http://www.freebsdfoundation.org/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020621213908.GA37053>