Date: Fri, 3 Jan 2003 13:47:39 -0500 From: "Ken Menzel" <kenm@icarz.com> To: <freebsd-scsi@freebsd.org> Subject: Adaptec 3200 on FreeBSD current Message-ID: <001401c2b358$97a7dd90$ecdb7bd1@kenxp>
next in thread | raw e-mail | index | archive | help
Hi, I have this controller on on DELL 2400 Dual PIII: asr0: <Adaptec Caching SCSI RAID> mem 0xf0000000-0xf7ffffff irq 11 at device 8.1 on pci3 asr0: major=154 asr0: ADAPTEC 3200S FW Rev. 370F, 2 channel, 256 CCBs, Protocol I2O FreeBSD 5 RC2 sees the controller just like above. It is running FReeBSD 4.7 but on FreeBSD 5 RC2 (or RC1) The install CD says I have no drive to install to! Does anyone have any ideas on what I should look at to make the devices visible to FBSD 5 or debug this problem? Am I doing something wrong on FBSD5? I can boot the fixit disk on FBSD5 and dmesg shows sa0 and ch0 but NOT da0 This is the device list from 4.7: sa0 at asr0 bus 1 target 6 lun 0 sa0: <SONY TSL-11000 L0u6> Removable Sequential Access SCSI-2 device pass1 at asr0 bus 0 target 6 lun 0 pass1: <DELL 1x6 U2W SCSI BP 1.29> Fixed Processor SCSI-2 device da0 at asr0 bus 0 target 0 lun 0 da0: <ADAPTEC RAID-10 370F> Fixed Direct Access SCSI-2 device da0: Tagged Queueing Enabled da0: 210021MB (430123008 512 byte sectors: 255H 63S/T 26773C) ch0 at asr0 bus 1 target 6 lun 1 ch0: <SONY TSL-11000 L0u6> Removable Changer SCSI-2 device ch0: 8 slots, 1 drive, 1 picker, 0 portals Mounting root from ufs:/dev/da0s1a Thanks Ken ----------------------------------------------------- Ken Menzel ICQ# 9325188 www.icarz.com kenm@icarz.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001401c2b358$97a7dd90$ecdb7bd1>