Date: Mon, 29 Aug 2005 19:28:03 +0200 From: Stefan Bethke <stb@lassitu.de> To: freebsd-current@freebsd.org Cc: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@DeepCore.dk> Subject: Re: Boot off CF card hangs at "Trying to mount root" Message-ID: <0046E5C3-22EE-4F5D-B2B0-DFF4F0157F6B@lassitu.de> In-Reply-To: <3923443F-6926-4BB7-8681-40FC68A41B79@lassitu.de> References: <7A0B19EC-2F90-495F-B242-7FB701C32908@lassitu.de> <20050828124321.43365136@Magellan.Leidinger.net> <F386A392-B3E9-43E1-BEEF-7B8467AB2E3F@lassitu.de> <3923443F-6926-4BB7-8681-40FC68A41B79@lassitu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail-4-1000395906
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
delsp=yes;
format=flowed
Am 28.08.2005 um 18:46 schrieb Stefan Bethke:
> Compiling boot, loader, and kernel without a CPUTYPE setting fixed
> the boot and loader issues; however, the kernel doesn't seem to be
> happy with the CF card:
>
> ad3: 489MB <LEXAR ATA FLASH 1.01> at ata1-slave PIO4
> Trying to mount root from ufs:/dev/ad3s1a
>
> Again, I can break into the debugger, but I'm not certain what I
> should be looking at.
OK brought home a couple of useful things; I can now run both the HD
and the CF card at the same time, and I have a serial console.
Booting into 5-stable from the HD let's me access the CF card just
fine. I've attached a verbose boot from both 5-stable and 6-beta3.
The most striking difference (to me) is that 5-stable thinks DMA66 is
fine (and my tests show that at least reading is not a problem at
all), while 6-beta wants to do PIO4, but seemingly gets stuck.
Time to add debugging to ata?
Just to make sure I didn't mess up the kernel config, I'll try with
GENERIC.
Thanks,
Stefan
--Apple-Mail-4-1000395906
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
x-unix-mode=0644;
name="dmesg-5.txt"
Content-Disposition: attachment;
filename=dmesg-5.txt
FreeBSD/i386 (diesel.lassitu.de) (ttyd0)
login: Console: serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS 640kB/515008kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(root@diesel.lassitu.de, Sat Jun 4 12:21:42 CEST 2005)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x2d781c data=0x32cc0+0x35940 syms=[0x4+0x42fd0+0x4+0x55559]
/boot/kernel/snd_via82c686.ko text=0x235c data=0x26c syms=[0x4+0x850+0x4+0x8a3]
loading required module 'sound'
/boot/kernel/sound.ko text=0x13848 data=0x279c+0x10cc syms=[0x4+0x2bc0+0x4+0x30c9]
/boot/kernel/mem.ko text=0x24f8 data=0x244+0x24 syms=[0x4+0x790+0x4+0x6e3]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -vs
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000001f6f0000
SMAP type=03 base=000000001f7f3000 len=000000000000d000
SMAP type=04 base=000000001f7f0000 len=0000000000003000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #2: Sat Jun 4 15:51:17 CEST 2005
root@diesel.lassitu.de:/usr/obj/usr/src/sys/DIESEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0803000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc08031d8.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc080328c.
Preloaded elf module "/boot/kernel/mem.ko" at 0xc0803338.
