Date: Tue, 9 May 2017 14:42:28 +0100 From: Mike Wolman <mike@wolman.co.uk> To: Mori Hiroki <yamori813@yahoo.co.jp>, Aleksandr Rybalko <ray@ddteam.net> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: onion omega2+ Message-ID: <102de390-63ca-a156-2208-bea3d5eea0f9@wolman.co.uk> In-Reply-To: <5866.49154.qm@web101718.mail.ssk.yahoo.co.jp> References: <694efc3a-e183-35a1-a0bf-9a9c0d708826@wolman.co.uk> <CAJ1Oi8G%2BvTMBX4Ey=H=2WruXDjXjcyte5_n8T3VDdL=h8m7%2BVw@mail.gmail.com> <e92bc818-485f-d9fc-da2b-776bae2b0916@wolman.co.uk> <410144.69078.qm@web101716.mail.ssk.yahoo.co.jp> <fda8b792-f6c4-d0fb-5a99-d190cc3a4f39@wolman.co.uk> <128807.28836.qm@web101715.mail.ssk.yahoo.co.jp> <2d555385-8258-fd75-e4a3-a1e59bf86314@wolman.co.uk> <651873.78746.qm@web101702.mail.ssk.yahoo.co.jp> <CAJ1Oi8Hemuug5JRP9btUgs-MmCFgb-_qS0qrEW7h=BhPAYXpFQ@mail.gmail.com> <2c5cd01a-a8d4-3ffa-4e9c-2aad170574c1@wolman.co.uk> <39222.11970.qm@web101719.mail.ssk.yahoo.co.jp> <6f1b2d35-5d17-765a-6138-0ab85455fc09@wolman.co.uk> <5866.49154.qm@web101718.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok got somewhere with this
USB_STORAGE: 1 Storage Device(s) found
Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
*
*
Reading file "kernel.MT7628_FDT.uImage"
*
**
**
**
**
**
**
**
**
**
**
******
******
******************************************************************************************************************************************************************************************************************
****
*
FAT: 5654824 Bytes read
Omega2 # go
Usage:
go - start application at address 'addr'
Omega2 # go 0x80001000
## Starting application at 0x80001000 ...
I have tried with:
Omega2 # go 0x80001100
## Starting application at 0x80001100 ...
I have tried using the 0x80001000 for fatload as well:
USB_STORAGE: 1 Storage Device(s) found
Omega2 # help fatload
fatload <interface> <dev[:part]> <addr> <filename> [bytes]
- load binary file 'filename' from 'dev' on 'interface'
to address 'addr' from dos filesystem
Reading file "kernel.MT7628_FDT.uImage"
*
**
**
**
**
**
**
**
**
**
**
******
******
******************************************************************************************************************************************************************************************************************
****
*
FAT: 5654824 Bytes read
Omega2 # go 0x80001100
## Starting application at 0x80001100 ...
However:
Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
*
*
Reading file "kernel.MT7628_FDT.uImage"
*
**
**
**
**
**
**
**
**
**
**
******
******
******************************************************************************************************************************************************************************************************************
****
*
FAT: 5654824 Bytes read
Omega2 # bootm 0x80800000
## Booting image at 80800000 ...
Image Name: FreeBSD
Image Type: MIPS Linux Kernel Image (uncompressed)
Data Size: 5654760 Bytes = 5.4 MB
Load Address: 80001000
Entry Point: 80001100
Verifying Checksum ... OK
OK
No initrd
## Transferring control to Linux (at address 80001100) ...
## Giving linux memsize in MB, 128
Starting kernel ...
But it doesnt go any further
On 09/05/2017 14:20, Mori Hiroki wrote:
> Hi.
>
> One more.
>
> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
>
> Omega2 # bootm 0x80800000
>
> ----- Original Message -----
>> From: Mike Wolman <mike@wolman.co.uk>
>> To: Mori Hiroki <yamori813@yahoo.co.jp>; Aleksandr Rybalko <ray@ddteam.net>
>> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>
>> Date: 2017/5/9, Tue 22:01
>> Subject: Re: onion omega2+
>>
>>
>> No joy
>>
>> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
>> *
>> *
>> Reading file "kernel.MT7628_FDT.uImage"
>> *
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> **
>> ******
>> ******
>> ******************************************************************************************************************************************************************************************************************
>> ****
>> *
>> FAT: 5654824 Bytes read
>> Omega2 # bootm
>> ## Booting image at 80100000 ...
