Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 3 Feb 2003 09:59:34 -0500 (EST)
From:      lilpuppie@mindspring.com
To:        freebsd-questions@FreeBSD.ORG
Subject:   make buildkernel compile problems, stop in umass.c
Message-ID:  <140480.1044284374850.JavaMail.nobody@wamui02.slb.atl.earthlink.net>

next in thread | raw e-mail | index | archive | help
Hello,

	I've got a 4.4-RC server that I'm attempting to upgrade all the source on. I'm following the directions found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html  to the letter to do this. My make buildworld went just fine, although I can't seem to get past this make buildkernel compile problem. I CVSup'd on February 1st 2003 at around 6:00pm. It keeps failing on umass.c, the below is the offending output of the build:


===> umass
cc -O -pipe   -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I-  -I. -I@ -I@/../include  -mpreferred-stack-boundary=2 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -ansi -c /usr/src/sys/modules/umass/../../dev/usb/umass.c
/usr/src/sys/modules/umass/../../dev/usb/umass.c:380: syntax error before `{'
/usr/src/sys/modules/umass/../../dev/usb/umass.c:383: warning: no semicolon at end of struct or union
/usr/src/sys/modules/umass/../../dev/usb/umass.c:426: syntax error before `}'
*** Error code 1
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error


I don't need this, as to my knowledge it's only a USB Mass Storage driver and it isn't a dependency of anything else (I'm assuming). I've commented out all the USB drivers in both my custom and GENERIC kernel config files, and tried building with both but it fails with exactly the same message (why is it even trying to make it?). I'm using no special switches to make, simply make buildkernel KERNCONF=GENERIC with the possible exception of make.conf (see below). Some system information follows.


uname -a output: (hostnames have been changed)

FreeBSD listserv.local.com 4.4-RC FreeBSD 4.4-RC #0: Fri Dec 21 18:11:25 EST 2001     
root at listserv.local.com:/usr/src/sys/compile/LISTSERV  i386


make.conf:

NOPROFILE=    true     #    Avoid compiling profiled libraries
CFLAGS= -O -PIPE

My GENERIC conf file:

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.50 2002/12/30 19:04:31 rwatson Exp $

machine		i386
cpu		I386_CPU
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		GENERIC
maxusers	0

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug 
					# output.  Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		isp		# Qlogic family
device		mpt		# LSI-Logic MPT/Fusion
device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets)
options 	SYM_SETUP_LP_PROBE_MAP=0x40
				# Allow ncr to attach legacy NCR devices when 
				# both sym and ncr are configured

device		adv0	at isa?
device		adw
device		bt0	at isa?
device		aha0	at isa?
device		aic0	at isa?

device		ncv		# NCR 53C500
device		nsp		# Workbit Ninja SCSI-3
device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		dpt		# DPT Smartcache - See LINT for options!
device		iir		# Intel Integrated RAID
device		mly		# Mylex AcceleRAID/eXtremeRAID
device		ciss		# Compaq SmartRAID 5* series

# RAID controllers
device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
device		aacp		# SCSI passthrough for aac (requires CAM)
device		ida		# Compaq Smart RAID
device		amr		# AMI MegaRAID
device		mlx		# Mylex DAC960 family
device		twe		# 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0	at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device		card
#device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
#device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 NICs
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		# Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
device		ex
device		ep
device		fe0	at isa? port 0x300
# Xircom Ethernet
device		xe
# PRISM I IEEE 802.11b wireless NIC.
device		awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
device		lnc0	at isa? port 0x280 irq 10 drq 0
device		cs0	at isa? port 0x300
device		sn0	at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
#device		uhci		# UHCI PCI->USB interface
#device		ohci		# OHCI PCI->USB interface
#device		usb		# USB Bus (required)
#device		ugen		# Generic
#device		uhid		# "Human Interface Devices"
#device		ukbd		# Keyboard
#device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
#device		uscanner	# Scanners
#device		urio		# Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet



I am happy to provide any other information if it helps. Thank you!



--Jeremy Olmen
lilpuppie at mindspring dot com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?140480.1044284374850.JavaMail.nobody>