Calibrating clock(s) ... i8254 clock: 1193099 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 532639770 Hz
CPU: VIA C3 Samuel 2 (532.64-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x673 Stepping = 3
Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
real memory = 528416768 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001eee3fff, 506195968 bytes (123583 pages)
avail memory = 507424768 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb090
bios32: Entry = 0xfb500 (c00fb500) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb530
pnpbios: Found PnP BIOS data at 0xc00fbfd0
pnpbios: Entry = f0000:c000 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
acpi0: <VIA601 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fde40
PCI-Only Interrupts: 5 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer: 0/6 0/4 0/5 0/4 0/5 0/4 0/5 0/4 0/5 0/5 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.8.0
\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.8.1
\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.8.2
\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.8.3
\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.9.0
\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.9.1
\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.9.2
\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.9.3
\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.6.0
\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.6.1
\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.6.2
\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.6.3
\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.11.0
\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.11.1
\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.11.2
\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.11.3
\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.7.0
\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.7.1
\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.7.2
\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.7.3
\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.1.0
\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.1.1
\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+ low,level,sharable 0.1.2
\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0601, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2290, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8601, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
map[14]: type 4, range 32, base 0000d000, size 2, enabled
map[18]: type 4, range 32, base 0000d400, size 2, enabled
pcib0: matched entry for 0.7.INTC (src \_SB_.PCI0.LNKD)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKA (references 6, priority 124194):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 240 240 290 5240 5240 5240 5240 5240 50240 50240100240
\_SB_.PCI0.LNKB (references 6, priority 124194):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 240 240 290 5240 5240 5240 5240 5240 50240 50240100240
\_SB_.PCI0.LNKC (references 6, priority 124194):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 240 240 290 5240 5240 5240 5240 5240 50240 50240100240
\_SB_.PCI0.LNKD (references 6, priority 124194):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 240 240 290 5240 5240 5240 5240 5240 50240 50240100240
pcib0: slot 7 INTC routed to irq 11 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3058, revid=0x50
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 1, range 32, base e5810000, size 8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKA (references 6, priority 125667):
interrupts: 10 5 11 12 7 6 4 3 15 14 1
penalty: 480 530 540 5480 5480 5480 5480 5480 50480 50480100480
\_SB_.PCI0.LNKB (references 6, priority 125667):
interrupts: 10 5 11 12 7 6 4 3 15 14 1
penalty: 480 530 540 5480 5480 5480 5480 5480 50480 50480100480
\_SB_.PCI0.LNKC (references 6, priority 125667):
interrupts: 10 5 11 12 7 6 4 3 15 14 1
penalty: 480 530 540 5480 5480 5480 5480 5480 50480 50480100480
pcib0: slot 8 INTA routed to irq 12 via \_SB_.PCI0.LNKA
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base e5811000, size 8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 6, priority 127140):
interrupts: 10 5 11 7 6 4 3 12 15 14 1
penalty: 720 770 780 5720 5720 5720 5720 5780 50720 50720100720
\_SB_.PCI0.LNKC (references 6, priority 127140):
interrupts: 10 5 11 7 6 4 3 12 15 14 1
penalty: 720 770 780 5720 5720 5720 5720 5780 50720 50720100720