>> Bad Magic Number,CE6AE7C4
>>
>> I am going to get a different usb memory stick and rebuild the kernel
>> later on as i got an error when last writing to the usb memory key and
>> its quite old now so just want to eliminate it from testing.
>>
>>
>> On 09/05/2017 13:52, Mori Hiroki wrote:
>>> Hi.
>>>
>>> This is my sample operation get image from network and boot.
>>>
>>> RT3052 # tftpboot 0x80800000 Planex_MZK-WNH_kernel.kbin.oldlzma.uboot
>>> RT3052 # bootm
>>>
>>>
>>> I don't use USB support U-Boot. But I think fatload command argument is
>>> temporary memory address not kernel address.
>>>
>>> How about this.
>>>
>>> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
>>> Omega2 # bootm
>>>
>>> ----- Original Message -----
>>>> From: Mike Wolman <mike@wolman.co.uk>
>>>> To: Aleksandr Rybalko <ray@ddteam.net>; Mori Hiroki
>> <yamori813@yahoo.co.jp>
>>>> Cc: "freebsd-mips@freebsd.org"
>> <freebsd-mips@freebsd.org>
>>>> Date: 2017/5/9, Tue 20:48
>>>> Subject: Re: onion omega2+
>>>>
>>>>
>>>>
>>>>
>>>> Is it possible to exclude the compression of the kernel/image for
>>> now eg:
>>>> mkimage -A mips -C none -O linux -T kernel -a 0x80001000 -e
>>> 0x80001100 -n "FreeBSD" -d kernel.MT7628_FDT
>>> kernel.MT7628_FDT.uImage
>>>> I have just tried the above but when booting I get a Bad Magic
>>> Number.
>>>> Omega2 # fatload usb 0:1 0x80001000 kernel.MT7628_FDT.uImage
>>>> *
>>>> *
>>>> Reading file "kernel.MT7628_FDT.uImage"
>>>> *
>>>> **
>>>> **
>>>> **
>>>> **
>>>> **
>>>> **
>>>> **
>>>> **
>>>> **
>>>> **
>>>> ******
>>>> ******
>>>>
>> ******************************************************************************************************************************************************************************************************************
>>>> ****
>>>> *
>>>> FAT: 5654824 Bytes read
>>>> Omega2 # bootm 0x80001100
>>>> ## Booting image at 80001100 ...
>>>> Bad Magic Number,1C994480
>>>> Omega2 #
>>>>
>>>>
>>>> I have seen other examples starting a program directly with going to
>>> the address but this didnt work either:
>>>> Omega2 # go 0x80001100
>>>> ## Starting application at 0x80001100 ...
>>>>
>>>> omega freezes here.
>>>>
>>>>
>>>>
>>>>
>>>> On 09/05/2017 10:12, Aleksandr Rybalko wrote:
>>>>
>>>> Fix things in order :)
>>> Currently you have problem with LZMA, serial port later.
>>> So, find version of lzma used to build linux firmware, MIPS routers world
>> use about 5 incompatible versions. One of them, you can find here:
>> http://project.zrouter.org/hg/zrouter/file/9ac53695a44d/tools/oldlzma
>>>>>
>>>>>
>>>>>
>>>>> 2017-05-09 7:03 GMT+03:00 Mori Hiroki
>> <yamori813@yahoo.co.jp>:
>>>>> Hi Mike
>>>>>> Could you show u-boot printenv command result.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>> ----- Original Message -----
>>>>>>> From: Mike Wolman <mike@wolman.co.uk>
>>>>>>> To: Mori Hiroki <yamori813@yahoo.co.jp>;
>> "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org>
>>>>>>> Cc:
>>>>>>> Date: 2017/5/9, Tue 10:30
>>>>>>> Subject: Re: onion omega2+
>>>>>>>
>>>>>>> Hi Mori,
>>>>>>>
>>>>>>> When I compiled the world/kernel etc I used:
>>>>>>>
>>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT
>>>>>>> ../freebsd-wifi-build/build/ bin/build ralink
>>> buildkernel
>>>>>>> I checked the serial stuff was the same as the
>>> other configs in:
>>>>>>> https://github.com/freebsd/ freebsd-wifi-build/
>>>>>>> and they looked the same.
