Date: Tue, 08 Nov 2005 22:21:23 +0300 From: Vladimir Grebenschikov <vova@fbsd.ru> To: Maksim Yevmenkin <maksim.yevmenkin@savvis.net> Cc: freebsd-bluetooth@freebsd.org Subject: Re: [RFC] rc.d integration for the bluetooth subsystem Message-ID: <1131477683.1231.12.camel@localhost> In-Reply-To: <4370E826.7090007@savvis.net> References: <43519460.1090605@ebs.gr> <1129491219.1616.18.camel@localhost> <4353DBBC.2000508@savvis.net> <1131433259.1164.7.camel@localhost> <4370E826.7090007@savvis.net>
next in thread | previous in thread | raw e-mail | index | archive | help
=F7 =D7=D4, 08/11/2005 =D7 10:02 -0800, Maksim Yevmenkin =D0=C9=DB=C5=D4: > Vladimir, >=20 > [...] >=20 > > After recent upgrade of 7-CURRENT I have do not working bthidd. > >=20 > > Something bad on boot here. bthidd just not started or failed on boot. > > If I just turn off and then turn on USB bt dongle - it starts work. > >=20 > > No any related messages in /var/log/messages. >=20 > _nothing_ has changed in bluetooth code and i have _not_ committed any=20 > rc.d bluetooth scripts, so it must be something wrong with your setup.=20 > which bluetooth rc.d scripts are you using? original (posted by=20 > Panagiotis) or mine? Original. Nothing changed in my setup except=20 make world && mergemaster Probably something wrong with drivers, I've notice that ng bluetooth mice is disconnected without any notice. Reconnecting usb bluetooth device lead to following error: ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: Interface 0 endpoints: interrupt=3D0x81, bulk-in=3D0x82, bulk-out=3D0= x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=3D0x83, isoc-out=3D0x3; wMaxPacketSize=3D49; nframes=3D6, buffer size=3D294 ng_ubt_connect: ubt0 - Could not start interrupt transfer. NOMEM (5) And after that error bt stack does not work until reboot, reconnecting dongle does not helps. Boot scenario was: booting ... ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: Interface 0 endpoints: interrupt=3D0x81, bulk-in=3D0x82, bulk-out=3D0= x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=3D0x83, isoc-out=3D0x3; wMaxPacketSize=3D49; nframes=3D6, buffer size=3D294 Timecounter "TSC" frequency 1686969804 Hz quality 800 ... Trying to mount root from ufs:/dev/ad0s4a WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ... there bthidd started but does not connect mice. I have turned on-board bt off, then on by notebook switch. kernel printed: ubt_bulk_in_complete2: ubt0 - Bulk-in xfer failed, IOERROR (13). No new xfe= r will be submitted! ubt_intr_complete2: ubt0 - Interrupt xfer failed, IOERROR (13). No new xfer= will be submitted! ubt0: at uhub2 port 2 (addr 2) disconnected ubt0: detached ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: Interface 0 endpoints: interrupt=3D0x81, bulk-in=3D0x82, bulk-out=3D0= x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=3D0x83, isoc-out=3D0x3;= wMaxPacketSize=3D49; nframes=3D6, buffer size=3D294 kbd2 at vkbd0 BT mice start work here. after some hours of work it stop moving and l2pings also. Trying restart BT stack lead to error:=20 ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: ALPS UGX, rev 1.10/7.81, addr 2 ubt0: Interface 0 endpoints: interrupt=3D0x81, bulk-in=3D0x82, bulk-out=3D0= x2 ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=3D0x83, isoc-out=3D0x3; wMaxPacketSize=3D49; nframes=3D6, buffer size=3D294 ng_ubt_connect: ubt0 - Could not start interrupt transfer. NOMEM (5) as all following tries It was much better before. (I am using this mice for long time). > [...] >=20 > > Does anybody has working on boot bthidd with recent scripts ?=20 >=20 > once more bthidd(8) is _not_ connected to the build and _not_ installed=20 > by default. this is still work in progress. once bthid(8) is finished it=20 > will be connected to the build and installed by default. at this point=20 > we will integrate it into rc.d. Ok, so we are talking only about posted here scripts. > thanks, > max --=20 Vladimir B. Grebenschikov vova@fbsd.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1131477683.1231.12.camel>