Date: Mon, 09 Feb 2004 11:12:20 +0200 From: Nelis Lamprecht <nelis@8ball.co.za> To: FreeBSD Questions Mail List <questions@freebsd.org> Subject: builworld failure after cvsup on 4.9 Message-ID: <1076317940.274.404.camel@enigma.8ball.co.za>
next in thread | raw e-mail | index | archive | help
--=-S/V05mlxiw+Ovs2sKFbp
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Hi,
I am busy setting up a new dual HP server ( ML350 Xeon 2.8ghz ) and have
cvsup the latest source and compiling just the basic options to get SMP
working so I can continue my work. Make buildworld is failing with the
following error which makes no sense to me. ( using FreeBSD 4.9 -
RELENG_4 )
=3D=3D=3D> usr.bin
"/usr/src/share/mk/bsd.subdir.mk", line 60: Inconsistent operator for
ftp
make: fatal errors encountered -- cannot continue
*** Error code 1
=20
Stop in /usr/src.
*** Error code 1
=20
Stop in /usr/src.
*** Error code 1
=20
Stop in /usr/src.
The line/s in question:
${SUBDIR}::
@if test -d ${.TARGET}.${MACHINE_ARCH}; then \
cd ${.CURDIR}/${.TARGET}.${MACHINE_ARCH}; \
else \
cd ${.CURDIR}/${.TARGET}; \
fi; \
${MAKE} all
Any idea's ?
Below is my kernel config:
machine i386
cpu I686_CPU
ident GUARDIAN
maxusers 0
=
=20
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big
directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=3D5000 #Delay (in ms) before probing
SCSI
options UCONSOLE #Allow users to grab the console
options USER_LDT #allow user-level control of
i386 ldt
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in
debug
=20
# Firewall support.
#options IPFILTER
#options IPFILTER_LOG
#options IPFILTER_DEFAULT_BLOCK
=20
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor
Kernel
options APIC_IO # Symmetric (APIC) I/O
=20
device isa
device pci
=20
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
=20
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
=20
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
=20
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device pass # Passthrough device (direct SCSI
access)
=20
# RAID controllers interfaced to the SCSI subsystem
device ciss # Compaq SmartRAID 5* series
=20
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
=20
device vga0 at isa?
=20
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
=20
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
=20
# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
=20
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
=20
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
=20
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus support
device bge # Broadcom BCM570x (``Tigon III'')
=20
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
=20
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
=20
# USB support
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus
and da
Thanks,
--=20
Nelis Lamprecht
PGP: http://www.8ball.co.za/pgpkey/nelis.asc
"Unix IS user friendly.. It's just selective about who its friends are."
--=-S/V05mlxiw+Ovs2sKFbp
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (FreeBSD)
iD8DBQBAJ070QfIMKiRMCrERAtVzAKC+4nL/kwelHmZnryi1mK3OwtLeeACfd29O
cCYTSssgP4UGJbRQ9ZX2NoY=
=qqEO
-----END PGP SIGNATURE-----
--=-S/V05mlxiw+Ovs2sKFbp--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1076317940.274.404.camel>