>>>>>>>
>>>>>>> The OMEGA2.dtsi file has:
>>>>>>>
>>>>>>> chosen {
>>>>>>> bootargs =
>> "console=ttyS0,115200";
>>>>>>> };
>>>>>>>
>>>>>>>
>>>>>>> And mt7628an.dtsi has: serial0 = &uartlite;
>>>>>>>
>>>>>>> I dont think im getting as far as worrying about
>>> the serial console at
>>>>>>> the moment and need to get the kernel to uncompress
>>> first.
>>>>>>> Mike.
>>>>>>>
>>>>>>>
>>>>>>> On 09/05/2017 02:20, Mori Hiroki wrote:
>>>>>>>> Hi Mike
>>>>>>>>
>>>>>>>> In FreeBSD is use serial0 dts item to console.
>>>>>>>>
>>>>>>>> I think good to use this at start.
>>>>>>>>
>>>>>>>> freebsd/sys/gnu/dts/mips/ MT7628.dts
>>>>>>>>
>>>>>>>> ----- Original Message -----
>>>>>>>>> From: Mike Wolman <mike@wolman.co.uk>
>>>>>>>>> To: Mori Hiroki <yamori813@yahoo.co.jp>;
>>>>>>> "freebsd-mips@freebsd.org"
>> <freebsd-mips@freebsd.org>
>>>>>>>>> Cc:
>>>>>>>>> Date: 2017/5/9, Tue 09:25
>>>>>>>>> Subject: Re: onion omega2+
>>>>>>>>>
>>>>>>>>> Hi Mori,
>>>>>>>>>
>>>>>>>>> I grabbed the dts files from:
>>>>>>>>>
>>>>>>>>> https://github.com/WereCatf/
>> source/tree/image/target/ linux/ramips/dts
>>>>>>> https://github.com/WereCatf/ source/blob/image/target/
>> linux/ramips/dts/OMEGA2P.dts
>>>>>>> https://github.com/WereCatf/ source/blob/image/target/
>> linux/ramips/dts/OMEGA2.dtsi
>>>>>>>>> If this is of any use from the default
>>> linux install on the flash:
>>>>>>>>> root@Omega-12BF:/proc# cat /proc/mtd
>>>>>>>>> dev: size erasesize name
>>>>>>>>> mtd0: 00030000 00010000 "u-boot"
>>>>>>>>> mtd1: 00010000 00010000 "u-boot-env"
>>>>>>>>> mtd2: 00010000 00010000 "factory"
>>>>>>>>> mtd3: 01fb0000 00010000 "firmware"
>>>>>>>>> mtd4: 00148842 00010000 "kernel"
>>>>>>>>> mtd5: 01e677be 00010000 "rootfs"
>>>>>>>>> mtd6: 01950000 00010000 "rootfs_data"
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> btw after posting i spotted and error in
>>> what i did with:
>>>>>>>>> mkimage -A mips -O linux -T kernel -C lzma
>>> \
>>>>>>>>> -a 0x80001000 -e 0x80001100 \
>>>>>>>>> -n "FreeBSD" -d
>>> kernel.MT7628_FDT.lzma
>>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>>
>>>>>>>>> I have redone this using the correct
>>> compressed kernel ie:
>>>>>>>>> mkimage -A mips -O linux -T kernel -C lzma
>>> \
>>>>>>>>> -a 0x80001000 -e 0x80001100 \
>>>>>>>>> -n "FreeBSD" -d
>>> kernel.MT7628_FDT.ulzma
>>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> But this didnt work.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 09/05/2017 01:17, Mori Hiroki wrote:
>>>>>>>>>> Hi.
>>>>>>>>>>
>>>>>>>>>> I think if U-Boot work memory make
>>> broken then
>>>>>>>>>> Uncompressing Kernel Image is NG.