pcib0: slot 9 INTA routed to irq 10 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 1, range 32, base e5812000, size 8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD)
pcib0: slot 11 INTA is already routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe4000000-0xe57fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base e4000000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xe4000000-0xe47fffff
map[14]: type 1, range 32, base e5000000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xe5000000-0xe501ffff
map[18]: type 1, range 32, base e4800000, size 23, enabled
pcib1: device (null) requested decoded memory range 0xe4800000-0xe4ffffff
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is already routed to irq 12
pcib1: slot 0 INTA is routed to irq 12
found-> vendor=0x1023, dev=0x8500, revid=0x6a
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=01 ostat0=50 ostat1=ff
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
pcib0: matched entry for 0.7.INTD (src \_SB_.PCI0.LNKA)
pcib0: slot 7 INTD is already routed to irq 12
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f at device 7.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
pcib0: matched entry for 0.7.INTD (src \_SB_.PCI0.LNKA)
pcib0: slot 7 INTD is already routed to irq 12
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 11 at device 7.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xcc00
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC200 AC97 Codec (id = 0x414c4710)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 21d000, 1000; 0xc1669000 -> 21d000
pcm0: sndbuf_setmap 25f000, 1000; 0xc166b000 -> 25f000
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xe5810000-0xe58100ff irq 12 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:f4:67:ec:84
rl0: [MPSAFE]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
rl1: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xe5811000-0xe58110ff irq 10 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:f4:67:ec:83
rl1: [MPSAFE]
rl2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
rl2: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe5812000-0xe58120ff irq 11 at device 11.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:f4:67:ec:82
rl2: [MPSAFE]
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 532639770 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging disabled
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on VIA 82C686B chip
ata0-master: setting UDMA66 on VIA 82C686B chip
ad0: <IBM-DJSA-210/JS2AABAA> ATA-5 disk at ata0-master
ad0: 9590MB (19640880 sectors), 19485 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0xffffffff udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on VIA 82C686B chip
ata1-master: setting PIO4 on VIA 82C686B chip
ad2: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR> error=4<ABORTED>
ad2: FAILURE - SETFEATURES ENABLE WCACHE status=51<READY,DSC,ERROR> error=4<ABORTED>
ad2: <LEXAR ATA FLASH/V1.01> ATA-0 disk at ata1-master
ad2: 489MB (1001952 sectors), 994 C, 16 H, 63 S, 512 B
ad2: 1 secs/int, 1 depth queue, PIO4
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19640817
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10056098304 end 10056130559
GEOM: new disk ad2
GEOM: Configure ad0s1a, start 536870912 length 9519227392 end 10056098303
GEOM: Configure ad0s1b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1c, start 0 length 10056098304 end 10056098303
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):488/63/32 s:32 l:1001440
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 16384 length 512737280 end 512753663
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad2s1a, start 8192 length 512729088 end 512737279
GEOM: Configure ad2s1c, start 0 length 512737280 end 512737279
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:
# dd if=/dev/ad2s1a of=/dev/null bs=64k count=64
64+0 records in
64+0 records out
4194304 bytes transferred in 0.708893 secs (5916695 bytes/sec)
--Apple-Mail-4-1000395906
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
x-unix-mode=0644;
name="dmesg-6.txt"
Content-Disposition: attachment;
filename=dmesg-6.txt
OK boot -vs
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000001f6f0000
SMAP type=03 base=000000001f7f3000 len=000000000000d000
SMAP type=04 base=000000001f7f0000 len=0000000000003000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA3 #5: Sun Aug 28 17:43:50 CEST 2005
root@little:/usr/obj/usr/src/sys/LITTLE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b8000.
