Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 9 Mar 2021 14:53:11 -0600
From:      CyberLeo Kitsana <cyberleo@cyberleo.net>
To:        Doug Hardie <bc979@lafn.org>, FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: IPv6 Startup
Message-ID:  <07f8c8b6-fb5c-6662-66de-8d5ecd0cc1fd@cyberleo.net>
In-Reply-To: <3F059A72-F45B-43B1-8EE3-0176EE072054@sermon-archive.info>
References:  <3F059A72-F45B-43B1-8EE3-0176EE072054@sermon-archive.info>

next in thread | previous in thread | raw e-mail | index | archive | help
On 3/9/21 3:58 AM, Doug Hardie wrote:
> I have two systems on the same ethernet.  One is configured as a router, the other as a host.  rtadvd is running on the router, rtsold on the host, and route6d on both.  The router was up and running and I initiated tcpdump of ip6 packets on the interface.  Then I booted the host.  The results are interesting:

<snip>

> The question is, why are the host addresses being used before DAD is attempted?  It appears there could be some really interesting problems if the link-layer address actually was duplicated.  The problems would happen before DAD was even attempted?

I would posit that this is because the fe80:: addresses used in the
initial solicitation are derived from the MAC address of the interface,
and if you have two interfaces with the same MAC address on the same
subnet you have much bigger problems.
-- 
Fuzzy love,
-CyberLeo


Technical Administrator

CyberLeo.Net Webhosting
http://www.CyberLeo.Net

Element9 Communications
http://www.Element9.net


Furry Peace! - http://www.fur.com/peace/




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?07f8c8b6-fb5c-6662-66de-8d5ecd0cc1fd>