>>>>>>>>>>
>>>>>>>>>> Some ARM U-Boot is use top address
>>> in work memory.
>>>>>>>>>> If this case your kernel start
>>> address to move to
>>>>>>>>>> after work memory. But I never see
>>> in MIPS.
>>>>>>>>>> And What is set FDT_DTS_FILE in
>>> your kernel configuration ?
>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>
>>>>>>>>>>> From: Mike Wolman
>> <mike@wolman.co.uk>
>>>>>>>>>>> To: freebsd-mips@freebsd.org
>>>>>>>>>>> Cc:
>>>>>>>>>>> Date: 2017/5/9, Tue 07:48
>>>>>>>>>>> Subject: Re: onion omega2+
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> More info in case anyone can
>>> point me in the right direction.
>>>>>>>>>>> I have found:
>>>>>>>>>>>
>>>>>>>>>>> https://forum.openwrt.org/
>> viewtopic.php?id=53865
>>>>>>>>>>> I have tried changing how lzma
>>> compresses the kernel by
>>>>>>> adding -d20 to
>>>>>>>>>>> the build scripts eg:
>>>>>>>>>>>
>>>>>>>>>>> /usr/local/bin/lzma e
>>>>>>>>>>>
>>>>>>> /home/mike/omega2/src/../root/
>> mipsel_ap/boot/kernel.MT7628_ FDT/kernel
>>>>>>>>> \
>>>>>>>>>>> /home/mike/omega2/src/../
>> tftpboot/kernel.MT7628_FDT. lzma
>>> -d20
>>>>>>>>>>> This did not work.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Looking at the onion omega conf
>>> I see that it uses mkuzip and
>>>>>>> not lzma
>>>>>>>>>>> with the following settings:
>>>>>>>>>>>
>>>>>>>>>>> X_FSIMAGE_CMD="mkuzip"
>>>>>>>>>>> X_FSIMAGE_ARGS="-L -d -s 65536
>>> -v"
>>>>>>>>>>> X_FSIMAGE_SUFFIX=".ulzma"
>>>>>>>>>>>
>>>>>>>>>>> So tried the following:
>>>>>>>>>>>
>>>>>>>>>>> mkuzip -L -d -s 65536 -v -o
>>> kernel.MT7628_FDT.ulzma
>>>>>>> kernel.MT7628_FDT
>>>>>>>>>>> mkimage -A mips -O linux -T
>>> kernel -C lzma \
>>>>>>>>>>> -a 0x80001000 -e 0x80001100
>>> \
>>>>>>>>>>> -n "FreeBSD" -d
>>> kernel.MT7628_FDT.lzma
>>>>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> But this did not work either.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 08/05/2017 19:41, Aleksandr
>>> Rybalko wrote:
>>>>>>>>>>>> Hi Mike!
>>>>>>>>>>>>
>>>>>>>>>>>> I see you have no "OK"
>>> after
>>>>>>> "Uncompressing Kernel
>>>>>>>>> Image
>>>>>>>>>>> ...", so
>>>>>>>>>>>> first point uboot
>>> decompressor fail.
>>>>>>>>>>>> Why fail? Because you have
>>> wrong base address in image:
>>>>>>>>>>>> Load Address: fffffff2
>>>>>>>>>>>> Entry Point: fffffff2
>>>>>>>>>>>> MIPS32 machines have RAM
>>> mapped to 0x80000000 address,
>>>>>>> so adding
>>>>>>>>> its
>>>>>>>>>>>> size, you will get max
>>> address (if 16MB, it will be
>>>>>>> 0x81000000),
>>>>>>>>> but
>>>>>>>>>>>> you uboot image was
>>> created with 0xfffffff2.
>>>>>>>>>>>> Even more, unpacked kernel
>>> expects it will be called at
>>>>>>>>> 0x80001100. so
>>>>>>>>>>>> if you have ELF kernel
>>> (file with ELF header, like
>>>>>>> every
>>>>>>>>> executable)
>>>>>>>>>>>> that file have to be
>>> loaded at (0x80001100 -
>>>>>>> ELF_HEADER_SIZE).
