Date: Thu, 18 Feb 2016 13:01:37 -0700 From: Ian Lepore <ian@freebsd.org> To: Russell Haley <russ.haley@gmail.com>, Tom Sparks <tom@ycombinator.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Hummingboard boot hangs in -HEAD Message-ID: <1455825697.1294.20.camel@freebsd.org> In-Reply-To: <CABx9NuRdJxs1fN69k%2B4eSg5Ei%2BJwi=ptVzgs%2BXgZWuP61zMFRA@mail.gmail.com> References: <CABLy0qSyfe-j%2Bwh6OGa2Dv5EfX_SQF2xkTeX_zOV2PmawL_dyw@mail.gmail.com> <CABx9NuRdJxs1fN69k%2B4eSg5Ei%2BJwi=ptVzgs%2BXgZWuP61zMFRA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The hummingboard (really, all imx6 systems) problem showed up between r295351 - r295543, but I haven't had time to narrow it down more than that. Sata has never worked on imx6. I had limited success with it 2 years ago (it kinda worked but there was data corruption), ran out of time and set it aside, and have never gotten back to the driver to finish getting it working. -- Ian On Thu, 2016-02-18 at 11:57 -0800, Russell Haley wrote: > My hummingboard booted two days ago using r294912. The image is here: > ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv6/ISO-IMAGES/11.0 > /FreeBSD-11.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20160127 > -r294912.img.xz. > I was also able to buildworld and buildkernel using whatever head was > at the time. I don't have it in front of me to check the revision and > I have not replaced the kernel in the image with my fresh build so I > can't say if it works. > > I'm still not able to see my m.2 ssd if anyone is listening and > willing to help me. > > Russ > > On Thu, Feb 18, 2016 at 11:40 AM, Tom Sparks <tom@ycombinator.com> > wrote: > > I'd initially thought that it was my build that had failed so I > > snagged an > > image from ftp.freebsd.org and no, that image fails to boot to > > multiuser as > > well. > > > > > > Here's where it hangs: > > --- snip --- > > usbus0: 480Mbps High Speed USB v2.0 > > usbus1: 480Mbps High Speed USB v2.0 > > ugen1.1: <Freescale> at usbus1 > > uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> > > on usbus1 > > ugen0.1: <Freescale> at usbus0 > > uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> > > on usbus0 > > hdmi0: i2c transfer failed: 2 > > fb0: failed to get EDID info from HDMI framer > > fbd0 on fb0 > > VT: initialize with new VT driver "fb". > > uhub0: 1 port with 1 removable, self powered > > --- snip --- > > > > with boot -v I get a bit further: > > --- snip --- > > VT: initialize with new VT driver "fb". > > random: harvesting attach, 8 bytes (4 bits) from fbd0 > > uhub0: 1 port with 1 removable, self powered > > random: harvesting attach, 8 bytes (4 bits) from uhub0 > > --- snip --- > > > > Then a while later, some other stuff appears: > > > > --- snip --- > > uhub0: 1 port with 1 removable, self powered > > random: harvesting attach, 8 bytes (4 bits) from uhub0 > > sdhci_imx0-slot0: Divider 250 for freq 400000 (base 200000000) > > mmc0: Probing bus > > uhub1: 1 port with 1 removable, self powered > > random: harvesting attach, 8 bytes (4 bits) from uhub1 > > --- snip --- > > > > Supposition is that this broke in the range of r295351 through > > r29554. > > > > Anyone? > > > > -- > > Tom Sparks > > Systems Engineer > > _______________________________________________ > > freebsd-arm@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > > To unsubscribe, send any mail to " > > freebsd-arm-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org > "
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1455825697.1294.20.camel>