Date: Sat, 20 Nov 2004 13:21:47 +0800 From: Khairil Yusof <khairil@apdip.net> To: freebsd-mobile@freebsd.org Subject: FreeBSD 5.3 on Thinkpad X40 Message-ID: <1100928108.2680.30.camel@wolverine.cerebro.net.my>
next in thread | raw e-mail | index | archive | help
Has anybody gotten FreeBSD 5.3 to run ok on a Thinkpad X40?
Whenever I press any of the display keys (brightness, led light), volume
buttons, or the lcd is turned off either via folding lid or dpms, it
results in a freeze (both X or console).
I've tried disabling acpi and apic, but I can reproduce the lockup by
doing any of the above, even with them disabled. Removing power cord
also locks up the system.
Right now, I can do without any form of suspend features, as long as I
can just close the lid, or blank the lcd screen without locking up the
system.
Being a laptop newbie, some advice on where to start in tracking the
down the problem would be much appreciated.
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-STABLE #6: Fri Nov 19 16:18:16 MYT 2004
root@wolverine.cerebro.net.my:/usr/obj/usr/src/sys/WOLVERINE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.40GHz (1395.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 527302656 (502 MB)
avail memory = 506322944 (482 MB)
ACPI APIC Table: <IBM TP-1U >
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1U> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807
mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 16 at device 2.0 on
pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 16 at
device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci2: <base peripheral> at device 0.1 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x7000-0x703f mem 0xd0200000-0xd021ffff irq 20 at device 1.0 on pci2
em0: Ethernet address: 00:0a:e4:2a:76:19
em0: Speed:N/A Duplex:N/A
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem
0xd0100800-0xd01008ff,0xd0100c00-0xd0100dff irq 17 at device 31.5 on
pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 3
flags 0x10 on acpi0
sio0: type 16550A
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xdc000-0xdffff,0xcd800-0xce7ff,0xcc800-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ppc0: parallel port not found.
Timecounter "TSC" frequency 1395478256 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding disabled,
default to deny, logging limited to 100 packets/entry by default
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38154MB <HITACHI DK13FA-40B/00MCA0B4> [77520/16/63] at ata0-master
UDMA100
Mounting root from ufs:/dev/ad0s1a
syctl acpi:
acpibatt 1 1K 1K 1 16
acpidev 73 3K 3K 73 32
acpisem 23 2K 2K 23 64
acpitask 0 0K 1K 6052 16,32
acpica 3877 198K 199K 67925
16,32,64,128,256,512,1024,2048
debug.acpi.acpi_ca_version: 0x20040527
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S0
hw.acpi.lid_switch_state: S0
hw.acpi.standby_state: S0
hw.acpi.suspend_state: S0
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.throttle_max: 8
hw.acpi.cpu.throttle_state: 8
hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85
hw.acpi.cpu.cx_lowest: C3
hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00%
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 3242
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 3637
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3682
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1011744
dev.acpi.0.%desc: IBM TP-1U
dev.acpi.0.%driver: acpi
dev.acpi.0.%parent: nexus0
dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT
dev.acpi_ec.0.%driver: acpi_ec
dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPC_.EC__
dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0
dev.acpi_ec.0.%parent: acpi0
dev.acpi_sysresource.0.%desc: System Resource
dev.acpi_sysresource.0.%driver: acpi_sysresource
dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_
dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
dev.acpi_sysresource.0.%parent: acpi0
dev.acpi_sysresource.1.%desc: System Resource
dev.acpi_sysresource.1.%driver: acpi_sysresource
dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPC_.SIO_
dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0
dev.acpi_sysresource.1.%parent: acpi0
dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
dev.acpi_timer.0.%driver: acpi_timer
dev.acpi_timer.0.%location: unknown
dev.acpi_timer.0.%pnpinfo: unknown
dev.acpi_timer.0.%parent: acpi0
dev.cpu.0.%parent: acpi0
dev.acpi_tz.0.%desc: Thermal Zone
dev.acpi_tz.0.%driver: acpi_tz
dev.acpi_tz.0.%location: handle=\_TZ_.THM0
dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
dev.acpi_tz.0.%parent: acpi0
dev.acpi_lid.0.%desc: Control Method Lid Switch
dev.acpi_lid.0.%driver: acpi_lid
dev.acpi_lid.0.%location: handle=\_SB_.LID_
dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
dev.acpi_lid.0.%parent: acpi0
dev.acpi_lid.0.wake: 1
dev.acpi_button.0.%desc: Sleep Button
dev.acpi_button.0.%driver: acpi_button
dev.acpi_button.0.%location: handle=\_SB_.SLPB
dev.acpi_button.0.%pnpinfo: _HID=PNP0C0E _UID=0
dev.acpi_button.0.%parent: acpi0
dev.acpi_button.0.wake: 1
dev.pcib.0.%parent: acpi0
dev.atpic.0.%parent: acpi0
dev.attimer.0.%parent: acpi0
dev.attimer.1.%parent: acpi0
dev.atdma.0.%parent: acpi0
dev.npxisa.0.%parent: acpi0
dev.atkbdc.0.%parent: acpi0
dev.psmcpnp.0.%parent: acpi0
dev.sio.0.%parent: acpi0
dev.acpi_cmbat.0.%desc: Control Method Battery
dev.acpi_cmbat.0.%driver: acpi_cmbat
dev.acpi_cmbat.0.%location: handle=\_SB_.PCI0.LPC_.EC__.BAT0
dev.acpi_cmbat.0.%pnpinfo: _HID=PNP0C0A _UID=0
dev.acpi_cmbat.0.%parent: acpi0
dev.acpi_acad.0.%desc: AC Adapter
dev.acpi_acad.0.%driver: acpi_acad
dev.acpi_acad.0.%location: handle=\_SB_.PCI0.LPC_.EC__.AC__
dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
dev.acpi_acad.0.%parent: acpi0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1100928108.2680.30.camel>