>>>>>>>>>>>> In most cases it will be
>>> 0x80001100 - 0x100 =
>>>>>>> 0x80001000. But
>>>>>>>>> sometime
>>>>>>>>>>>> (I did not found why) it
>>> can be 0x20, you can find it
>>>>>>> by looking
>>>>>>>>> at
>>>>>>>>>>>> .text section in readelf
>>> -S.
>>>>>>>>>>>> So if you have kernel with
>>> entry point 0x80001100 and
>>>>>>> .text
>>>>>>>>> segment
>>>>>>>>>>>> offset 0x100, you have to
>>> create uboot image with load
>>>>>>> address
>>>>>>>>>>>> 0x80001000 and entry point
>>> 0x80001100.
>>>>>>>>>>>> If that step successful
>>> you will get:
>>>>>>>>>>>> /Uncompressing Kernel
>>> Image/ ... OK
>>>>>>>>>>>> Starting kernel ...
>>>>>>>>>>>>
>>>>>>>>>>>> Last line mean, uboot did
>>> jump into kernel code.
>>>>>>>>>>>> Good luck.
>>>>>>>>>>>>
>>>>>>>>>>>> 2017-05-07 18:20 GMT+03:00
>>> Mike Wolman
>>>>>>> <mike@wolman.co.uk
>>>>>>>>>>>>
>> <mailto:mike@wolman.co.uk>>:
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> I am trying to get
>>> FreeBSD working on this board -
>>>>>>> I think I
>>>>>>>>> am
>>>>>>>>>>>> almost there in
>>> getting it working but need some
>>>>>>> help please.
>>>>>>>>>>>> I have followed
>>> instructions from the
>>>>>>> freebsd-wifi-build and
>>>>>>>>>>>> *think* I have got
>>> everything correct - I am trying
>>>>>>> to do
>>>>>>>>> this on
>>>>>>>>>>>> a CURRENT setup:
>>>>>>>>>>>>
>>>>>>>>>>>> FreeBSD
>>> f64-current.mw.office 12.0-CURRENT FreeBSD
>>>>>>>>> 12.0-CURRENT #0
>>>>>>>>>>>> r317887: Sun May 7
>>> 03:20:34 UTC 2017
>>>>>>>>>>>>
>>>>>>>>> mike@f64-current.mw.office:/
>> usr/obj/usr/src/sys/GENERIC- NODEBUG amd64
>>>>>>>>>>>> $ cat
>>> ~/.freebsd-wifi-build- settings.cfg
>>>>>>>>>>>> X_SKIP_MORE_STUFF=YES
>>>>>>>>>>>>
>>> X_EXTRA_SRC_CONF=~/omega2/src. conf
>>>>>>>>>>>> $ cat
>>> ~/omega2/src.conf
>>>>>>>>>>>> WITHOUT_CLANG=YES
>>>>>>>>>>>> WITHOUT_CLANG_FULL=YES
>>>>>>>>>>>>
>>>>>>>>>>>> get dts files from
>>> thread
>>>>>>>>>>>>
>>>>>>> http://community.onion.io/ topic/1099/openwrt-on-the-
>> omega-2/8
>>>>>>>>>>>>
>>>>>>>>> <http://community.onion.io/
>> topic/1099/openwrt-on-the- omega-2/8>
>>>>>>>>>>>> cd
>>> ~/omega2/src/sys/gnu/dts/mips
>>>>>>>>>>>> fetch
>>>>>>>>>>>>
>>>>>>> https://raw.githubusercontent. com/WereCatf/source/image/
>> target/linux/ramips/dts/ OMEGA2.dtsi
>>>>>>>>>>>>
>>>>>>> <https://raw. githubusercontent.com/
>> WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dtsi>
>>>>>>>>>>>> fetch
>>>>>>>>>>>>
>>>>>>> https://raw.githubusercontent. com/WereCatf/source/image/
>> target/linux/ramips/dts/ OMEGA2.dts
>>>>>>>>>>>>
>>>>>>> <https://raw. githubusercontent.com/
>> WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dts>
>>>>>>>>>>>> fetch
>>>>>>>>>>>>
>>>>>>> https://raw.githubusercontent. com/WereCatf/source/image/
>> target/linux/ramips/dts/ OMEGA2P.dts
>>>>>>>>>>>>
>>>>>>> <https://raw. githubusercontent.com/
>> WereCatf/source/image/target/ linux/ramips/dts/OMEGA2P.dts>
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> buildworld
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> buildkernel
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> installworld
