Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 17 Jan 2013 10:58:07 +0200
From:      Daniel Braniss <danny@cs.huji.ac.il>
To:        "Ronald Klop" <ronald-freebsd8@klop.yi.org>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: time issues and some more
Message-ID:  <E1TvlIV-00013s-Rz@kabab.cs.huji.ac.il>
In-Reply-To: <op.wq0mrtuy8527sy@212-182-167-131.ip.telfort.nl>
References:  <E1TvPZ7-000NC7-5C@kabab.cs.huji.ac.il>  <op.wq0mrtuy8527sy@212-182-167-131.ip.telfort.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
> On Wed, 16 Jan 2013 10:45:49 +0100, Daniel Braniss <danny@cs.huji.ac.il>  
> wrote:
> 
> > I resently upgraded a Dell PowerEdge R710, to 9.1-stable, we mainly use  
> > it as
> > a backup to several zfs servers (doing send|receive) without major  
> > issues till
> > the upgrade, it was running 8.2-stable.
> >
> > now, we see that sometime the time drifts, and today I noticed that it  
> > was
> > hung, and once I got unto the ipmi console this is what i got:
> > [SOL Session operational.  Use ~? for help]
> > swap_pager: indefinite wait buffer: bufobj: 0, blkno: 3864, size: 12288
> >
> > and things started moving again,
> >
> > in /var/log/messages:
> > Jan 16 03:27:35 store-02 kernel: swap_pager: indefinite wait buffer:  
> > bufobj:
> > 0, blkno: 3864, size: 12288
> >
> > but the REAL time is 7hs ahead!, so time stood still ?
> > and now, of course we get:
> > Jan 16 03:54:19 store-02 ntpd[38163]: time correction of 25216 seconds  
> > exceeds
> > sanity limit (1000); set clock manually to the correct UTC time.
> >
> > I will now reboot, and try a newer kernel and check, but any insight will
> > be very helpful,
> >
> > thanks,
> > 	danny
> 
> Does BSD 9 choose another timer source than BSD 8?
> Use sysctl to check these values at your system.
> kern.eventtimer.choice: LAPIC(400) i8254(100) RTC(0)
> kern.eventtimer.timer: LAPIC
> 
> Or this ones. I always confuse these.
> kern.timecounter.choice: TSC-low(1000) ACPI-fast(900) i8254(0)  
> dummy(-1000000)
> kern.timecounter.hardware: TSC-low
> 

under 8.3 it's kern.timecounte, so this is what I get:

> sysctl kern.timecounter
kern.timecounter.tick: 1
kern.timecounter.choice: TSC(-100) HPET(900) ACPI-fast(1000) i8254(0) 
dummy(-1000000)
kern.timecounter.hardware: ACPI-fast
kern.timecounter.stepwarnings: 0
kern.timecounter.tc.i8254.mask: 65535
kern.timecounter.tc.i8254.counter: 52515
kern.timecounter.tc.i8254.frequency: 1193182
kern.timecounter.tc.i8254.quality: 0
kern.timecounter.tc.ACPI-fast.mask: 16777215
kern.timecounter.tc.ACPI-fast.counter: 925448
kern.timecounter.tc.ACPI-fast.frequency: 3579545
kern.timecounter.tc.ACPI-fast.quality: 1000
kern.timecounter.tc.HPET.mask: 4294967295
kern.timecounter.tc.HPET.counter: 1472869277
kern.timecounter.tc.HPET.frequency: 14318180
kern.timecounter.tc.HPET.quality: 900
kern.timecounter.tc.TSC.mask: 4294967295
kern.timecounter.tc.TSC.counter: 4125922088
kern.timecounter.tc.TSC.frequency: 2329838875
kern.timecounter.tc.TSC.quality: -100
kern.timecounter.smp_tsc: 0
kern.timecounter.invariant_tsc: 1

so I assume the choise is HPET, under 9.1:
kern.eventtimer.timer: HPET

so it seems to be the same.

btw, this morning I see that it's behind more than 1 hour, and no signs of
ntpd!

the logs show:
...
Jan 17 00:40:52 store-02 kernel: usb_dev_suspend_peer: Setting device remote 
wakeup failed
Jan 17 01:05:46 store-02 ntpd[1845]: time correction of 7854 seconds exceeds 
sanity limit (1000); set clock manually to the correct UTC time.
...

it seems to me that the 7854 seconds is exactly the time diff:
date on this hosts says:
Thu Jan 17 08:46:18 IST 2013


addig the 7854 sec is the current(almost) real date:
Thu Jan 17 10:57:13 IST 2013

something is very fishy here.

cheers,

	danny






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1TvlIV-00013s-Rz>