Preloaded elf module "/boot/modules/agp.ko" at 0xc06b81d8.
Preloaded elf module "/boot/modules/io.ko" at 0xc06b8284.
Preloaded elf module "/boot/modules/mem.ko" at 0xc06b832c.
Preloaded elf module "/boot/modules/random.ko" at 0xc06b83d8.
module agp already present!
Calibrating clock(s) ... i8254 clock: 1193103 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 532639997 Hz
CPU: VIA C3 Samuel 2 (532.64-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x673 Stepping = 3
Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
real memory = 528416768 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000001eedbfff, 510357504 bytes (124599 pages)
avail memory = 511975424 (488 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb090
bios32: Entry = 0xfb500 (c00fb500) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb530
pnpbios: Found PnP BIOS data at 0xc00fbfd0
pnpbios: Entry = f0000:c000 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
io: <I/O>
mem: <memory>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fde40
PCI-Only Interrupts: 5 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 6 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 7 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x1 255 N 6 3 4 5 7 9 10 11 12 14 15
0x2 255 N 6 3 4 5 7 9 10 11 12 14 15
0x3 255 N 7 3 4 5 7 9 10 11 12 14 15
0x5 255 N 7 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.8.INTA at func 0: 12
$PIR: Found matching pin for 0.9.INTA at func 0: 10
$PIR: Found matching pin for 0.11.INTA at func 0: 11
$PIR: Found matching pin for 0.7.INTC at func 5: 5
$PIR: BIOS IRQ 5 for 0.7.INTC does not match link 0x5 irq 11
$PIR: Found matching pin for 0.7.INTD at func 2: 255
$PIR: Found matching pin for 0.7.INTD at func 3: 255
$PIR: Found matching pin for 0.7.INTC at func 5: 5
$PIR: Found matching pin for 0.7.INTD at func 2: 255
$PIR: Found matching pin for 0.7.INTD at func 3: 255
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x1 12 Y 6 3 4 5 7 9 10 11 12 14 15
0x2 10 Y 6 3 4 5 7 9 10 11 12 14 15
0x3 5 Y 7 3 4 5 7 9 10 11 12 14 15
0x5 11 Y 7 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 10 11 12
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 7 0 0 0 0 6 7 6 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0601, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2290, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x8601, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c000, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c800, size 5, enabled
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3058, revid=0x50
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
map[14]: type 4, range 32, base 0000d000, size 2, enabled
map[18]: type 4, range 32, base 0000d400, size 2, enabled
$PIR: 0:7 INTC routed to irq 5
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 1, range 32, base e5810000, size 8, enabled
$PIR: 0:8 INTA routed to irq 12
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 1, range 32, base e5811000, size 8, enabled
$PIR: 0:9 INTA routed to irq 10
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 1, range 32, base e5812000, size 8, enabled
$PIR: 0:11 INTA routed to irq 11
agp0: <VIA 8601 (Apollo ProMedia/PLE133Ta) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe4000000-0xe57fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1023, dev=0x8500, revid=0x6a
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4000000, size 23, enabled
pcib1: (null) requested memory range 0xe4000000-0xe47fffff: good
map[14]: type 1, range 32, base e5000000, size 17, enabled
pcib1: (null) requested memory range 0xe5000000-0xe501ffff: good
map[18]: type 1, range 32, base e4800000, size 23, enabled
pcib1: (null) requested memory range 0xe4800000-0xe4ffffff: good
$PIR: 0:1 INTA routed to irq 12
pcib1: slot 0 INTA is routed to irq 12
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=01 ostat0=50 ostat1=ff
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0:7:2: Transition from D0 to D3
pci0: <serial bus, USB> at device 7.3 (no driver attached)
pci0:7:3: Transition from D0 to D3
pci0: <bridge> at device 7.4 (no driver attached)
pci0:7:4: Transition from D0 to D3
pci0: <multimedia, audio> at device 7.5 (no driver attached)
pci0:7:5: Transition from D0 to D3
pci0: <network, ethernet> at device 8.0 (no driver attached)
pci0:8:0: Transition from D0 to D3
pci0: <network, ethernet> at device 9.0 (no driver attached)
pci0:9:0: Transition from D0 to D3