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> installkernel
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> distribution
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> mfsroot
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>>> fsimage
>>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>>> KERNCONF=MT7628_FDT
>>>>>>>>>>>>
>>> ../freebsd-wifi-build/build/ bin/build ralink uboot
>>>>>>>>>>>> Create flash:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>> X_FLASH=kernel.MT7628_FDT. lzma.flash
>>>>>>>>>>>> dd if=/dev/zero bs=$((
>>> 0x200000 )) count=1
>>>>>>> of=${X_FLASH}
>>>>>>>>>>>> dd
>>> if=kernel.MT7628_FDT.lzma. uImage of=${X_FLASH}
>>>>>>>>> conv=notrunc
>>>>>>>>>>>> dd if=
>>> mfsroot-ralink.img.lzma >> ${X_FLASH}
>>>>>>>>>>>> $ readelf -h
>>> kernel.MT7628_FDT | grep Entry
>>>>>>>>>>>> Entry point
>>> address: 0x80001100
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Now on the omega over
>>> serial - I didnt get the
>>>>>>> network
>>>>>>>>> expansion
>>>>>>>>>>>> doc thing so am doing
>>> stuff with usb rather than
>>>>>>> tftp
>>>>>>>>>>>> I am not 100% sure
>>> about the 0x80001100 and the
>>>>>>> fatload and
>>>>>>>>> have
>>>>>>>>>>>> tried this
>>>>>>>>>>>>
>>>>>>>>>>>> Omega2 # fatload usb
>>> 0:1 0x80001100
>>>>>>>>> /kernel.MT7628_FDT.lzma.flash
>>>>>>>>>>>> *
>>>>>>>>>>>> *
>>>>>>>>>>>> Reading file
>>>>>>> "/kernel.MT7628_FDT.lzma. flash"
>>>>>>>>>>>> *
>>>>>>>>>>>> **
>>>>>>>>>>>> **
>>>>>>>>>>>> **
>>>>>>>>>>>> ******
>>>>>>>>>>>>
>>>>>>> ******************************
>> ****************************** ******************************
>> ****************************** *********************
>>>>>>>>>>>> ******
>>>>>>>>>>>> *
>>>>>>>>>>>> FAT: 2108463 Bytes
>>> read
>>>>>>>>>>>> Omega2 # bootm
>>> 0x80001100
>>>>>>>>>>>> ## Booting image at
>>> 80001100 ...
>>>>>>>>>>>> Image Name:
>>> FreeBSD
>>>>>>>>>>>> Image Type: MIPS
>>> Linux Kernel Image (lzma
>>>>>>> compressed)
>>>>>>>>>>>> Data Size:
>>> 1365122 Bytes = 1.3 MB
>>>>>>>>>>>> Load Address:
>>> fffffff2
>>>>>>>>>>>> Entry Point:
>>> fffffff2
>>>>>>>>>>>> Verifying Checksum
>>> ... OK
>>>>>>>>>>>> Uncompressing
>>> Kernel Image ...
>>>>>>>>>>>> At this point nothing
>>> happens and console hangs -
>>>>>>> note in
>>>>>>>>>>>> OMEGA2.dtsithe console
>>> is set to ttyS0:
>>>>>>>>>>>> bootargs =
>>> "console=ttyS0,115200";
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I have also tried with
>>> just kernel.MT7628_FDT and
>>>>>>>>>>>> kernel.MT7628_FDT.lzma
>>> but both fail:
>>>>>>>>>>>> Omega2 # fatload usb
>>> 0:1 0x80001100
>>>>>>>>> /kernel.MT7628_FDT.lzma.uImage
>>>>>>>>>>>> *
>>>>>>>>>>>> *
>>>>>>>>>>>> Reading file
>>>>>>> "/kernel.MT7628_FDT.lzma. uImage"
>>>>>>>>>>>> *
>>>>>>>>>>>> **
>>>>>>>>>>>> **
>>>>>>>>>>>> ******
>>>>>>>>>>>>
>>>>>>> ******************************
>> ****************************** ******************************
>> ****************************** ******
>>>>>>>>>>>> **********
>>>>>>>>>>>> *
>>>>>>>>>>>> FAT: 1365186 Bytes
>>> read
>>>>>>>>>>>> Omega2 # bootm
>>> 0x80001100
>>>>>>>>>>>> ## Booting image at
>>> 80001100 ...
