Date: Mon, 27 May 2002 16:16:01 +0200 From: "Arvid Elstrodt" <arvid@elstrodt.com> To: <hm@kts.org> Cc: "Gary Jennejohn" <garyj@jennejohn.org>, <freebsd-isdn@FreeBSD.ORG> Subject: Re: FreeBSD 4.6 RC2, Dynalink IS64PH ISA PnP card: "Can't assign resources" ?? Message-ID: <001501c20589$08da5520$0102211f@ENMCARVID> References: <20020527134706.43A5F549C@bert.kts.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message ----- From: "Hellmuth Michaelis" <hm@kts.org> To: "Arvid Elstrodt" <arvid@elstrodt.com> Cc: "Gary Jennejohn" <garyj@jennejohn.org>; <freebsd-isdn@FreeBSD.ORG> Sent: Monday, May 27, 2002 3:47 PM Subject: Re: FreeBSD 4.6 RC2, Dynalink IS64PH ISA PnP card: "Can't assign resources" ?? > Arvid Elstrodt wrote: > > > The two biggest chips on the card are both from Siemens, and they read: > > > > SIEMENS PSB 21525 N HSCX TE V2.1 GERMANY 748 > > SIEMENS PSP 2186N V1.1 ISAC-S TE GERMANY 9750L > > > > I have read through LINT and found that I *should* use following two lines > > in the kernel config: > > > > options DYNALINK > > device iwic > > You need "device isic" for this chipset. > > > for FreeBSD: options ASUSCOM_IPAC device isic0 > > This is not applicable for this chipset. > > In case you still do not get your card being recognized, please let me > see the output of running pnpinfo on this machine. > > hellmuth Hi, I was just going to start a "make" with the information that Gary provided, but I will try yours first (no offense meant Gary). Just to check before my machine is busy for the next hours, this is what I have in my config now: # ISDN Suppport device isic pseudo-device "i4bq921" pseudo-device "i4bq931" pseudo-device "i4b" pseudo-device "i4btrc" 4 pseudo-device "i4bctl" pseudo-device "i4brbch" 4 pseudo-device "i4btel" 4 pseudo-device "i4bipr" 4 pseudo-device "i4bisppp" 4 options IPR_VJ options IPR_LOG=5 Can you please confirm that this is correct ? If so, I will start building right away ! Regards, Arvid PS: I have been in Hamburg quite a lot when I had a job as a sales engineer, nice city ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001501c20589$08da5520$0102211f>