pci0: <network, ethernet> at device 11.0 (no driver attached)
pci0:11:0: Transition from D0 to D3
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 14 devices, largest 69 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xcc000-0xcffff, size=0x4000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x4000-0x407f, size=0x80, align=0
PNP0a03: adding io range 0x4080-0x40ff, size=0x80, align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0
PNP0a03: adding io range 0x6000-0x607f, size=0x80, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xf0000-0xf3fff,0xf4000-0xf7fff,0xf8000-0xfffff,0xcc000-0xcffff on isa0
unknown: <PNP0700> failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0400> failed to probe at port 0x378-0x37f irq 7 on isa0
Device configuration finished.
Timecounter "TSC" frequency 532639997 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ad0: setting PIO4 on VIA 82C686B chip
ad0: setting UDMA66 on VIA 82C686B chip
ad0: 9590MB <IBM DJSA-210 JS2AABAA> at ata0-master UDMA66
ad0: 19640880 sectors [19485C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=BIOSDMA udma=BIOSDMA cable=40 wire
ad2: setting PIO4 on VIA 82C686B chip
ad2: 489MB <LEXAR ATA FLASH V1.01> at ata1-master PIO4
ad2: 1001952 sectors [994C/16H/63S] 1 sectors/interrupt 1 depth queue
GEOM: new disk ad2
Trying to mount root from ufs:/dev/ad3s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disstray irq7
k boot devices
<empty line> Abort manual input
mountroot> ufsV:
Trying to mount root from ufs:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/ad2s1a
Trying to mount root from ufs:/dev/ad2s1a
start_init: trying /sbin/init
KDB: enter: manual escape to debstray irq7
ugger
[thread pid 13 tid 100003 ]
Stopped at kdb_enter+0x2b: nop
db> ps
pid proc uid ppid pgrp flag stat wmesg wchan cmd
39 c12ef000 0 0 0 0000204 [SLPQ - 0xd4c87d08][SLP] schedcpu
38 c11c7c48 0 0 0 0000204 [SLPQ vlruwt 0xc11c7c48][SLP] vnlru
37 c120c000 0 0 0 0000204 [SLPQ syncer 0xc06079fc][SLP] syncer
36 c120c20c 0 0 0 0000204 [SLPQ psleep 0xc060cb2c][SLP] bufdaemon
9 c120c418 0 0 0 000020c [RUNQ] pagezero
8 c120c624 0 0 0 0000204 [SLPQ psleep 0xc060fdb4][SLP] vmdaemon
7 c120c830 0 0 0 0000204 [SLPQ psleep 0xc060fd70][SLP] pagedaemon
35 c120ca3c 0 0 0 0000204 [IWAIT] swi0: sio
34 c120cc48 0 0 0 0000204 [IWAIT] swi6:+
33 c120d000 0 0 0 0000204 [IWAIT] swi6: task queue
32 c120d20c 0 0 0 0000204 [IWAIT] swi2: cambio
6 c120d418 0 0 0 0000204 [SLPQ - 0xc1184e00][SLP] kqueue taskq
31 c11bf624 0 0 0 0000204 [IWAIT] swi5:+
5 c11bf830 0 0 0 0000204 [SLPQ - 0xc11d3080][SLP] thread taskq
30 c11bfa3c 0 0 0 0000204 [SLPQ - 0xc06b45e0][SLP] yarrow
4 c11bfc48 0 0 0 0000204 [SLPQ - 0xc06051a8][SLP] g_down
3 c11c7000 0 0 0 0000204 [SLPQ - 0xc06051a4][SLP] g_up
2 c11c720c 0 0 0 0000204 [SLPQ - 0xc060519c][SLP] g_event
29 c11c7418 0 0 0 0000204 [IWAIT] swi3: vm
28 c11c7624 0 0 0 000020c [RUNQ] swi4: clock sio
27 c11c7830 0 0 0 0000204 [IWAIT] swi1: net
26 c11c7a3c 0 0 0 0000204 [IWAIT] irq15: ata1
25 c118b20c 0 0 0 0000204 [IWAIT] irq14: ata0
24 c118b418 0 0 0 0000204 [IWAIT] irq13:
23 c118b624 0 0 0 0000204 [IWAIT] irq12:
22 c118b830 0 0 0 0000204 [IWAIT] irq11:
21 c118ba3c 0 0 0 0000204 [IWAIT] irq10:
20 c118bc48 0 0 0 0000204 [IWAIT] irq9:
19 c11bf000 0 0 0 0000204 [IWAIT] irq8: rtc
18 c11bf20c 0 0 0 0000204 [IWAIT] irq7:
17 c11bf418 0 0 0 0000204 [IWAIT] irq6:
16 c1185000 0 0 0 0000204 [IWAIT] irq5:
15 c118520c 0 0 0 0000204 [IWAIT] irq4: sio0
14 c1185418 0 0 0 0000204 [IWAIT] irq3: sio1
13 c1185624 0 0 0 0000204 [CPU 0] irq1: atkbd0
12 c1185830 0 0 0 0000204 [IWAIT] irq0: clk
11 c1185a3c 0 0 0 000020c [Can run] idle
1 c1185c48 0 0 0 0004200 [RUNQ] init
10 c118b000 0 0 0 0000204 [SLPQ ktrace 0xc0605bf8][SLP] ktrace
0 c06052a0 0 0 0 0000200 [IWAIT] swapper
db> tr
Tracing pid 13 tid 100003 td 0xc1186a80
kdb_enter(c05d155d) at kdb_enter+0x2b
scgetc(c06263a0,2,1,c1239300,c0610280) at scgetc+0x498
sckbdevent(c0610280,0,c06263a0) at sckbdevent+0x1c8
atkbd_intr(c0610280,0,d3a86d10,c048cdd5,c0610280) at atkbd_intr+0x20
atkbdintr(c0610280) at atkbdintr+0x16
ithread_loop(c1183d00,d3a86d38) at ithread_loop+0x145
fork_exit(c048cc90,c1183d00,d3a86d38) at fork_exit+0x70
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xd3a86d6c, ebp = 0 ---
--Apple-Mail-4-1000395906
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
--
Stefan Bethke <stb@lassitu.de> Fon +49 170 346 0140
--Apple-Mail-4-1000395906--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0046E5C3-22EE-4F5D-B2B0-DFF4F0157F6B>