>>>>>>>>>>>> Image Name:
>>> FreeBSD
>>>>>>>>>>>> Image Type: MIPS
>>> Linux Kernel Image (lzma
>>>>>>> compressed)
>>>>>>>>>>>> Data Size:
>>> 1365122 Bytes = 1.3 MB
>>>>>>>>>>>> Load Address:
>>> fffffff2
>>>>>>>>>>>> Entry Point:
>>> fffffff2
>>>>>>>>>>>> Verifying Checksum
>>> ... OK
>>>>>>>>>>>> Uncompressing
>>> Kernel Image ...
>>>>>>>>>>>> A few comments on the
>>> hardware for anyone who wants
>>>>>>> to get
>>>>>>>>> one:
>>>>>>>>>>>> Get the expansion dock
>>> with serial port access -
>>>>>>> the power
>>>>>>>>> dock
>>>>>>>>>>>> does not provide
>>> serial access - i think it is
>>>>>>> possible to
>>>>>>>>> use an
>>>>>>>>>>>> ftdi ttl serial
>>> chip/cable but have not tried.
>>>>>>>>>>>> Stupidly I forgot this
>>> only has wifi access so you
>>>>>>> are not
>>>>>>>>> able to
>>>>>>>>>>>> tftp boot this without
>>> getting the ethernet network
>>>>>>> expansion
>>>>>>>>> but
>>>>>>>>>>>> loading stuff up from
>>> a usb memory stick is seem
>>>>>>> fine from
>>>>>>>>> u-boot.
>>>>>>>>>>>> I do not think that it
>>> is possible to boot from the
>>>>>>> SD card
>>>>>>>>> on the
>>>>>>>>>>>> Omega2+ - which is a
>>> shame.
>>>>>>>>>>>> Thanks for reading,
>>>>>>>>>>>>
>>>>>>>>>>>> Mike.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>> ______________________________ _________________
>>>>>>>>>>>> freebsd-mips@freebsd.org
>>>>>>>>> <mailto:freebsd-mips@freebsd. org>mailing
>>>>>>>>>>> list
>>>>>>>>>>>>
>>>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>>>>>>>>>>
>>>>>>>>> <https://lists.freebsd.org/
>> mailman/listinfo/freebsd-mips>
>>>>>>>>>>>> To unsubscribe, send
>>> any mail to
>>>>>>>>>>>>
>> "freebsd-mips-unsubscribe@ freebsd.org
>>>>>>>>>>>>
>>>>>>> <mailto:freebsd-mips- unsubscribe@freebsd.org>"
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> WBW
>>>>>>>>>>>> -------
>>>>>>>>>>>> Rybalko Aleksandr
>> <ray@ddteam.net
>>>>>>>>> <mailto:ray@ddteam.net>>
>>>>>>>>>>> ______________________________
>> _________________
>>>>>>>>>>> freebsd-mips@freebsd.org mailing list
>>>>>>>>>>> https://lists.freebsd.org/
>> mailman/listinfo/freebsd-mips
>>>>>>>>>>> To unsubscribe, send any mail to
>>>>>>>>>>> "freebsd-mips-unsubscribe@
>> freebsd.org"
>>>>>> ______________________________ _________________
>>>>>> freebsd-mips@freebsd.org mailing list
>>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>>>> To unsubscribe, send any mail to
>> "freebsd-mips-unsubscribe@ freebsd.org"
>>>>> --
>>>>>
>>>>> WBW
>>>>> -------
>>>>> Rybalko Aleksandr <ray@ddteam.net>
>>>>>
>>>>>
>>>>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?102de390-63ca-a156-2208-bea3d5eea0f9>